error while executing CPRS

While running Xinetd on FOIA-VistA on gtm we got following error. "Non-empty value assigned to $ECODE (user-defined error trap) At M source location BREAD+15^XWBRW" Does anybody encounter the same error? -Jignesh
like0

Comments

error while executing CPRS

Nancy Anthracite's picture

Look at the log file for the xinetd connection which is probably defined in
the "server" code in the xinetd connection file in /etc/xinetd.d/

--
Nancy Anthracite

On Monday, February 20, 2012, Jignesh Patel wrote:
> While running Xinetd on FOIA-VistA on gtm we got following error.
>
> "Non-empty value assigned to $ECODE (user-defined error trap) At M source
> location BREAD+15^XWBRW"
>
>
> Does anybody encounter the same error?
>
>
> -Jignesh

like0

error while executing CPRS

Jignesh Patel's picture

Nancy are you talking about this file.
[ecloud@s1-iCare-VistA1 xinetd.d]$ cat EHR-gui
service EHR-gui
{
port = 9230
socket_type = stream
protocol = tcp
user = ecloud
server = /home/ecloud/Downloads/VistA/EHR-gui
type = UNLISTED
wait = no
disable = no
}

On Mon, Feb 20, 2012 at 5:37 PM, Nancy Anthracite <nanthracite@earthlink.net
> wrote:

> Look at the log file for the xinetd connection which is probably defined in
> the "server" code in the xinetd connection file in /etc/xinetd.d/
>
> --
> Nancy Anthracite
>
> On Monday, February 20, 2012, Jignesh Patel wrote:
> > While running Xinetd on FOIA-VistA on gtm we got following error.
> >
> > "Non-empty value assigned to $ECODE (user-defined error trap) At M source
> > location BREAD+15^XWBRW"
> >
> >
> > Does anybody encounter the same error?
> >
> >
> > -Jignesh
>
>

like0

error while executing CPRS

Nancy Anthracite's picture

Now show me the contents of the file /home/ecloud/Downloads/VistA/EHR-gui

--
Nancy Anthracite

On Tuesday, February 21, 2012, Jignesh Patel wrote:
> Nancy are you talking about this file.
> [ecloud@s1-iCare-VistA1 xinetd.d]$ cat EHR-gui
> service EHR-gui
> {
> port = 9230
> socket_type = stream
> protocol = tcp
> user = ecloud
> server = /home/ecloud/Downloads/VistA/EHR-gui
> type = UNLISTED
> wait = no
> disable = no
> }
>
> On Mon, Feb 20, 2012 at 5:37 PM, Nancy Anthracite
> <nanthracite@earthlink.net
>
> > wrote:
> >
> > Look at the log file for the xinetd connection which is probably defined
> > in the "server" code in the xinetd connection file in /etc/xinetd.d/
> >
> > --
> > Nancy Anthracite
> >
> > On Monday, February 20, 2012, Jignesh Patel wrote:
> > > While running Xinetd on FOIA-VistA on gtm we got following error.
> > >
> > > "Non-empty value assigned to $ECODE (user-defined error trap) At M
> > > source location BREAD+15^XWBRW"
> > >
> > >
> > > Does anybody encounter the same error?
> > >
> > >
> > > -Jignesh

like0

error while executing CPRS

Jignesh Patel's picture

Nancy,

Here you go. The locale information is being placed into the EHR-gui to
make sure it should be taken as somehow GT.M was ignoring UTF-8
------------------------------------------------------------------------------------------------------------------
#!/bin/bash
#EHR-gui: This is a file to run RPCBroker as a Linux service
#make sure of our directory
cd /home/ecloud/Downloads/VistA
date >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
#Get the GTM profile
source /etc/profile.d/gtmprofile.sh
#set locale
export LANG=en_US.UTF-8
export LC_CTYPE=en_US.UTF-8
export LC_NUMERIC="en_US.UTF-8"
export LC_TIME="en_US.UTF-8"
export LC_COLLATE="en_US.UTF-8"
export LC_MONETARY="en_US.UTF-8"
export LC_MESSAGES="en_US.UTF-8"
export LC_PAPER="en_US.UTF-8"
export LC_NAME="en_US.UTF-8"
export LC_ADDRESS="en_US.UTF-8"
export LC_TELEPHONE="en_US.UTF-8"
export LC_MEASUREMENT="en_US.UTF-8"
export LC_IDENTIFICATION="en_US.UTF-8"
export LC_ALL=en_US.UTF-8
locale >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
#Run routine
$gtm_dist/mumps -run GTMLNX^XWBTCPM
2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log
-------------------------------------------------------------------------------------------------------------

When I run from command line

$gtm_dist/mumps -run GTMLNX^XWBTCPM
%GTM-E-SETECODE, Non-empty value assigned to $ECODE (user-defined error
trap)
At M source location BREAD+15^XWBRW

UTF8>

-Jignesh

On Tue, Feb 21, 2012 at 7:33 PM, Nancy Anthracite <nanthracite@earthlink.net
> wrote:

> Now show me the contents of the file /home/ecloud/Downloads/VistA/EHR-gui
>
> --
> Nancy Anthracite
>
> On Tuesday, February 21, 2012, Jignesh Patel wrote:
> > Nancy are you talking about this file.
> > [ecloud@s1-iCare-VistA1 xinetd.d]$ cat EHR-gui
> > service EHR-gui
> > {
> > port = 9230
> > socket_type = stream
> > protocol = tcp
> > user = ecloud
> > server = /home/ecloud/Downloads/VistA/EHR-gui
> > type = UNLISTED
> > wait = no
> > disable = no
> > }
> >
> > On Mon, Feb 20, 2012 at 5:37 PM, Nancy Anthracite
> > <nanthracite@earthlink.net
> >
> > > wrote:
> > >
> > > Look at the log file for the xinetd connection which is probably
> defined
> > > in the "server" code in the xinetd connection file in /etc/xinetd.d/
> > >
> > > --
> > > Nancy Anthracite
> > >
> > > On Monday, February 20, 2012, Jignesh Patel wrote:
> > > > While running Xinetd on FOIA-VistA on gtm we got following error.
> > > >
> > > > "Non-empty value assigned to $ECODE (user-defined error trap) At M
> > > > source location BREAD+15^XWBRW"
> > > >
> > > >
> > > > Does anybody encounter the same error?
> > > >
> > > >
> > > > -Jignesh
>
>

like0

contents of log file

Christopher Edwards's picture

Jignesh:

Can you post the contents of: /home/ecloud/Downloads/VistA/log/EHR-gui.log?

like0

error while executing CPRS

Nancy Anthracite's picture

Well, I understand there is a bug in the code so the error trap does not work
right so it is hard to know.

I have done a port of the FOIA from 12-6-11 and CPRS is connecting OK so I
don't know what to say until the error trap is working, and then it will
probably take someone else to say.

But, we might glean something from the debugger for the broker.

Do the following and then try to connect and see what you get in the log when
you run the View XWB Log option.

GTM>S DUZ=1 D ^XUP

Setting up programmer environment
This is a TEST account.

Terminal Type set to: C-VT220

Select OPTION NAME: eve
1 EVE Systems Manager Menu
2 EVENT CAPTURE ECX ECS MAINTENANCE Event Capture
3 EVENT CAPTURE (ECS) EXTRACT AU ECX ECS SOURCE AUDIT Event
Capture
(ECS) Extract Audit
4 EVENT CAPTURE DATA ENTRY ECENTER Event Capture Data Entry
5 EVENT CAPTURE EXTRACT ECXEC Event Capture Extract
Press <RETURN> to see more, '^' to exit this list, OR
CHOOSE 1-5: 1 EVE Systems Manager Menu

Core Applications ...
Device Management ...
Menu Management ...
Programmer Options ...
Operations Management ...
Spool Management ...
Information Security Officer Menu ...
Taskman Management ...
User Management ...
Application Utilities ...
Capacity Planning ...
HL7 Main Menu ...

You have PENDING ALERTS
Enter "VA to jump to VIEW ALERTS option

Select Systems Manager Menu Option: operations Management

System Status
Introductory text edit
CPU/Service/User/Device Stats
RJD Kill off a users' job
Alert Management ...
Alpha/Beta Test Option Usage Menu ...
Clean old Job Nodes in XUTL
Delete Old (>14 d) Alerts
Foundations Management
Kernel Management Menu ...
Post sign-in Text Edit
RPC Broker Management Menu ...
User Management Menu ...

You have PENDING ALERTS
Enter "VA to jump to VIEW ALERTS option

Select Operations Management Option: rpc Broker Management Menu

RPC Listener Edit
Start All RPC Broker Listeners
Stop All RPC Broker Listeners
Clear XWB Log Files
Debug Parameter Edit
View XWB Log

You have PENDING ALERTS
Enter "VA to jump to VIEW ALERTS option

Select RPC Broker Management Menu Option: debug Parameter Edit

--
Nancy Anthracite

On Tuesday, February 21, 2012, Jignesh Patel wrote:
> Nancy,
>
> Here you go. The locale information is being placed into the EHR-gui to
> make sure it should be taken as somehow GT.M was ignoring UTF-8
> ---------------------------------------------------------------------------
> --------------------------------------- #!/bin/bash
> #EHR-gui: This is a file to run RPCBroker as a Linux service
> #make sure of our directory
> cd /home/ecloud/Downloads/VistA
> date >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
> #Get the GTM profile
> source /etc/profile.d/gtmprofile.sh
> #set locale
> export LANG=en_US.UTF-8
> export LC_CTYPE=en_US.UTF-8
> export LC_NUMERIC="en_US.UTF-8"
> export LC_TIME="en_US.UTF-8"
> export LC_COLLATE="en_US.UTF-8"
> export LC_MONETARY="en_US.UTF-8"
> export LC_MESSAGES="en_US.UTF-8"
> export LC_PAPER="en_US.UTF-8"
> export LC_NAME="en_US.UTF-8"
> export LC_ADDRESS="en_US.UTF-8"
> export LC_TELEPHONE="en_US.UTF-8"
> export LC_MEASUREMENT="en_US.UTF-8"
> export LC_IDENTIFICATION="en_US.UTF-8"
> export LC_ALL=en_US.UTF-8
> locale >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
> #Run routine
> $gtm_dist/mumps -run GTMLNX^XWBTCPM
> 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log
> ---------------------------------------------------------------------------
> ----------------------------------
>
> When I run from command line
>
> $gtm_dist/mumps -run GTMLNX^XWBTCPM
> %GTM-E-SETECODE, Non-empty value assigned to $ECODE (user-defined error
> trap)
> At M source location BREAD+15^XWBRW
>
> UTF8>
>
>
>
>
> -Jignesh
>
> On Tue, Feb 21, 2012 at 7:33 PM, Nancy Anthracite
> <nanthracite@earthlink.net
>
> > wrote:
> >
> > Now show me the contents of the file /home/ecloud/Downloads/VistA/EHR-gui
> >
> > --
> > Nancy Anthracite
> >
> > On Tuesday, February 21, 2012, Jignesh Patel wrote:
> > > Nancy are you talking about this file.
> > > [ecloud@s1-iCare-VistA1 xinetd.d]$ cat EHR-gui
> > > service EHR-gui
> > >
> > > {
> > > port = 9230
> > > socket_type = stream
> > > protocol = tcp
> > > user = ecloud
> > > server = /home/ecloud/Downloads/VistA/EHR-gui
> > > type = UNLISTED
> > > wait = no
> > > disable = no
> > > }
> > >
> > > On Mon, Feb 20, 2012 at 5:37 PM, Nancy Anthracite
> > > <nanthracite@earthlink.net
> > >
> > > > wrote:
> > > >
> > > > Look at the log file for the xinetd connection which is probably
> >
> > defined
> >
> > > > in the "server" code in the xinetd connection file in /etc/xinetd.d/
> > > >
> > > > --
> > > > Nancy Anthracite
> > > >
> > > > On Monday, February 20, 2012, Jignesh Patel wrote:
> > > > > While running Xinetd on FOIA-VistA on gtm we got following error.
> > > > >
> > > > > "Non-empty value assigned to $ECODE (user-defined error trap) At M
> > > > > source location BREAD+15^XWBRW"
> > > > >
> > > > >
> > > > > Does anybody encounter the same error?
> > > > >
> > > > >
> > > > > -Jignesh

like0

UTF8?

Christopher Edwards's picture

I see that this is a UTF 8 database.  I seem to remember that there were some issues with UTF8 and the RPC broker.  Here is a article explaining what may be going on: http://smh101.blogspot.com/2011_05_01_archive.html

like0

error while executing CPRS

Jignesh Patel's picture

I see following in the log

Log from Job 30930 2 Lines
15:57:38 = Log start: Feb 22, 2012@15:57:38
15:57:38 = XWBTCPM

Log from Job 31002 2 Lines
15:57:48 = Log start: Feb 22, 2012@15:57:48
15:57:48 = XWBTCPM

Log from Job 31038 2 Lines
15:57:53 = Log start: Feb 22, 2012@15:57:53
15:57:53 = XWBTCPM

On Wed, Feb 22, 2012 at 10:55 AM, Jignesh Patel <jigneshmpatel@gmail.com>wrote:

> Nancy.
> Sorry I slept let yesterday. I have implemented the step you did mention.I
> have enabled RPC broker debug.
>
> Now what I need to do?
>
>
> On Wed, Feb 22, 2012 at 6:55 AM, Nancy Anthracite <
> nanthracite@earthlink.net> wrote:
>
>> Well, I understand there is a bug in the code so the error trap does not
>> work
>> right so it is hard to know.
>>
>> I have done a port of the FOIA from 12-6-11 and CPRS is connecting OK so I
>> don't know what to say until the error trap is working, and then it will
>> probably take someone else to say.
>>
>> But, we might glean something from the debugger for the broker.
>>
>> Do the following and then try to connect and see what you get in the log
>> when
>> you run the View XWB Log option.
>>
>>
>>
>> GTM>S DUZ=1 D ^XUP
>>
>> Setting up programmer environment
>> This is a TEST account.
>>
>> Terminal Type set to: C-VT220
>>
>> Select OPTION NAME: eve
>> 1 EVE Systems Manager Menu
>> 2 EVENT CAPTURE ECX ECS MAINTENANCE Event Capture
>> 3 EVENT CAPTURE (ECS) EXTRACT AU ECX ECS SOURCE AUDIT Event
>> Capture
>> (ECS) Extract Audit
>> 4 EVENT CAPTURE DATA ENTRY ECENTER Event Capture Data Entry
>> 5 EVENT CAPTURE EXTRACT ECXEC Event Capture Extract
>> Press <RETURN> to see more, '^' to exit this list, OR
>> CHOOSE 1-5: 1 EVE Systems Manager Menu
>>
>>
>> Core Applications ...
>> Device Management ...
>> Menu Management ...
>> Programmer Options ...
>> Operations Management ...
>> Spool Management ...
>> Information Security Officer Menu ...
>> Taskman Management ...
>> User Management ...
>> Application Utilities ...
>> Capacity Planning ...
>> HL7 Main Menu ...
>>
>>
>> You have PENDING ALERTS
>> Enter "VA to jump to VIEW ALERTS option
>>
>> Select Systems Manager Menu Option: operations Management
>>
>>
>> System Status
>> Introductory text edit
>> CPU/Service/User/Device Stats
>> RJD Kill off a users' job
>> Alert Management ...
>> Alpha/Beta Test Option Usage Menu ...
>> Clean old Job Nodes in XUTL
>> Delete Old (>14 d) Alerts
>> Foundations Management
>> Kernel Management Menu ...
>> Post sign-in Text Edit
>> RPC Broker Management Menu ...
>> User Management Menu ...
>>
>>
>> You have PENDING ALERTS
>> Enter "VA to jump to VIEW ALERTS option
>>
>> Select Operations Management Option: rpc Broker Management Menu
>>
>>
>> RPC Listener Edit
>> Start All RPC Broker Listeners
>> Stop All RPC Broker Listeners
>> Clear XWB Log Files
>> Debug Parameter Edit
>> View XWB Log
>>
>>
>> You have PENDING ALERTS
>> Enter "VA to jump to VIEW ALERTS option
>>
>> Select RPC Broker Management Menu Option: debug Parameter Edit
>>
>>
>>
>> ----- Setting RPCBroker debug logging for System: FOIA.PLATINUM.VA.GOV-----
>> Enable Broker Logging: 3 very Verbose
>>
>>
>>
>>
>> RPC Listener Edit
>> Start All RPC Broker Listeners
>> Stop All RPC Broker Listeners
>> Clear XWB Log Files
>> Debug Parameter Edit
>> View XWB Log
>>
>>
>> You have PENDING ALERTS
>> Enter "VA to jump to VIEW ALERTS option
>>
>> Select RPC Broker Management Menu Option:
>>
>> --
>> Nancy Anthracite
>>
>> On Wednesday, February 22, 2012, Jignesh Patel wrote:
>> > Nancy,
>> > I see following;
>> >
>> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE (user-defined error
>> > trap)
>> > At M source location BREAD+15^XWBRW
>> > Wed Feb 22 05:29:38 GMT 2012
>> > LANG=en_US.UTF-8
>> > LC_CTYPE="en_US.UTF-8"
>> > LC_NUMERIC="en_US.UTF-8"
>> > LC_TIME="en_US.UTF-8"
>> > LC_COLLATE="en_US.UTF-8"
>> > LC_MONETARY="en_US.UTF-8"
>> > LC_MESSAGES="en_US.UTF-8"
>> > LC_PAPER="en_US.UTF-8"
>> > LC_NAME="en_US.UTF-8"
>> > LC_ADDRESS="en_US.UTF-8"
>> > LC_TELEPHONE="en_US.UTF-8"
>> > LC_MEASUREMENT="en_US.UTF-8"
>> > LC_IDENTIFICATION="en_US.UTF-8"
>> > LC_ALL=en_US.UTF-8
>> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE (user-defined error
>> > trap)
>> > At M source location BREAD+15^XWBRW
>> > Wed Feb 22 05:29:43 GMT 2012
>> > LANG=en_US.UTF-8
>> > LC_CTYPE="en_US.UTF-8"
>> > LC_NUMERIC="en_US.UTF-8"
>> > LC_TIME="en_US.UTF-8"
>> > LC_COLLATE="en_US.UTF-8"
>> > LC_MONETARY="en_US.UTF-8"
>> > LC_MESSAGES="en_US.UTF-8"
>> > LC_PAPER="en_US.UTF-8"
>> > LC_NAME="en_US.UTF-8"
>> > LC_ADDRESS="en_US.UTF-8"
>> > LC_TELEPHONE="en_US.UTF-8"
>> > LC_MEASUREMENT="en_US.UTF-8"
>> > LC_IDENTIFICATION="en_US.UTF-8"
>> > LC_ALL=en_US.UTF-8
>> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE (user-defined error
>> > trap)
>> > At M source location BREAD+15^XWBRW
>> >
>> > On Tue, Feb 21, 2012 at 10:36 PM, Nancy Anthracite <
>> >
>> > nanthracite@earthlink.net> wrote:
>> > > If that 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log is actually on
>> > > the same line as the line above it in the email, what are you seeing
>> in
>> > > /home/ecloud/Downloads/VistA/log/EHR-gui.log?
>> > >
>> > > --
>> > > Nancy Anthracite
>> > >
>> > > On Tuesday, February 21, 2012, you wrote:
>> > > > Nancy,
>> > > >
>> > > > Here you go. The locale information is being placed into the
>> EHR-gui to
>> > > > make sure it should be taken as somehow GT.M was ignoring UTF-8
>> > >
>> > >
>> -------------------------------------------------------------------------
>> > > --
>> > >
>> > > > --------------------------------------- #!/bin/bash
>> > > > #EHR-gui: This is a file to run RPCBroker as a Linux service
>> > > > #make sure of our directory
>> > > > cd /home/ecloud/Downloads/VistA
>> > > > date >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
>> > > > #Get the GTM profile
>> > > > source /etc/profile.d/gtmprofile.sh
>> > > > #set locale
>> > > > export LANG=en_US.UTF-8
>> > > > export LC_CTYPE=en_US.UTF-8
>> > > > export LC_NUMERIC="en_US.UTF-8"
>> > > > export LC_TIME="en_US.UTF-8"
>> > > > export LC_COLLATE="en_US.UTF-8"
>> > > > export LC_MONETARY="en_US.UTF-8"
>> > > > export LC_MESSAGES="en_US.UTF-8"
>> > > > export LC_PAPER="en_US.UTF-8"
>> > > > export LC_NAME="en_US.UTF-8"
>> > > > export LC_ADDRESS="en_US.UTF-8"
>> > > > export LC_TELEPHONE="en_US.UTF-8"
>> > > > export LC_MEASUREMENT="en_US.UTF-8"
>> > > > export LC_IDENTIFICATION="en_US.UTF-8"
>> > > > export LC_ALL=en_US.UTF-8
>> > > > locale >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
>> > > > #Run routine
>> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
>> > > > 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log
>> > >
>> > >
>> -------------------------------------------------------------------------
>> > > --
>> > >
>> > > > ----------------------------------
>> > > >
>> > > > When I run from command line
>> > > >
>> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
>> > > > %GTM-E-SETECODE, Non-empty value assigned to $ECODE (user-defined
>> error
>> > > > trap)
>> > > > At M source location BREAD+15^XWBRW
>> > > >
>> > > > UTF8>
>> > > >
>> > > >
>> > > >
>> > > >
>> > > > -Jignesh
>> > > >
>> > > > On Tue, Feb 21, 2012 at 7:33 PM, Nancy Anthracite
>> > > > <nanthracite@earthlink.net
>> > > >
>> > > > > wrote:
>> > > > >
>> > > > > Now show me the contents of the file
>> > >
>> > > /home/ecloud/Downloads/VistA/EHR-gui
>> > >
>> > > > > --
>> > > > > Nancy Anthracite
>> > > > >
>> > > > > On Tuesday, February 21, 2012, Jignesh Patel wrote:
>> > > > > > Nancy are you talking about this file.
>> > > > > > [ecloud@s1-iCare-VistA1 xinetd.d]$ cat EHR-gui
>> > > > > > service EHR-gui
>> > > > > >
>> > > > > > {
>> > > > > > port = 9230
>> > > > > > socket_type = stream
>> > > > > > protocol = tcp
>> > > > > > user = ecloud
>> > > > > > server = /home/ecloud/Downloads/VistA/EHR-gui
>> > > > > > type = UNLISTED
>> > > > > > wait = no
>> > > > > > disable = no
>> > > > > > }
>> > > > > >
>> > > > > > On Mon, Feb 20, 2012 at 5:37 PM, Nancy Anthracite
>> > > > > > <nanthracite@earthlink.net
>> > > > > >
>> > > > > > > wrote:
>> > > > > > >
>> > > > > > > Look at the log file for the xinetd connection which is
>> probably
>> > > > >
>> > > > > defined
>> > > > >
>> > > > > > > in the "server" code in the xinetd connection file in
>> > >
>> > > /etc/xinetd.d/
>> > >
>> > > > > > > --
>> > > > > > > Nancy Anthracite
>> > > > > > >
>> > > > > > > On Monday, February 20, 2012, Jignesh Patel wrote:
>> > > > > > > > While running Xinetd on FOIA-VistA on gtm we got following
>> > > > > > > > error.
>> > > > > > > >
>> > > > > > > > "Non-empty value assigned to $ECODE (user-defined error
>> trap)
>> > > > > > > > At
>> > >
>> > > M
>> > >
>> > > > > > > > source location BREAD+15^XWBRW"
>> > > > > > > >
>> > > > > > > >
>> > > > > > > > Does anybody encounter the same error?
>> > > > > > > >
>> > > > > > > >
>> > > > > > > > -Jignesh
>>
>>
>

like0

error while executing CPRS

Nancy Anthracite's picture

That log is usually a pretty verbose log and you are apparently not even
getting much past square one. It has very little to say. Did you pick the
very verbose option, #3?

Do be sure you have a null device set up correctly as that is a common reason
for a crash and burn, but it usually gives a a different error.
--
Nancy Anthracite

On Wednesday, February 22, 2012, Jignesh Patel wrote:
> I see following in the log
>
> Log from Job 30930 2 Lines
> 15:57:38 = Log start: Feb 22, 2012@15:57:38
> 15:57:38 = XWBTCPM
>
> Log from Job 31002 2 Lines
> 15:57:48 = Log start: Feb 22, 2012@15:57:48
> 15:57:48 = XWBTCPM
>
> Log from Job 31038 2 Lines
> 15:57:53 = Log start: Feb 22, 2012@15:57:53
> 15:57:53 = XWBTCPM
>
> On Wed, Feb 22, 2012 at 10:55 AM, Jignesh Patel
<jigneshmpatel@gmail.com>wrote:
> > Nancy.
> > Sorry I slept let yesterday. I have implemented the step you did
> > mention.I have enabled RPC broker debug.
> >
> > Now what I need to do?
> >
> >
> > On Wed, Feb 22, 2012 at 6:55 AM, Nancy Anthracite <
> >
> > nanthracite@earthlink.net> wrote:
> >> Well, I understand there is a bug in the code so the error trap does not
> >> work
> >> right so it is hard to know.
> >>
> >> I have done a port of the FOIA from 12-6-11 and CPRS is connecting OK so
> >> I don't know what to say until the error trap is working, and then it
> >> will probably take someone else to say.
> >>
> >> But, we might glean something from the debugger for the broker.
> >>
> >> Do the following and then try to connect and see what you get in the log
> >> when
> >> you run the View XWB Log option.
> >>
> >>
> >>
> >> GTM>S DUZ=1 D ^XUP
> >>
> >> Setting up programmer environment
> >> This is a TEST account.
> >>
> >> Terminal Type set to: C-VT220
> >>
> >> Select OPTION NAME: eve
> >>
> >> 1 EVE Systems Manager Menu
> >> 2 EVENT CAPTURE ECX ECS MAINTENANCE Event Capture
> >> 3 EVENT CAPTURE (ECS) EXTRACT AU ECX ECS SOURCE AUDIT Event
> >>
> >> Capture
> >> (ECS) Extract Audit
> >>
> >> 4 EVENT CAPTURE DATA ENTRY ECENTER Event Capture Data Entry
> >> 5 EVENT CAPTURE EXTRACT ECXEC Event Capture Extract
> >>
> >> Press <RETURN> to see more, '^' to exit this list, OR
> >> CHOOSE 1-5: 1 EVE Systems Manager Menu
> >>
> >> Core Applications ...
> >> Device Management ...
> >> Menu Management ...
> >> Programmer Options ...
> >> Operations Management ...
> >> Spool Management ...
> >> Information Security Officer Menu ...
> >> Taskman Management ...
> >> User Management ...
> >> Application Utilities ...
> >> Capacity Planning ...
> >> HL7 Main Menu ...
> >>
> >> You have PENDING ALERTS
> >>
> >> Enter "VA to jump to VIEW ALERTS option
> >>
> >> Select Systems Manager Menu Option: operations Management
> >>
> >> System Status
> >> Introductory text edit
> >> CPU/Service/User/Device Stats
> >>
> >> RJD Kill off a users' job
> >>
> >> Alert Management ...
> >> Alpha/Beta Test Option Usage Menu ...
> >> Clean old Job Nodes in XUTL
> >> Delete Old (>14 d) Alerts
> >> Foundations Management
> >> Kernel Management Menu ...
> >> Post sign-in Text Edit
> >> RPC Broker Management Menu ...
> >> User Management Menu ...
> >>
> >> You have PENDING ALERTS
> >>
> >> Enter "VA to jump to VIEW ALERTS option
> >>
> >> Select Operations Management Option: rpc Broker Management Menu
> >>
> >> RPC Listener Edit
> >> Start All RPC Broker Listeners
> >> Stop All RPC Broker Listeners
> >> Clear XWB Log Files
> >> Debug Parameter Edit
> >> View XWB Log
> >>
> >> You have PENDING ALERTS
> >>
> >> Enter "VA to jump to VIEW ALERTS option
> >>
> >> Select RPC Broker Management Menu Option: debug Parameter Edit
> >>
> >>
> >>
> >> ----- Setting RPCBroker debug logging for System:
> >> FOIA.PLATINUM.VA.GOV----- Enable Broker Logging: 3 very Verbose
> >>
> >> RPC Listener Edit
> >> Start All RPC Broker Listeners
> >> Stop All RPC Broker Listeners
> >> Clear XWB Log Files
> >> Debug Parameter Edit
> >> View XWB Log
> >>
> >> You have PENDING ALERTS
> >>
> >> Enter "VA to jump to VIEW ALERTS option
> >>
> >> Select RPC Broker Management Menu Option:
> >>
> >> --
> >> Nancy Anthracite
> >>
> >> On Wednesday, February 22, 2012, Jignesh Patel wrote:
> >> > Nancy,
> >> > I see following;
> >> >
> >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE (user-defined
> >> > error trap)
> >> > At M source location BREAD+15^XWBRW
> >> > Wed Feb 22 05:29:38 GMT 2012
> >> > LANG=en_US.UTF-8
> >> > LC_CTYPE="en_US.UTF-8"
> >> > LC_NUMERIC="en_US.UTF-8"
> >> > LC_TIME="en_US.UTF-8"
> >> > LC_COLLATE="en_US.UTF-8"
> >> > LC_MONETARY="en_US.UTF-8"
> >> > LC_MESSAGES="en_US.UTF-8"
> >> > LC_PAPER="en_US.UTF-8"
> >> > LC_NAME="en_US.UTF-8"
> >> > LC_ADDRESS="en_US.UTF-8"
> >> > LC_TELEPHONE="en_US.UTF-8"
> >> > LC_MEASUREMENT="en_US.UTF-8"
> >> > LC_IDENTIFICATION="en_US.UTF-8"
> >> > LC_ALL=en_US.UTF-8
> >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE (user-defined
> >> > error trap)
> >> > At M source location BREAD+15^XWBRW
> >> > Wed Feb 22 05:29:43 GMT 2012
> >> > LANG=en_US.UTF-8
> >> > LC_CTYPE="en_US.UTF-8"
> >> > LC_NUMERIC="en_US.UTF-8"
> >> > LC_TIME="en_US.UTF-8"
> >> > LC_COLLATE="en_US.UTF-8"
> >> > LC_MONETARY="en_US.UTF-8"
> >> > LC_MESSAGES="en_US.UTF-8"
> >> > LC_PAPER="en_US.UTF-8"
> >> > LC_NAME="en_US.UTF-8"
> >> > LC_ADDRESS="en_US.UTF-8"
> >> > LC_TELEPHONE="en_US.UTF-8"
> >> > LC_MEASUREMENT="en_US.UTF-8"
> >> > LC_IDENTIFICATION="en_US.UTF-8"
> >> > LC_ALL=en_US.UTF-8
> >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE (user-defined
> >> > error trap)
> >> > At M source location BREAD+15^XWBRW
> >> >
> >> > On Tue, Feb 21, 2012 at 10:36 PM, Nancy Anthracite <
> >> >
> >> > nanthracite@earthlink.net> wrote:
> >> > > If that 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log is actually
> >> > > on the same line as the line above it in the email, what are you
> >> > > seeing
> >>
> >> in
> >>
> >> > > /home/ecloud/Downloads/VistA/log/EHR-gui.log?
> >> > >
> >> > > --
> >> > > Nancy Anthracite
> >> > >
> >> > > On Tuesday, February 21, 2012, you wrote:
> >> > > > Nancy,
> >> > > >
> >> > > > Here you go. The locale information is being placed into the
> >>
> >> EHR-gui to
> >>
> >> > > > make sure it should be taken as somehow GT.M was ignoring UTF-8
> >>
> >> ------------------------------------------------------------------------
> >> -
> >>
> >> > > --
> >> > >
> >> > > > --------------------------------------- #!/bin/bash
> >> > > > #EHR-gui: This is a file to run RPCBroker as a Linux service
> >> > > > #make sure of our directory
> >> > > > cd /home/ecloud/Downloads/VistA
> >> > > > date >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
> >> > > > #Get the GTM profile
> >> > > > source /etc/profile.d/gtmprofile.sh
> >> > > > #set locale
> >> > > > export LANG=en_US.UTF-8
> >> > > > export LC_CTYPE=en_US.UTF-8
> >> > > > export LC_NUMERIC="en_US.UTF-8"
> >> > > > export LC_TIME="en_US.UTF-8"
> >> > > > export LC_COLLATE="en_US.UTF-8"
> >> > > > export LC_MONETARY="en_US.UTF-8"
> >> > > > export LC_MESSAGES="en_US.UTF-8"
> >> > > > export LC_PAPER="en_US.UTF-8"
> >> > > > export LC_NAME="en_US.UTF-8"
> >> > > > export LC_ADDRESS="en_US.UTF-8"
> >> > > > export LC_TELEPHONE="en_US.UTF-8"
> >> > > > export LC_MEASUREMENT="en_US.UTF-8"
> >> > > > export LC_IDENTIFICATION="en_US.UTF-8"
> >> > > > export LC_ALL=en_US.UTF-8
> >> > > > locale >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
> >> > > > #Run routine
> >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
> >> > > > 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log
> >>
> >> ------------------------------------------------------------------------
> >> -
> >>
> >> > > --
> >> > >
> >> > > > ----------------------------------
> >> > > >
> >> > > > When I run from command line
> >> > > >
> >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
> >> > > > %GTM-E-SETECODE, Non-empty value assigned to $ECODE (user-defined
> >>
> >> error
> >>
> >> > > > trap)
> >> > > > At M source location BREAD+15^XWBRW
> >> > > >
> >> > > > UTF8>
> >> > > >
> >> > > >
> >> > > >
> >> > > >
> >> > > > -Jignesh
> >> > > >
> >> > > > On Tue, Feb 21, 2012 at 7:33 PM, Nancy Anthracite
> >> > > > <nanthracite@earthlink.net
> >> > > >
> >> > > > > wrote:
> >> > > > >
> >> > > > > Now show me the contents of the file
> >> > >
> >> > > /home/ecloud/Downloads/VistA/EHR-gui
> >> > >
> >> > > > > --
> >> > > > > Nancy Anthracite
> >> > > > >
> >> > > > > On Tuesday, February 21, 2012, Jignesh Patel wrote:
> >> > > > > > Nancy are you talking about this file.
> >> > > > > > [ecloud@s1-iCare-VistA1 xinetd.d]$ cat EHR-gui
> >> > > > > > service EHR-gui
> >> > > > > >
> >> > > > > > {
> >> > > > > > port = 9230
> >> > > > > > socket_type = stream
> >> > > > > > protocol = tcp
> >> > > > > > user = ecloud
> >> > > > > > server = /home/ecloud/Downloads/VistA/EHR-gui
> >> > > > > > type = UNLISTED
> >> > > > > > wait = no
> >> > > > > > disable = no
> >> > > > > > }
> >> > > > > >
> >> > > > > > On Mon, Feb 20, 2012 at 5:37 PM, Nancy Anthracite
> >> > > > > > <nanthracite@earthlink.net
> >> > > > > >
> >> > > > > > > wrote:
> >> > > > > > >
> >> > > > > > > Look at the log file for the xinetd connection which is
> >>
> >> probably
> >>
> >> > > > > defined
> >> > > > >
> >> > > > > > > in the "server" code in the xinetd connection file in
> >> > >
> >> > > /etc/xinetd.d/
> >> > >
> >> > > > > > > --
> >> > > > > > > Nancy Anthracite
> >> > > > > > >
> >> > > > > > > On Monday, February 20, 2012, Jignesh Patel wrote:
> >> > > > > > > > While running Xinetd on FOIA-VistA on gtm we got following
> >> > > > > > > > error.
> >> > > > > > > >
> >> > > > > > > > "Non-empty value assigned to $ECODE (user-defined error
> >>
> >> trap)
> >>
> >> > > > > > > > At
> >> > >
> >> > > M
> >> > >
> >> > > > > > > > source location BREAD+15^XWBRW"
> >> > > > > > > >
> >> > > > > > > >
> >> > > > > > > > Does anybody encounter the same error?
> >> > > > > > > >
> >> > > > > > > >
> >> > > > > > > > -Jignesh

like0

error while executing CPRS

Jignesh Patel's picture

May be because I don't have task man running. See below:

I tried to check TASKMAN and found
Operating System: GT.M (Unix)
Volume Set: ROU
Cpu-volume Pair: ROU:s1-iCare-VistA1
TaskMan Files UCI and Volume Set: ,ROU

Seems there is no UCI setup. Is that a problem?

And My task man is not running
hecking Taskman. Current $H=62509,59871 (Feb 22, 2012@16:37:51)
RUN NODE=<Undefined>
Taskman is shutting down not running..
Checking the Status List:
Node weight status time $J
The Status List is empty.

Checking the Schedule List:
Taskman has no tasks scheduled.

Checking the IO Lists: Last TM scan: 172947 sec,
There are no tasks waiting for devices.

Checking the Job List:
There are no tasks waiting for partitions.

Checking the Task List:
There are no tasks currently running.
Checking Sub-Managers:
On node FOI:FOIISCSVR there are no free Sub-Manager(s). Status: Stop
On node ROU:s1-iCare-VistA1 there are no free Sub-Manager(s). Status:
Stop

On Wed, Feb 22, 2012 at 11:29 AM, Nancy Anthracite <
nanthracite@earthlink.net> wrote:

> That log is usually a pretty verbose log and you are apparently not even
> getting much past square one. It has very little to say. Did you pick the
> very verbose option, #3?
>
> Do be sure you have a null device set up correctly as that is a common
> reason
> for a crash and burn, but it usually gives a a different error.
> --
> Nancy Anthracite
>
> On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > I see following in the log
> >
> > Log from Job 30930 2 Lines
> > 15:57:38 = Log start: Feb 22, 2012@15:57:38
> > 15:57:38 = XWBTCPM
> >
> > Log from Job 31002 2 Lines
> > 15:57:48 = Log start: Feb 22, 2012@15:57:48
> > 15:57:48 = XWBTCPM
> >
> > Log from Job 31038 2 Lines
> > 15:57:53 = Log start: Feb 22, 2012@15:57:53
> > 15:57:53 = XWBTCPM
> >
> > On Wed, Feb 22, 2012 at 10:55 AM, Jignesh Patel
> <jigneshmpatel@gmail.com>wrote:
> > > Nancy.
> > > Sorry I slept let yesterday. I have implemented the step you did
> > > mention.I have enabled RPC broker debug.
> > >
> > > Now what I need to do?
> > >
> > >
> > > On Wed, Feb 22, 2012 at 6:55 AM, Nancy Anthracite <
> > >
> > > nanthracite@earthlink.net> wrote:
> > >> Well, I understand there is a bug in the code so the error trap does
> not
> > >> work
> > >> right so it is hard to know.
> > >>
> > >> I have done a port of the FOIA from 12-6-11 and CPRS is connecting OK
> so
> > >> I don't know what to say until the error trap is working, and then it
> > >> will probably take someone else to say.
> > >>
> > >> But, we might glean something from the debugger for the broker.
> > >>
> > >> Do the following and then try to connect and see what you get in the
> log
> > >> when
> > >> you run the View XWB Log option.
> > >>
> > >>
> > >>
> > >> GTM>S DUZ=1 D ^XUP
> > >>
> > >> Setting up programmer environment
> > >> This is a TEST account.
> > >>
> > >> Terminal Type set to: C-VT220
> > >>
> > >> Select OPTION NAME: eve
> > >>
> > >> 1 EVE Systems Manager Menu
> > >> 2 EVENT CAPTURE ECX ECS MAINTENANCE Event Capture
> > >> 3 EVENT CAPTURE (ECS) EXTRACT AU ECX ECS SOURCE AUDIT Event
> > >>
> > >> Capture
> > >> (ECS) Extract Audit
> > >>
> > >> 4 EVENT CAPTURE DATA ENTRY ECENTER Event Capture Data Entry
> > >> 5 EVENT CAPTURE EXTRACT ECXEC Event Capture Extract
> > >>
> > >> Press <RETURN> to see more, '^' to exit this list, OR
> > >> CHOOSE 1-5: 1 EVE Systems Manager Menu
> > >>
> > >> Core Applications ...
> > >> Device Management ...
> > >> Menu Management ...
> > >> Programmer Options ...
> > >> Operations Management ...
> > >> Spool Management ...
> > >> Information Security Officer Menu ...
> > >> Taskman Management ...
> > >> User Management ...
> > >> Application Utilities ...
> > >> Capacity Planning ...
> > >> HL7 Main Menu ...
> > >>
> > >> You have PENDING ALERTS
> > >>
> > >> Enter "VA to jump to VIEW ALERTS option
> > >>
> > >> Select Systems Manager Menu Option: operations Management
> > >>
> > >> System Status
> > >> Introductory text edit
> > >> CPU/Service/User/Device Stats
> > >>
> > >> RJD Kill off a users' job
> > >>
> > >> Alert Management ...
> > >> Alpha/Beta Test Option Usage Menu ...
> > >> Clean old Job Nodes in XUTL
> > >> Delete Old (>14 d) Alerts
> > >> Foundations Management
> > >> Kernel Management Menu ...
> > >> Post sign-in Text Edit
> > >> RPC Broker Management Menu ...
> > >> User Management Menu ...
> > >>
> > >> You have PENDING ALERTS
> > >>
> > >> Enter "VA to jump to VIEW ALERTS option
> > >>
> > >> Select Operations Management Option: rpc Broker Management Menu
> > >>
> > >> RPC Listener Edit
> > >> Start All RPC Broker Listeners
> > >> Stop All RPC Broker Listeners
> > >> Clear XWB Log Files
> > >> Debug Parameter Edit
> > >> View XWB Log
> > >>
> > >> You have PENDING ALERTS
> > >>
> > >> Enter "VA to jump to VIEW ALERTS option
> > >>
> > >> Select RPC Broker Management Menu Option: debug Parameter Edit
> > >>
> > >>
> > >>
> > >> ----- Setting RPCBroker debug logging for System:
> > >> FOIA.PLATINUM.VA.GOV----- Enable Broker Logging: 3 very Verbose
> > >>
> > >> RPC Listener Edit
> > >> Start All RPC Broker Listeners
> > >> Stop All RPC Broker Listeners
> > >> Clear XWB Log Files
> > >> Debug Parameter Edit
> > >> View XWB Log
> > >>
> > >> You have PENDING ALERTS
> > >>
> > >> Enter "VA to jump to VIEW ALERTS option
> > >>
> > >> Select RPC Broker Management Menu Option:
> > >>
> > >> --
> > >> Nancy Anthracite
> > >>
> > >> On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > >> > Nancy,
> > >> > I see following;
> > >> >
> > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE (user-defined
> > >> > error trap)
> > >> > At M source location BREAD+15^XWBRW
> > >> > Wed Feb 22 05:29:38 GMT 2012
> > >> > LANG=en_US.UTF-8
> > >> > LC_CTYPE="en_US.UTF-8"
> > >> > LC_NUMERIC="en_US.UTF-8"
> > >> > LC_TIME="en_US.UTF-8"
> > >> > LC_COLLATE="en_US.UTF-8"
> > >> > LC_MONETARY="en_US.UTF-8"
> > >> > LC_MESSAGES="en_US.UTF-8"
> > >> > LC_PAPER="en_US.UTF-8"
> > >> > LC_NAME="en_US.UTF-8"
> > >> > LC_ADDRESS="en_US.UTF-8"
> > >> > LC_TELEPHONE="en_US.UTF-8"
> > >> > LC_MEASUREMENT="en_US.UTF-8"
> > >> > LC_IDENTIFICATION="en_US.UTF-8"
> > >> > LC_ALL=en_US.UTF-8
> > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE (user-defined
> > >> > error trap)
> > >> > At M source location BREAD+15^XWBRW
> > >> > Wed Feb 22 05:29:43 GMT 2012
> > >> > LANG=en_US.UTF-8
> > >> > LC_CTYPE="en_US.UTF-8"
> > >> > LC_NUMERIC="en_US.UTF-8"
> > >> > LC_TIME="en_US.UTF-8"
> > >> > LC_COLLATE="en_US.UTF-8"
> > >> > LC_MONETARY="en_US.UTF-8"
> > >> > LC_MESSAGES="en_US.UTF-8"
> > >> > LC_PAPER="en_US.UTF-8"
> > >> > LC_NAME="en_US.UTF-8"
> > >> > LC_ADDRESS="en_US.UTF-8"
> > >> > LC_TELEPHONE="en_US.UTF-8"
> > >> > LC_MEASUREMENT="en_US.UTF-8"
> > >> > LC_IDENTIFICATION="en_US.UTF-8"
> > >> > LC_ALL=en_US.UTF-8
> > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE (user-defined
> > >> > error trap)
> > >> > At M source location BREAD+15^XWBRW
> > >> >
> > >> > On Tue, Feb 21, 2012 at 10:36 PM, Nancy Anthracite <
> > >> >
> > >> > nanthracite@earthlink.net> wrote:
> > >> > > If that 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log is
> actually
> > >> > > on the same line as the line above it in the email, what are you
> > >> > > seeing
> > >>
> > >> in
> > >>
> > >> > > /home/ecloud/Downloads/VistA/log/EHR-gui.log?
> > >> > >
> > >> > > --
> > >> > > Nancy Anthracite
> > >> > >
> > >> > > On Tuesday, February 21, 2012, you wrote:
> > >> > > > Nancy,
> > >> > > >
> > >> > > > Here you go. The locale information is being placed into the
> > >>
> > >> EHR-gui to
> > >>
> > >> > > > make sure it should be taken as somehow GT.M was ignoring UTF-8
> > >>
> > >>
> ------------------------------------------------------------------------
> > >> -
> > >>
> > >> > > --
> > >> > >
> > >> > > > --------------------------------------- #!/bin/bash
> > >> > > > #EHR-gui: This is a file to run RPCBroker as a Linux service
> > >> > > > #make sure of our directory
> > >> > > > cd /home/ecloud/Downloads/VistA
> > >> > > > date >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
> > >> > > > #Get the GTM profile
> > >> > > > source /etc/profile.d/gtmprofile.sh
> > >> > > > #set locale
> > >> > > > export LANG=en_US.UTF-8
> > >> > > > export LC_CTYPE=en_US.UTF-8
> > >> > > > export LC_NUMERIC="en_US.UTF-8"
> > >> > > > export LC_TIME="en_US.UTF-8"
> > >> > > > export LC_COLLATE="en_US.UTF-8"
> > >> > > > export LC_MONETARY="en_US.UTF-8"
> > >> > > > export LC_MESSAGES="en_US.UTF-8"
> > >> > > > export LC_PAPER="en_US.UTF-8"
> > >> > > > export LC_NAME="en_US.UTF-8"
> > >> > > > export LC_ADDRESS="en_US.UTF-8"
> > >> > > > export LC_TELEPHONE="en_US.UTF-8"
> > >> > > > export LC_MEASUREMENT="en_US.UTF-8"
> > >> > > > export LC_IDENTIFICATION="en_US.UTF-8"
> > >> > > > export LC_ALL=en_US.UTF-8
> > >> > > > locale >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
> > >> > > > #Run routine
> > >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
> > >> > > > 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log
> > >>
> > >>
> ------------------------------------------------------------------------
> > >> -
> > >>
> > >> > > --
> > >> > >
> > >> > > > ----------------------------------
> > >> > > >
> > >> > > > When I run from command line
> > >> > > >
> > >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
> > >> > > > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> (user-defined
> > >>
> > >> error
> > >>
> > >> > > > trap)
> > >> > > > At M source location BREAD+15^XWBRW
> > >> > > >
> > >> > > > UTF8>
> > >> > > >
> > >> > > >
> > >> > > >
> > >> > > >
> > >> > > > -Jignesh
> > >> > > >
> > >> > > > On Tue, Feb 21, 2012 at 7:33 PM, Nancy Anthracite
> > >> > > > <nanthracite@earthlink.net
> > >> > > >
> > >> > > > > wrote:
> > >> > > > >
> > >> > > > > Now show me the contents of the file
> > >> > >
> > >> > > /home/ecloud/Downloads/VistA/EHR-gui
> > >> > >
> > >> > > > > --
> > >> > > > > Nancy Anthracite
> > >> > > > >
> > >> > > > > On Tuesday, February 21, 2012, Jignesh Patel wrote:
> > >> > > > > > Nancy are you talking about this file.
> > >> > > > > > [ecloud@s1-iCare-VistA1 xinetd.d]$ cat EHR-gui
> > >> > > > > > service EHR-gui
> > >> > > > > >
> > >> > > > > > {
> > >> > > > > > port = 9230
> > >> > > > > > socket_type = stream
> > >> > > > > > protocol = tcp
> > >> > > > > > user = ecloud
> > >> > > > > > server = /home/ecloud/Downloads/VistA/EHR-gui
> > >> > > > > > type = UNLISTED
> > >> > > > > > wait = no
> > >> > > > > > disable = no
> > >> > > > > > }
> > >> > > > > >
> > >> > > > > > On Mon, Feb 20, 2012 at 5:37 PM, Nancy Anthracite
> > >> > > > > > <nanthracite@earthlink.net
> > >> > > > > >
> > >> > > > > > > wrote:
> > >> > > > > > >
> > >> > > > > > > Look at the log file for the xinetd connection which is
> > >>
> > >> probably
> > >>
> > >> > > > > defined
> > >> > > > >
> > >> > > > > > > in the "server" code in the xinetd connection file in
> > >> > >
> > >> > > /etc/xinetd.d/
> > >> > >
> > >> > > > > > > --
> > >> > > > > > > Nancy Anthracite
> > >> > > > > > >
> > >> > > > > > > On Monday, February 20, 2012, Jignesh Patel wrote:
> > >> > > > > > > > While running Xinetd on FOIA-VistA on gtm we got
> following
> > >> > > > > > > > error.
> > >> > > > > > > >
> > >> > > > > > > > "Non-empty value assigned to $ECODE (user-defined error
> > >>
> > >> trap)
> > >>
> > >> > > > > > > > At
> > >> > >
> > >> > > M
> > >> > >
> > >> > > > > > > > source location BREAD+15^XWBRW"
> > >> > > > > > > >
> > >> > > > > > > >
> > >> > > > > > > > Does anybody encounter the same error?
> > >> > > > > > > >
> > >> > > > > > > >
> > >> > > > > > > > -Jignesh
>
>

like0

error while executing CPRS

Jignesh Patel's picture

I have restarted taskman

And also checked RPC DEBUG parameter

----- Setting RPCBroker debug logging for System: FOIA.PLATINUM.VA.GOV-----
Enable Broker Logging: very Verbose//

But the log files shows me only

Log from Job 14021 2 Lines
16:33:14 = Log start: Feb 22, 2012@16:33:14
16:33:14 = XWBTCPM
Return to continue, Next log, Exit: Continue//

On Wed, Feb 22, 2012 at 11:39 AM, Jignesh Patel <jigneshmpatel@gmail.com>wrote:

> May be because I don't have task man running. See below:
>
> I tried to check TASKMAN and found
> Operating System: GT.M (Unix)
> Volume Set: ROU
> Cpu-volume Pair: ROU:s1-iCare-VistA1
> TaskMan Files UCI and Volume Set: ,ROU
>
> Seems there is no UCI setup. Is that a problem?
>
>
> And My task man is not running
> hecking Taskman. Current $H=62509,59871 (Feb 22, 2012@16:37:51)
> RUN NODE=<Undefined>
> Taskman is shutting down not running..
> Checking the Status List:
> Node weight status time $J
> The Status List is empty.
>
> Checking the Schedule List:
> Taskman has no tasks scheduled.
>
> Checking the IO Lists: Last TM scan: 172947 sec,
> There are no tasks waiting for devices.
>
> Checking the Job List:
> There are no tasks waiting for partitions.
>
> Checking the Task List:
> There are no tasks currently running.
> Checking Sub-Managers:
> On node FOI:FOIISCSVR there are no free Sub-Manager(s). Status: Stop
> On node ROU:s1-iCare-VistA1 there are no free Sub-Manager(s). Status:
> Stop
>
> On Wed, Feb 22, 2012 at 11:29 AM, Nancy Anthracite <
> nanthracite@earthlink.net> wrote:
>
>> That log is usually a pretty verbose log and you are apparently not even
>> getting much past square one. It has very little to say. Did you pick the
>> very verbose option, #3?
>>
>> Do be sure you have a null device set up correctly as that is a common
>> reason
>> for a crash and burn, but it usually gives a a different error.
>> --
>> Nancy Anthracite
>>
>> On Wednesday, February 22, 2012, Jignesh Patel wrote:
>> > I see following in the log
>> >
>> > Log from Job 30930 2 Lines
>> > 15:57:38 = Log start: Feb 22, 2012@15:57:38
>> > 15:57:38 = XWBTCPM
>> >
>> > Log from Job 31002 2 Lines
>> > 15:57:48 = Log start: Feb 22, 2012@15:57:48
>> > 15:57:48 = XWBTCPM
>> >
>> > Log from Job 31038 2 Lines
>> > 15:57:53 = Log start: Feb 22, 2012@15:57:53
>> > 15:57:53 = XWBTCPM
>> >
>> > On Wed, Feb 22, 2012 at 10:55 AM, Jignesh Patel
>> <jigneshmpatel@gmail.com>wrote:
>> > > Nancy.
>> > > Sorry I slept let yesterday. I have implemented the step you did
>> > > mention.I have enabled RPC broker debug.
>> > >
>> > > Now what I need to do?
>> > >
>> > >
>> > > On Wed, Feb 22, 2012 at 6:55 AM, Nancy Anthracite <
>> > >
>> > > nanthracite@earthlink.net> wrote:
>> > >> Well, I understand there is a bug in the code so the error trap does
>> not
>> > >> work
>> > >> right so it is hard to know.
>> > >>
>> > >> I have done a port of the FOIA from 12-6-11 and CPRS is connecting
>> OK so
>> > >> I don't know what to say until the error trap is working, and then it
>> > >> will probably take someone else to say.
>> > >>
>> > >> But, we might glean something from the debugger for the broker.
>> > >>
>> > >> Do the following and then try to connect and see what you get in the
>> log
>> > >> when
>> > >> you run the View XWB Log option.
>> > >>
>> > >>
>> > >>
>> > >> GTM>S DUZ=1 D ^XUP
>> > >>
>> > >> Setting up programmer environment
>> > >> This is a TEST account.
>> > >>
>> > >> Terminal Type set to: C-VT220
>> > >>
>> > >> Select OPTION NAME: eve
>> > >>
>> > >> 1 EVE Systems Manager Menu
>> > >> 2 EVENT CAPTURE ECX ECS MAINTENANCE Event Capture
>> > >> 3 EVENT CAPTURE (ECS) EXTRACT AU ECX ECS SOURCE AUDIT
>> Event
>> > >>
>> > >> Capture
>> > >> (ECS) Extract Audit
>> > >>
>> > >> 4 EVENT CAPTURE DATA ENTRY ECENTER Event Capture Data
>> Entry
>> > >> 5 EVENT CAPTURE EXTRACT ECXEC Event Capture Extract
>> > >>
>> > >> Press <RETURN> to see more, '^' to exit this list, OR
>> > >> CHOOSE 1-5: 1 EVE Systems Manager Menu
>> > >>
>> > >> Core Applications ...
>> > >> Device Management ...
>> > >> Menu Management ...
>> > >> Programmer Options ...
>> > >> Operations Management ...
>> > >> Spool Management ...
>> > >> Information Security Officer Menu ...
>> > >> Taskman Management ...
>> > >> User Management ...
>> > >> Application Utilities ...
>> > >> Capacity Planning ...
>> > >> HL7 Main Menu ...
>> > >>
>> > >> You have PENDING ALERTS
>> > >>
>> > >> Enter "VA to jump to VIEW ALERTS option
>> > >>
>> > >> Select Systems Manager Menu Option: operations Management
>> > >>
>> > >> System Status
>> > >> Introductory text edit
>> > >> CPU/Service/User/Device Stats
>> > >>
>> > >> RJD Kill off a users' job
>> > >>
>> > >> Alert Management ...
>> > >> Alpha/Beta Test Option Usage Menu ...
>> > >> Clean old Job Nodes in XUTL
>> > >> Delete Old (>14 d) Alerts
>> > >> Foundations Management
>> > >> Kernel Management Menu ...
>> > >> Post sign-in Text Edit
>> > >> RPC Broker Management Menu ...
>> > >> User Management Menu ...
>> > >>
>> > >> You have PENDING ALERTS
>> > >>
>> > >> Enter "VA to jump to VIEW ALERTS option
>> > >>
>> > >> Select Operations Management Option: rpc Broker Management Menu
>> > >>
>> > >> RPC Listener Edit
>> > >> Start All RPC Broker Listeners
>> > >> Stop All RPC Broker Listeners
>> > >> Clear XWB Log Files
>> > >> Debug Parameter Edit
>> > >> View XWB Log
>> > >>
>> > >> You have PENDING ALERTS
>> > >>
>> > >> Enter "VA to jump to VIEW ALERTS option
>> > >>
>> > >> Select RPC Broker Management Menu Option: debug Parameter Edit
>> > >>
>> > >>
>> > >>
>> > >> ----- Setting RPCBroker debug logging for System:
>> > >> FOIA.PLATINUM.VA.GOV----- Enable Broker Logging: 3 very Verbose
>> > >>
>> > >> RPC Listener Edit
>> > >> Start All RPC Broker Listeners
>> > >> Stop All RPC Broker Listeners
>> > >> Clear XWB Log Files
>> > >> Debug Parameter Edit
>> > >> View XWB Log
>> > >>
>> > >> You have PENDING ALERTS
>> > >>
>> > >> Enter "VA to jump to VIEW ALERTS option
>> > >>
>> > >> Select RPC Broker Management Menu Option:
>> > >>
>> > >> --
>> > >> Nancy Anthracite
>> > >>
>> > >> On Wednesday, February 22, 2012, Jignesh Patel wrote:
>> > >> > Nancy,
>> > >> > I see following;
>> > >> >
>> > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE (user-defined
>> > >> > error trap)
>> > >> > At M source location BREAD+15^XWBRW
>> > >> > Wed Feb 22 05:29:38 GMT 2012
>> > >> > LANG=en_US.UTF-8
>> > >> > LC_CTYPE="en_US.UTF-8"
>> > >> > LC_NUMERIC="en_US.UTF-8"
>> > >> > LC_TIME="en_US.UTF-8"
>> > >> > LC_COLLATE="en_US.UTF-8"
>> > >> > LC_MONETARY="en_US.UTF-8"
>> > >> > LC_MESSAGES="en_US.UTF-8"
>> > >> > LC_PAPER="en_US.UTF-8"
>> > >> > LC_NAME="en_US.UTF-8"
>> > >> > LC_ADDRESS="en_US.UTF-8"
>> > >> > LC_TELEPHONE="en_US.UTF-8"
>> > >> > LC_MEASUREMENT="en_US.UTF-8"
>> > >> > LC_IDENTIFICATION="en_US.UTF-8"
>> > >> > LC_ALL=en_US.UTF-8
>> > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE (user-defined
>> > >> > error trap)
>> > >> > At M source location BREAD+15^XWBRW
>> > >> > Wed Feb 22 05:29:43 GMT 2012
>> > >> > LANG=en_US.UTF-8
>> > >> > LC_CTYPE="en_US.UTF-8"
>> > >> > LC_NUMERIC="en_US.UTF-8"
>> > >> > LC_TIME="en_US.UTF-8"
>> > >> > LC_COLLATE="en_US.UTF-8"
>> > >> > LC_MONETARY="en_US.UTF-8"
>> > >> > LC_MESSAGES="en_US.UTF-8"
>> > >> > LC_PAPER="en_US.UTF-8"
>> > >> > LC_NAME="en_US.UTF-8"
>> > >> > LC_ADDRESS="en_US.UTF-8"
>> > >> > LC_TELEPHONE="en_US.UTF-8"
>> > >> > LC_MEASUREMENT="en_US.UTF-8"
>> > >> > LC_IDENTIFICATION="en_US.UTF-8"
>> > >> > LC_ALL=en_US.UTF-8
>> > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE (user-defined
>> > >> > error trap)
>> > >> > At M source location BREAD+15^XWBRW
>> > >> >
>> > >> > On Tue, Feb 21, 2012 at 10:36 PM, Nancy Anthracite <
>> > >> >
>> > >> > nanthracite@earthlink.net> wrote:
>> > >> > > If that 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log is
>> actually
>> > >> > > on the same line as the line above it in the email, what are you
>> > >> > > seeing
>> > >>
>> > >> in
>> > >>
>> > >> > > /home/ecloud/Downloads/VistA/log/EHR-gui.log?
>> > >> > >
>> > >> > > --
>> > >> > > Nancy Anthracite
>> > >> > >
>> > >> > > On Tuesday, February 21, 2012, you wrote:
>> > >> > > > Nancy,
>> > >> > > >
>> > >> > > > Here you go. The locale information is being placed into the
>> > >>
>> > >> EHR-gui to
>> > >>
>> > >> > > > make sure it should be taken as somehow GT.M was ignoring UTF-8
>> > >>
>> > >>
>> ------------------------------------------------------------------------
>> > >> -
>> > >>
>> > >> > > --
>> > >> > >
>> > >> > > > --------------------------------------- #!/bin/bash
>> > >> > > > #EHR-gui: This is a file to run RPCBroker as a Linux service
>> > >> > > > #make sure of our directory
>> > >> > > > cd /home/ecloud/Downloads/VistA
>> > >> > > > date >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
>> > >> > > > #Get the GTM profile
>> > >> > > > source /etc/profile.d/gtmprofile.sh
>> > >> > > > #set locale
>> > >> > > > export LANG=en_US.UTF-8
>> > >> > > > export LC_CTYPE=en_US.UTF-8
>> > >> > > > export LC_NUMERIC="en_US.UTF-8"
>> > >> > > > export LC_TIME="en_US.UTF-8"
>> > >> > > > export LC_COLLATE="en_US.UTF-8"
>> > >> > > > export LC_MONETARY="en_US.UTF-8"
>> > >> > > > export LC_MESSAGES="en_US.UTF-8"
>> > >> > > > export LC_PAPER="en_US.UTF-8"
>> > >> > > > export LC_NAME="en_US.UTF-8"
>> > >> > > > export LC_ADDRESS="en_US.UTF-8"
>> > >> > > > export LC_TELEPHONE="en_US.UTF-8"
>> > >> > > > export LC_MEASUREMENT="en_US.UTF-8"
>> > >> > > > export LC_IDENTIFICATION="en_US.UTF-8"
>> > >> > > > export LC_ALL=en_US.UTF-8
>> > >> > > > locale >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
>> > >> > > > #Run routine
>> > >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
>> > >> > > > 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log
>> > >>
>> > >>
>> ------------------------------------------------------------------------
>> > >> -
>> > >>
>> > >> > > --
>> > >> > >
>> > >> > > > ----------------------------------
>> > >> > > >
>> > >> > > > When I run from command line
>> > >> > > >
>> > >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
>> > >> > > > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
>> (user-defined
>> > >>
>> > >> error
>> > >>
>> > >> > > > trap)
>> > >> > > > At M source location BREAD+15^XWBRW
>> > >> > > >
>> > >> > > > UTF8>
>> > >> > > >
>> > >> > > >
>> > >> > > >
>> > >> > > >
>> > >> > > > -Jignesh
>> > >> > > >
>> > >> > > > On Tue, Feb 21, 2012 at 7:33 PM, Nancy Anthracite
>> > >> > > > <nanthracite@earthlink.net
>> > >> > > >
>> > >> > > > > wrote:
>> > >> > > > >
>> > >> > > > > Now show me the contents of the file
>> > >> > >
>> > >> > > /home/ecloud/Downloads/VistA/EHR-gui
>> > >> > >
>> > >> > > > > --
>> > >> > > > > Nancy Anthracite
>> > >> > > > >
>> > >> > > > > On Tuesday, February 21, 2012, Jignesh Patel wrote:
>> > >> > > > > > Nancy are you talking about this file.
>> > >> > > > > > [ecloud@s1-iCare-VistA1 xinetd.d]$ cat EHR-gui
>> > >> > > > > > service EHR-gui
>> > >> > > > > >
>> > >> > > > > > {
>> > >> > > > > > port = 9230
>> > >> > > > > > socket_type = stream
>> > >> > > > > > protocol = tcp
>> > >> > > > > > user = ecloud
>> > >> > > > > > server = /home/ecloud/Downloads/VistA/EHR-gui
>> > >> > > > > > type = UNLISTED
>> > >> > > > > > wait = no
>> > >> > > > > > disable = no
>> > >> > > > > > }
>> > >> > > > > >
>> > >> > > > > > On Mon, Feb 20, 2012 at 5:37 PM, Nancy Anthracite
>> > >> > > > > > <nanthracite@earthlink.net
>> > >> > > > > >
>> > >> > > > > > > wrote:
>> > >> > > > > > >
>> > >> > > > > > > Look at the log file for the xinetd connection which is
>> > >>
>> > >> probably
>> > >>
>> > >> > > > > defined
>> > >> > > > >
>> > >> > > > > > > in the "server" code in the xinetd connection file in
>> > >> > >
>> > >> > > /etc/xinetd.d/
>> > >> > >
>> > >> > > > > > > --
>> > >> > > > > > > Nancy Anthracite
>> > >> > > > > > >
>> > >> > > > > > > On Monday, February 20, 2012, Jignesh Patel wrote:
>> > >> > > > > > > > While running Xinetd on FOIA-VistA on gtm we got
>> following
>> > >> > > > > > > > error.
>> > >> > > > > > > >
>> > >> > > > > > > > "Non-empty value assigned to $ECODE (user-defined error
>> > >>
>> > >> trap)
>> > >>
>> > >> > > > > > > > At
>> > >> > >
>> > >> > > M
>> > >> > >
>> > >> > > > > > > > source location BREAD+15^XWBRW"
>> > >> > > > > > > >
>> > >> > > > > > > >
>> > >> > > > > > > > Does anybody encounter the same error?
>> > >> > > > > > > >
>> > >> > > > > > > >
>> > >> > > > > > > > -Jignesh
>>
>>
>

like0

error while executing CPRS

Nancy Anthracite's picture

Did you run ^ZTMGRSET and ^DINIT and ^ZUSET and set up the Taskman site
parameters and all of your devices, etc?

--
Nancy Anthracite

On Wednesday, February 22, 2012, Jignesh Patel wrote:
> May be because I don't have task man running. See below:
>
> I tried to check TASKMAN and found
> Operating System: GT.M (Unix)
> Volume Set: ROU
> Cpu-volume Pair: ROU:s1-iCare-VistA1
> TaskMan Files UCI and Volume Set: ,ROU
>
> Seems there is no UCI setup. Is that a problem?
>
>
> And My task man is not running
> hecking Taskman. Current $H=62509,59871 (Feb 22, 2012@16:37:51)
> RUN NODE=<Undefined>
> Taskman is shutting down not running..
> Checking the Status List:
> Node weight status time $J
> The Status List is empty.
>
> Checking the Schedule List:
> Taskman has no tasks scheduled.
>
> Checking the IO Lists: Last TM scan: 172947 sec,
> There are no tasks waiting for devices.
>
> Checking the Job List:
> There are no tasks waiting for partitions.
>
> Checking the Task List:
> There are no tasks currently running.
> Checking Sub-Managers:
> On node FOI:FOIISCSVR there are no free Sub-Manager(s). Status: Stop
> On node ROU:s1-iCare-VistA1 there are no free Sub-Manager(s). Status:
> Stop
>
> On Wed, Feb 22, 2012 at 11:29 AM, Nancy Anthracite <
>
> nanthracite@earthlink.net> wrote:
> > That log is usually a pretty verbose log and you are apparently not even
> > getting much past square one. It has very little to say. Did you pick
> > the very verbose option, #3?
> >
> > Do be sure you have a null device set up correctly as that is a common
> > reason
> > for a crash and burn, but it usually gives a a different error.
> > --
> > Nancy Anthracite
> >
> > On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > > I see following in the log
> > >
> > > Log from Job 30930 2 Lines
> > > 15:57:38 = Log start: Feb 22, 2012@15:57:38
> > > 15:57:38 = XWBTCPM
> > >
> > > Log from Job 31002 2 Lines
> > > 15:57:48 = Log start: Feb 22, 2012@15:57:48
> > > 15:57:48 = XWBTCPM
> > >
> > > Log from Job 31038 2 Lines
> > > 15:57:53 = Log start: Feb 22, 2012@15:57:53
> > > 15:57:53 = XWBTCPM
> > >
> > > On Wed, Feb 22, 2012 at 10:55 AM, Jignesh Patel
> >
> > <jigneshmpatel@gmail.com>wrote:
> > > > Nancy.
> > > > Sorry I slept let yesterday. I have implemented the step you did
> > > > mention.I have enabled RPC broker debug.
> > > >
> > > > Now what I need to do?
> > > >
> > > >
> > > > On Wed, Feb 22, 2012 at 6:55 AM, Nancy Anthracite <
> > > >
> > > > nanthracite@earthlink.net> wrote:
> > > >> Well, I understand there is a bug in the code so the error trap does
> >
> > not
> >
> > > >> work
> > > >> right so it is hard to know.
> > > >>
> > > >> I have done a port of the FOIA from 12-6-11 and CPRS is connecting
> > > >> OK
> >
> > so
> >
> > > >> I don't know what to say until the error trap is working, and then
> > > >> it will probably take someone else to say.
> > > >>
> > > >> But, we might glean something from the debugger for the broker.
> > > >>
> > > >> Do the following and then try to connect and see what you get in the
> >
> > log
> >
> > > >> when
> > > >> you run the View XWB Log option.
> > > >>
> > > >>
> > > >>
> > > >> GTM>S DUZ=1 D ^XUP
> > > >>
> > > >> Setting up programmer environment
> > > >> This is a TEST account.
> > > >>
> > > >> Terminal Type set to: C-VT220
> > > >>
> > > >> Select OPTION NAME: eve
> > > >>
> > > >> 1 EVE Systems Manager Menu
> > > >> 2 EVENT CAPTURE ECX ECS MAINTENANCE Event Capture
> > > >> 3 EVENT CAPTURE (ECS) EXTRACT AU ECX ECS SOURCE AUDIT
> > > >> Event
> > > >>
> > > >> Capture
> > > >> (ECS) Extract Audit
> > > >>
> > > >> 4 EVENT CAPTURE DATA ENTRY ECENTER Event Capture Data
> > > >> Entry 5 EVENT CAPTURE EXTRACT ECXEC Event Capture
> > > >> Extract
> > > >>
> > > >> Press <RETURN> to see more, '^' to exit this list, OR
> > > >> CHOOSE 1-5: 1 EVE Systems Manager Menu
> > > >>
> > > >> Core Applications ...
> > > >> Device Management ...
> > > >> Menu Management ...
> > > >> Programmer Options ...
> > > >> Operations Management ...
> > > >> Spool Management ...
> > > >> Information Security Officer Menu ...
> > > >> Taskman Management ...
> > > >> User Management ...
> > > >> Application Utilities ...
> > > >> Capacity Planning ...
> > > >> HL7 Main Menu ...
> > > >>
> > > >> You have PENDING ALERTS
> > > >>
> > > >> Enter "VA to jump to VIEW ALERTS option
> > > >>
> > > >> Select Systems Manager Menu Option: operations Management
> > > >>
> > > >> System Status
> > > >> Introductory text edit
> > > >> CPU/Service/User/Device Stats
> > > >>
> > > >> RJD Kill off a users' job
> > > >>
> > > >> Alert Management ...
> > > >> Alpha/Beta Test Option Usage Menu ...
> > > >> Clean old Job Nodes in XUTL
> > > >> Delete Old (>14 d) Alerts
> > > >> Foundations Management
> > > >> Kernel Management Menu ...
> > > >> Post sign-in Text Edit
> > > >> RPC Broker Management Menu ...
> > > >> User Management Menu ...
> > > >>
> > > >> You have PENDING ALERTS
> > > >>
> > > >> Enter "VA to jump to VIEW ALERTS option
> > > >>
> > > >> Select Operations Management Option: rpc Broker Management Menu
> > > >>
> > > >> RPC Listener Edit
> > > >> Start All RPC Broker Listeners
> > > >> Stop All RPC Broker Listeners
> > > >> Clear XWB Log Files
> > > >> Debug Parameter Edit
> > > >> View XWB Log
> > > >>
> > > >> You have PENDING ALERTS
> > > >>
> > > >> Enter "VA to jump to VIEW ALERTS option
> > > >>
> > > >> Select RPC Broker Management Menu Option: debug Parameter Edit
> > > >>
> > > >>
> > > >>
> > > >> ----- Setting RPCBroker debug logging for System:
> > > >> FOIA.PLATINUM.VA.GOV----- Enable Broker Logging: 3 very Verbose
> > > >>
> > > >> RPC Listener Edit
> > > >> Start All RPC Broker Listeners
> > > >> Stop All RPC Broker Listeners
> > > >> Clear XWB Log Files
> > > >> Debug Parameter Edit
> > > >> View XWB Log
> > > >>
> > > >> You have PENDING ALERTS
> > > >>
> > > >> Enter "VA to jump to VIEW ALERTS option
> > > >>
> > > >> Select RPC Broker Management Menu Option:
> > > >>
> > > >> --
> > > >> Nancy Anthracite
> > > >>
> > > >> On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > > >> > Nancy,
> > > >> > I see following;
> > > >> >
> > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE (user-defined
> > > >> > error trap)
> > > >> > At M source location BREAD+15^XWBRW
> > > >> > Wed Feb 22 05:29:38 GMT 2012
> > > >> > LANG=en_US.UTF-8
> > > >> > LC_CTYPE="en_US.UTF-8"
> > > >> > LC_NUMERIC="en_US.UTF-8"
> > > >> > LC_TIME="en_US.UTF-8"
> > > >> > LC_COLLATE="en_US.UTF-8"
> > > >> > LC_MONETARY="en_US.UTF-8"
> > > >> > LC_MESSAGES="en_US.UTF-8"
> > > >> > LC_PAPER="en_US.UTF-8"
> > > >> > LC_NAME="en_US.UTF-8"
> > > >> > LC_ADDRESS="en_US.UTF-8"
> > > >> > LC_TELEPHONE="en_US.UTF-8"
> > > >> > LC_MEASUREMENT="en_US.UTF-8"
> > > >> > LC_IDENTIFICATION="en_US.UTF-8"
> > > >> > LC_ALL=en_US.UTF-8
> > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE (user-defined
> > > >> > error trap)
> > > >> > At M source location BREAD+15^XWBRW
> > > >> > Wed Feb 22 05:29:43 GMT 2012
> > > >> > LANG=en_US.UTF-8
> > > >> > LC_CTYPE="en_US.UTF-8"
> > > >> > LC_NUMERIC="en_US.UTF-8"
> > > >> > LC_TIME="en_US.UTF-8"
> > > >> > LC_COLLATE="en_US.UTF-8"
> > > >> > LC_MONETARY="en_US.UTF-8"
> > > >> > LC_MESSAGES="en_US.UTF-8"
> > > >> > LC_PAPER="en_US.UTF-8"
> > > >> > LC_NAME="en_US.UTF-8"
> > > >> > LC_ADDRESS="en_US.UTF-8"
> > > >> > LC_TELEPHONE="en_US.UTF-8"
> > > >> > LC_MEASUREMENT="en_US.UTF-8"
> > > >> > LC_IDENTIFICATION="en_US.UTF-8"
> > > >> > LC_ALL=en_US.UTF-8
> > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE (user-defined
> > > >> > error trap)
> > > >> > At M source location BREAD+15^XWBRW
> > > >> >
> > > >> > On Tue, Feb 21, 2012 at 10:36 PM, Nancy Anthracite <
> > > >> >
> > > >> > nanthracite@earthlink.net> wrote:
> > > >> > > If that 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log is
> >
> > actually
> >
> > > >> > > on the same line as the line above it in the email, what are you
> > > >> > > seeing
> > > >>
> > > >> in
> > > >>
> > > >> > > /home/ecloud/Downloads/VistA/log/EHR-gui.log?
> > > >> > >
> > > >> > > --
> > > >> > > Nancy Anthracite
> > > >> > >
> > > >> > > On Tuesday, February 21, 2012, you wrote:
> > > >> > > > Nancy,
> > > >> > > >
> > > >> > > > Here you go. The locale information is being placed into the
> > > >>
> > > >> EHR-gui to
> > > >>
> > > >> > > > make sure it should be taken as somehow GT.M was ignoring
> > > >> > > > UTF-8
> >
> > ------------------------------------------------------------------------
> >
> > > >> -
> > > >>
> > > >> > > --
> > > >> > >
> > > >> > > > --------------------------------------- #!/bin/bash
> > > >> > > > #EHR-gui: This is a file to run RPCBroker as a Linux service
> > > >> > > > #make sure of our directory
> > > >> > > > cd /home/ecloud/Downloads/VistA
> > > >> > > > date >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
> > > >> > > > #Get the GTM profile
> > > >> > > > source /etc/profile.d/gtmprofile.sh
> > > >> > > > #set locale
> > > >> > > > export LANG=en_US.UTF-8
> > > >> > > > export LC_CTYPE=en_US.UTF-8
> > > >> > > > export LC_NUMERIC="en_US.UTF-8"
> > > >> > > > export LC_TIME="en_US.UTF-8"
> > > >> > > > export LC_COLLATE="en_US.UTF-8"
> > > >> > > > export LC_MONETARY="en_US.UTF-8"
> > > >> > > > export LC_MESSAGES="en_US.UTF-8"
> > > >> > > > export LC_PAPER="en_US.UTF-8"
> > > >> > > > export LC_NAME="en_US.UTF-8"
> > > >> > > > export LC_ADDRESS="en_US.UTF-8"
> > > >> > > > export LC_TELEPHONE="en_US.UTF-8"
> > > >> > > > export LC_MEASUREMENT="en_US.UTF-8"
> > > >> > > > export LC_IDENTIFICATION="en_US.UTF-8"
> > > >> > > > export LC_ALL=en_US.UTF-8
> > > >> > > > locale >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
> > > >> > > > #Run routine
> > > >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
> > > >> > > > 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log
> >
> > ------------------------------------------------------------------------
> >
> > > >> -
> > > >>
> > > >> > > --
> > > >> > >
> > > >> > > > ----------------------------------
> > > >> > > >
> > > >> > > > When I run from command line
> > > >> > > >
> > > >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
> > > >> > > > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> >
> > (user-defined
> >
> > > >> error
> > > >>
> > > >> > > > trap)
> > > >> > > > At M source location BREAD+15^XWBRW
> > > >> > > >
> > > >> > > > UTF8>
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > > -Jignesh
> > > >> > > >
> > > >> > > > On Tue, Feb 21, 2012 at 7:33 PM, Nancy Anthracite
> > > >> > > > <nanthracite@earthlink.net
> > > >> > > >
> > > >> > > > > wrote:
> > > >> > > > >
> > > >> > > > > Now show me the contents of the file
> > > >> > >
> > > >> > > /home/ecloud/Downloads/VistA/EHR-gui
> > > >> > >
> > > >> > > > > --
> > > >> > > > > Nancy Anthracite
> > > >> > > > >
> > > >> > > > > On Tuesday, February 21, 2012, Jignesh Patel wrote:
> > > >> > > > > > Nancy are you talking about this file.
> > > >> > > > > > [ecloud@s1-iCare-VistA1 xinetd.d]$ cat EHR-gui
> > > >> > > > > > service EHR-gui
> > > >> > > > > >
> > > >> > > > > > {
> > > >> > > > > > port = 9230
> > > >> > > > > > socket_type = stream
> > > >> > > > > > protocol = tcp
> > > >> > > > > > user = ecloud
> > > >> > > > > > server = /home/ecloud/Downloads/VistA/EHR-gui
> > > >> > > > > > type = UNLISTED
> > > >> > > > > > wait = no
> > > >> > > > > > disable = no
> > > >> > > > > > }
> > > >> > > > > >
> > > >> > > > > > On Mon, Feb 20, 2012 at 5:37 PM, Nancy Anthracite
> > > >> > > > > > <nanthracite@earthlink.net
> > > >> > > > > >
> > > >> > > > > > > wrote:
> > > >> > > > > > >
> > > >> > > > > > > Look at the log file for the xinetd connection which is
> > > >>
> > > >> probably
> > > >>
> > > >> > > > > defined
> > > >> > > > >
> > > >> > > > > > > in the "server" code in the xinetd connection file in
> > > >> > >
> > > >> > > /etc/xinetd.d/
> > > >> > >
> > > >> > > > > > > --
> > > >> > > > > > > Nancy Anthracite
> > > >> > > > > > >
> > > >> > > > > > > On Monday, February 20, 2012, Jignesh Patel wrote:
> > > >> > > > > > > > While running Xinetd on FOIA-VistA on gtm we got
> >
> > following
> >
> > > >> > > > > > > > error.
> > > >> > > > > > > >
> > > >> > > > > > > > "Non-empty value assigned to $ECODE (user-defined
> > > >> > > > > > > > error
> > > >>
> > > >> trap)
> > > >>
> > > >> > > > > > > > At
> > > >> > >
> > > >> > > M
> > > >> > >
> > > >> > > > > > > > source location BREAD+15^XWBRW"
> > > >> > > > > > > >
> > > >> > > > > > > >
> > > >> > > > > > > > Does anybody encounter the same error?
> > > >> > > > > > > >
> > > >> > > > > > > >
> > > >> > > > > > > > -Jignesh

like0

error while executing CPRS

Jignesh Patel's picture

Nancy,
I did run ZTMGRSET and ZUSET but not DINIT.

-Jignesh

On Wed, Feb 22, 2012 at 11:46 AM, Nancy Anthracite <
nanthracite@earthlink.net> wrote:

> Did you run ^ZTMGRSET and ^DINIT and ^ZUSET and set up the Taskman site
> parameters and all of your devices, etc?
>
> --
> Nancy Anthracite
>
> On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > May be because I don't have task man running. See below:
> >
> > I tried to check TASKMAN and found
> > Operating System: GT.M (Unix)
> > Volume Set: ROU
> > Cpu-volume Pair: ROU:s1-iCare-VistA1
> > TaskMan Files UCI and Volume Set: ,ROU
> >
> > Seems there is no UCI setup. Is that a problem?
> >
> >
> > And My task man is not running
> > hecking Taskman. Current $H=62509,59871 (Feb 22, 2012@16:37:51)
> > RUN NODE=<Undefined>
> > Taskman is shutting down not running..
> > Checking the Status List:
> > Node weight status time $J
> > The Status List is empty.
> >
> > Checking the Schedule List:
> > Taskman has no tasks scheduled.
> >
> > Checking the IO Lists: Last TM scan: 172947 sec,
> > There are no tasks waiting for devices.
> >
> > Checking the Job List:
> > There are no tasks waiting for partitions.
> >
> > Checking the Task List:
> > There are no tasks currently running.
> > Checking Sub-Managers:
> > On node FOI:FOIISCSVR there are no free Sub-Manager(s). Status: Stop
> > On node ROU:s1-iCare-VistA1 there are no free Sub-Manager(s).
> Status:
> > Stop
> >
> > On Wed, Feb 22, 2012 at 11:29 AM, Nancy Anthracite <
> >
> > nanthracite@earthlink.net> wrote:
> > > That log is usually a pretty verbose log and you are apparently not
> even
> > > getting much past square one. It has very little to say. Did you pick
> > > the very verbose option, #3?
> > >
> > > Do be sure you have a null device set up correctly as that is a common
> > > reason
> > > for a crash and burn, but it usually gives a a different error.
> > > --
> > > Nancy Anthracite
> > >
> > > On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > > > I see following in the log
> > > >
> > > > Log from Job 30930 2 Lines
> > > > 15:57:38 = Log start: Feb 22, 2012@15:57:38
> > > > 15:57:38 = XWBTCPM
> > > >
> > > > Log from Job 31002 2 Lines
> > > > 15:57:48 = Log start: Feb 22, 2012@15:57:48
> > > > 15:57:48 = XWBTCPM
> > > >
> > > > Log from Job 31038 2 Lines
> > > > 15:57:53 = Log start: Feb 22, 2012@15:57:53
> > > > 15:57:53 = XWBTCPM
> > > >
> > > > On Wed, Feb 22, 2012 at 10:55 AM, Jignesh Patel
> > >
> > > <jigneshmpatel@gmail.com>wrote:
> > > > > Nancy.
> > > > > Sorry I slept let yesterday. I have implemented the step you did
> > > > > mention.I have enabled RPC broker debug.
> > > > >
> > > > > Now what I need to do?
> > > > >
> > > > >
> > > > > On Wed, Feb 22, 2012 at 6:55 AM, Nancy Anthracite <
> > > > >
> > > > > nanthracite@earthlink.net> wrote:
> > > > >> Well, I understand there is a bug in the code so the error trap
> does
> > >
> > > not
> > >
> > > > >> work
> > > > >> right so it is hard to know.
> > > > >>
> > > > >> I have done a port of the FOIA from 12-6-11 and CPRS is connecting
> > > > >> OK
> > >
> > > so
> > >
> > > > >> I don't know what to say until the error trap is working, and then
> > > > >> it will probably take someone else to say.
> > > > >>
> > > > >> But, we might glean something from the debugger for the broker.
> > > > >>
> > > > >> Do the following and then try to connect and see what you get in
> the
> > >
> > > log
> > >
> > > > >> when
> > > > >> you run the View XWB Log option.
> > > > >>
> > > > >>
> > > > >>
> > > > >> GTM>S DUZ=1 D ^XUP
> > > > >>
> > > > >> Setting up programmer environment
> > > > >> This is a TEST account.
> > > > >>
> > > > >> Terminal Type set to: C-VT220
> > > > >>
> > > > >> Select OPTION NAME: eve
> > > > >>
> > > > >> 1 EVE Systems Manager Menu
> > > > >> 2 EVENT CAPTURE ECX ECS MAINTENANCE Event Capture
> > > > >> 3 EVENT CAPTURE (ECS) EXTRACT AU ECX ECS SOURCE AUDIT
> > > > >> Event
> > > > >>
> > > > >> Capture
> > > > >> (ECS) Extract Audit
> > > > >>
> > > > >> 4 EVENT CAPTURE DATA ENTRY ECENTER Event Capture Data
> > > > >> Entry 5 EVENT CAPTURE EXTRACT ECXEC Event Capture
> > > > >> Extract
> > > > >>
> > > > >> Press <RETURN> to see more, '^' to exit this list, OR
> > > > >> CHOOSE 1-5: 1 EVE Systems Manager Menu
> > > > >>
> > > > >> Core Applications ...
> > > > >> Device Management ...
> > > > >> Menu Management ...
> > > > >> Programmer Options ...
> > > > >> Operations Management ...
> > > > >> Spool Management ...
> > > > >> Information Security Officer Menu ...
> > > > >> Taskman Management ...
> > > > >> User Management ...
> > > > >> Application Utilities ...
> > > > >> Capacity Planning ...
> > > > >> HL7 Main Menu ...
> > > > >>
> > > > >> You have PENDING ALERTS
> > > > >>
> > > > >> Enter "VA to jump to VIEW ALERTS option
> > > > >>
> > > > >> Select Systems Manager Menu Option: operations Management
> > > > >>
> > > > >> System Status
> > > > >> Introductory text edit
> > > > >> CPU/Service/User/Device Stats
> > > > >>
> > > > >> RJD Kill off a users' job
> > > > >>
> > > > >> Alert Management ...
> > > > >> Alpha/Beta Test Option Usage Menu ...
> > > > >> Clean old Job Nodes in XUTL
> > > > >> Delete Old (>14 d) Alerts
> > > > >> Foundations Management
> > > > >> Kernel Management Menu ...
> > > > >> Post sign-in Text Edit
> > > > >> RPC Broker Management Menu ...
> > > > >> User Management Menu ...
> > > > >>
> > > > >> You have PENDING ALERTS
> > > > >>
> > > > >> Enter "VA to jump to VIEW ALERTS option
> > > > >>
> > > > >> Select Operations Management Option: rpc Broker Management Menu
> > > > >>
> > > > >> RPC Listener Edit
> > > > >> Start All RPC Broker Listeners
> > > > >> Stop All RPC Broker Listeners
> > > > >> Clear XWB Log Files
> > > > >> Debug Parameter Edit
> > > > >> View XWB Log
> > > > >>
> > > > >> You have PENDING ALERTS
> > > > >>
> > > > >> Enter "VA to jump to VIEW ALERTS option
> > > > >>
> > > > >> Select RPC Broker Management Menu Option: debug Parameter Edit
> > > > >>
> > > > >>
> > > > >>
> > > > >> ----- Setting RPCBroker debug logging for System:
> > > > >> FOIA.PLATINUM.VA.GOV----- Enable Broker Logging: 3 very Verbose
> > > > >>
> > > > >> RPC Listener Edit
> > > > >> Start All RPC Broker Listeners
> > > > >> Stop All RPC Broker Listeners
> > > > >> Clear XWB Log Files
> > > > >> Debug Parameter Edit
> > > > >> View XWB Log
> > > > >>
> > > > >> You have PENDING ALERTS
> > > > >>
> > > > >> Enter "VA to jump to VIEW ALERTS option
> > > > >>
> > > > >> Select RPC Broker Management Menu Option:
> > > > >>
> > > > >> --
> > > > >> Nancy Anthracite
> > > > >>
> > > > >> On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > > > >> > Nancy,
> > > > >> > I see following;
> > > > >> >
> > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> (user-defined
> > > > >> > error trap)
> > > > >> > At M source location BREAD+15^XWBRW
> > > > >> > Wed Feb 22 05:29:38 GMT 2012
> > > > >> > LANG=en_US.UTF-8
> > > > >> > LC_CTYPE="en_US.UTF-8"
> > > > >> > LC_NUMERIC="en_US.UTF-8"
> > > > >> > LC_TIME="en_US.UTF-8"
> > > > >> > LC_COLLATE="en_US.UTF-8"
> > > > >> > LC_MONETARY="en_US.UTF-8"
> > > > >> > LC_MESSAGES="en_US.UTF-8"
> > > > >> > LC_PAPER="en_US.UTF-8"
> > > > >> > LC_NAME="en_US.UTF-8"
> > > > >> > LC_ADDRESS="en_US.UTF-8"
> > > > >> > LC_TELEPHONE="en_US.UTF-8"
> > > > >> > LC_MEASUREMENT="en_US.UTF-8"
> > > > >> > LC_IDENTIFICATION="en_US.UTF-8"
> > > > >> > LC_ALL=en_US.UTF-8
> > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> (user-defined
> > > > >> > error trap)
> > > > >> > At M source location BREAD+15^XWBRW
> > > > >> > Wed Feb 22 05:29:43 GMT 2012
> > > > >> > LANG=en_US.UTF-8
> > > > >> > LC_CTYPE="en_US.UTF-8"
> > > > >> > LC_NUMERIC="en_US.UTF-8"
> > > > >> > LC_TIME="en_US.UTF-8"
> > > > >> > LC_COLLATE="en_US.UTF-8"
> > > > >> > LC_MONETARY="en_US.UTF-8"
> > > > >> > LC_MESSAGES="en_US.UTF-8"
> > > > >> > LC_PAPER="en_US.UTF-8"
> > > > >> > LC_NAME="en_US.UTF-8"
> > > > >> > LC_ADDRESS="en_US.UTF-8"
> > > > >> > LC_TELEPHONE="en_US.UTF-8"
> > > > >> > LC_MEASUREMENT="en_US.UTF-8"
> > > > >> > LC_IDENTIFICATION="en_US.UTF-8"
> > > > >> > LC_ALL=en_US.UTF-8
> > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> (user-defined
> > > > >> > error trap)
> > > > >> > At M source location BREAD+15^XWBRW
> > > > >> >
> > > > >> > On Tue, Feb 21, 2012 at 10:36 PM, Nancy Anthracite <
> > > > >> >
> > > > >> > nanthracite@earthlink.net> wrote:
> > > > >> > > If that 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log is
> > >
> > > actually
> > >
> > > > >> > > on the same line as the line above it in the email, what are
> you
> > > > >> > > seeing
> > > > >>
> > > > >> in
> > > > >>
> > > > >> > > /home/ecloud/Downloads/VistA/log/EHR-gui.log?
> > > > >> > >
> > > > >> > > --
> > > > >> > > Nancy Anthracite
> > > > >> > >
> > > > >> > > On Tuesday, February 21, 2012, you wrote:
> > > > >> > > > Nancy,
> > > > >> > > >
> > > > >> > > > Here you go. The locale information is being placed into the
> > > > >>
> > > > >> EHR-gui to
> > > > >>
> > > > >> > > > make sure it should be taken as somehow GT.M was ignoring
> > > > >> > > > UTF-8
> > >
> > >
> ------------------------------------------------------------------------
> > >
> > > > >> -
> > > > >>
> > > > >> > > --
> > > > >> > >
> > > > >> > > > --------------------------------------- #!/bin/bash
> > > > >> > > > #EHR-gui: This is a file to run RPCBroker as a Linux service
> > > > >> > > > #make sure of our directory
> > > > >> > > > cd /home/ecloud/Downloads/VistA
> > > > >> > > > date >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
> > > > >> > > > #Get the GTM profile
> > > > >> > > > source /etc/profile.d/gtmprofile.sh
> > > > >> > > > #set locale
> > > > >> > > > export LANG=en_US.UTF-8
> > > > >> > > > export LC_CTYPE=en_US.UTF-8
> > > > >> > > > export LC_NUMERIC="en_US.UTF-8"
> > > > >> > > > export LC_TIME="en_US.UTF-8"
> > > > >> > > > export LC_COLLATE="en_US.UTF-8"
> > > > >> > > > export LC_MONETARY="en_US.UTF-8"
> > > > >> > > > export LC_MESSAGES="en_US.UTF-8"
> > > > >> > > > export LC_PAPER="en_US.UTF-8"
> > > > >> > > > export LC_NAME="en_US.UTF-8"
> > > > >> > > > export LC_ADDRESS="en_US.UTF-8"
> > > > >> > > > export LC_TELEPHONE="en_US.UTF-8"
> > > > >> > > > export LC_MEASUREMENT="en_US.UTF-8"
> > > > >> > > > export LC_IDENTIFICATION="en_US.UTF-8"
> > > > >> > > > export LC_ALL=en_US.UTF-8
> > > > >> > > > locale >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
> > > > >> > > > #Run routine
> > > > >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
> > > > >> > > > 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log
> > >
> > >
> ------------------------------------------------------------------------
> > >
> > > > >> -
> > > > >>
> > > > >> > > --
> > > > >> > >
> > > > >> > > > ----------------------------------
> > > > >> > > >
> > > > >> > > > When I run from command line
> > > > >> > > >
> > > > >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
> > > > >> > > > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> > >
> > > (user-defined
> > >
> > > > >> error
> > > > >>
> > > > >> > > > trap)
> > > > >> > > > At M source location BREAD+15^XWBRW
> > > > >> > > >
> > > > >> > > > UTF8>
> > > > >> > > >
> > > > >> > > >
> > > > >> > > >
> > > > >> > > >
> > > > >> > > > -Jignesh
> > > > >> > > >
> > > > >> > > > On Tue, Feb 21, 2012 at 7:33 PM, Nancy Anthracite
> > > > >> > > > <nanthracite@earthlink.net
> > > > >> > > >
> > > > >> > > > > wrote:
> > > > >> > > > >
> > > > >> > > > > Now show me the contents of the file
> > > > >> > >
> > > > >> > > /home/ecloud/Downloads/VistA/EHR-gui
> > > > >> > >
> > > > >> > > > > --
> > > > >> > > > > Nancy Anthracite
> > > > >> > > > >
> > > > >> > > > > On Tuesday, February 21, 2012, Jignesh Patel wrote:
> > > > >> > > > > > Nancy are you talking about this file.
> > > > >> > > > > > [ecloud@s1-iCare-VistA1 xinetd.d]$ cat EHR-gui
> > > > >> > > > > > service EHR-gui
> > > > >> > > > > >
> > > > >> > > > > > {
> > > > >> > > > > > port = 9230
> > > > >> > > > > > socket_type = stream
> > > > >> > > > > > protocol = tcp
> > > > >> > > > > > user = ecloud
> > > > >> > > > > > server = /home/ecloud/Downloads/VistA/EHR-gui
> > > > >> > > > > > type = UNLISTED
> > > > >> > > > > > wait = no
> > > > >> > > > > > disable = no
> > > > >> > > > > > }
> > > > >> > > > > >
> > > > >> > > > > > On Mon, Feb 20, 2012 at 5:37 PM, Nancy Anthracite
> > > > >> > > > > > <nanthracite@earthlink.net
> > > > >> > > > > >
> > > > >> > > > > > > wrote:
> > > > >> > > > > > >
> > > > >> > > > > > > Look at the log file for the xinetd connection which
> is
> > > > >>
> > > > >> probably
> > > > >>
> > > > >> > > > > defined
> > > > >> > > > >
> > > > >> > > > > > > in the "server" code in the xinetd connection file in
> > > > >> > >
> > > > >> > > /etc/xinetd.d/
> > > > >> > >
> > > > >> > > > > > > --
> > > > >> > > > > > > Nancy Anthracite
> > > > >> > > > > > >
> > > > >> > > > > > > On Monday, February 20, 2012, Jignesh Patel wrote:
> > > > >> > > > > > > > While running Xinetd on FOIA-VistA on gtm we got
> > >
> > > following
> > >
> > > > >> > > > > > > > error.
> > > > >> > > > > > > >
> > > > >> > > > > > > > "Non-empty value assigned to $ECODE (user-defined
> > > > >> > > > > > > > error
> > > > >>
> > > > >> trap)
> > > > >>
> > > > >> > > > > > > > At
> > > > >> > >
> > > > >> > > M
> > > > >> > >
> > > > >> > > > > > > > source location BREAD+15^XWBRW"
> > > > >> > > > > > > >
> > > > >> > > > > > > >
> > > > >> > > > > > > > Does anybody encounter the same error?
> > > > >> > > > > > > >
> > > > >> > > > > > > >
> > > > >> > > > > > > > -Jignesh
>
>

like0

error while executing CPRS

Nancy Anthracite's picture

From the " ,ROU", I am not sure it is right. Show me what you get with
D ^ZTMON.

--
Nancy Anthracite

On Wednesday, February 22, 2012, Jignesh Patel wrote:
> Nancy,
> I did run ZTMGRSET and ZUSET but not DINIT.
>
> -Jignesh
>
> On Wed, Feb 22, 2012 at 11:46 AM, Nancy Anthracite <
>
> nanthracite@earthlink.net> wrote:
> > Did you run ^ZTMGRSET and ^DINIT and ^ZUSET and set up the Taskman site
> > parameters and all of your devices, etc?
> >
> > --
> > Nancy Anthracite
> >
> > On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > > May be because I don't have task man running. See below:
> > >
> > > I tried to check TASKMAN and found
> > >
> > > Operating System: GT.M (Unix)
> > > Volume Set: ROU
> > > Cpu-volume Pair: ROU:s1-iCare-VistA1
> > > TaskMan Files UCI and Volume Set: ,ROU
> > >
> > > Seems there is no UCI setup. Is that a problem?
> > >
> > >
> > > And My task man is not running
> > > hecking Taskman. Current $H=62509,59871 (Feb 22, 2012@16:37:51)
> > >
> > > RUN NODE=<Undefined>
> > >
> > > Taskman is shutting down not running..
> > >
> > > Checking the Status List:
> > > Node weight status time $J
> > >
> > > The Status List is empty.
> > >
> > > Checking the Schedule List:
> > > Taskman has no tasks scheduled.
> > >
> > > Checking the IO Lists: Last TM scan: 172947 sec,
> > >
> > > There are no tasks waiting for devices.
> > >
> > > Checking the Job List:
> > > There are no tasks waiting for partitions.
> > >
> > > Checking the Task List:
> > > There are no tasks currently running.
> > >
> > > Checking Sub-Managers:
> > > On node FOI:FOIISCSVR there are no free Sub-Manager(s). Status:
> > > Stop On node ROU:s1-iCare-VistA1 there are no free
> > > Sub-Manager(s).
> >
> > Status:
> > > Stop
> > >
> > > On Wed, Feb 22, 2012 at 11:29 AM, Nancy Anthracite <
> > >
> > > nanthracite@earthlink.net> wrote:
> > > > That log is usually a pretty verbose log and you are apparently not
> >
> > even
> >
> > > > getting much past square one. It has very little to say. Did you
> > > > pick the very verbose option, #3?
> > > >
> > > > Do be sure you have a null device set up correctly as that is a
> > > > common reason
> > > > for a crash and burn, but it usually gives a a different error.
> > > > --
> > > > Nancy Anthracite
> > > >
> > > > On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > > > > I see following in the log
> > > > >
> > > > > Log from Job 30930 2 Lines
> > > > > 15:57:38 = Log start: Feb 22, 2012@15:57:38
> > > > > 15:57:38 = XWBTCPM
> > > > >
> > > > > Log from Job 31002 2 Lines
> > > > > 15:57:48 = Log start: Feb 22, 2012@15:57:48
> > > > > 15:57:48 = XWBTCPM
> > > > >
> > > > > Log from Job 31038 2 Lines
> > > > > 15:57:53 = Log start: Feb 22, 2012@15:57:53
> > > > > 15:57:53 = XWBTCPM
> > > > >
> > > > > On Wed, Feb 22, 2012 at 10:55 AM, Jignesh Patel
> > > >
> > > > <jigneshmpatel@gmail.com>wrote:
> > > > > > Nancy.
> > > > > > Sorry I slept let yesterday. I have implemented the step you did
> > > > > > mention.I have enabled RPC broker debug.
> > > > > >
> > > > > > Now what I need to do?
> > > > > >
> > > > > >
> > > > > > On Wed, Feb 22, 2012 at 6:55 AM, Nancy Anthracite <
> > > > > >
> > > > > > nanthracite@earthlink.net> wrote:
> > > > > >> Well, I understand there is a bug in the code so the error trap
> >
> > does
> >
> > > > not
> > > >
> > > > > >> work
> > > > > >> right so it is hard to know.
> > > > > >>
> > > > > >> I have done a port of the FOIA from 12-6-11 and CPRS is
> > > > > >> connecting OK
> > > >
> > > > so
> > > >
> > > > > >> I don't know what to say until the error trap is working, and
> > > > > >> then it will probably take someone else to say.
> > > > > >>
> > > > > >> But, we might glean something from the debugger for the broker.
> > > > > >>
> > > > > >> Do the following and then try to connect and see what you get in
> >
> > the
> >
> > > > log
> > > >
> > > > > >> when
> > > > > >> you run the View XWB Log option.
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >> GTM>S DUZ=1 D ^XUP
> > > > > >>
> > > > > >> Setting up programmer environment
> > > > > >> This is a TEST account.
> > > > > >>
> > > > > >> Terminal Type set to: C-VT220
> > > > > >>
> > > > > >> Select OPTION NAME: eve
> > > > > >>
> > > > > >> 1 EVE Systems Manager Menu
> > > > > >> 2 EVENT CAPTURE ECX ECS MAINTENANCE Event Capture
> > > > > >> 3 EVENT CAPTURE (ECS) EXTRACT AU ECX ECS SOURCE AUDIT
> > > > > >> Event
> > > > > >>
> > > > > >> Capture
> > > > > >> (ECS) Extract Audit
> > > > > >>
> > > > > >> 4 EVENT CAPTURE DATA ENTRY ECENTER Event Capture Data
> > > > > >> Entry 5 EVENT CAPTURE EXTRACT ECXEC Event Capture
> > > > > >> Extract
> > > > > >>
> > > > > >> Press <RETURN> to see more, '^' to exit this list, OR
> > > > > >> CHOOSE 1-5: 1 EVE Systems Manager Menu
> > > > > >>
> > > > > >> Core Applications ...
> > > > > >> Device Management ...
> > > > > >> Menu Management ...
> > > > > >> Programmer Options ...
> > > > > >> Operations Management ...
> > > > > >> Spool Management ...
> > > > > >> Information Security Officer Menu ...
> > > > > >> Taskman Management ...
> > > > > >> User Management ...
> > > > > >> Application Utilities ...
> > > > > >> Capacity Planning ...
> > > > > >> HL7 Main Menu ...
> > > > > >>
> > > > > >> You have PENDING ALERTS
> > > > > >>
> > > > > >> Enter "VA to jump to VIEW ALERTS option
> > > > > >>
> > > > > >> Select Systems Manager Menu Option: operations Management
> > > > > >>
> > > > > >> System Status
> > > > > >> Introductory text edit
> > > > > >> CPU/Service/User/Device Stats
> > > > > >>
> > > > > >> RJD Kill off a users' job
> > > > > >>
> > > > > >> Alert Management ...
> > > > > >> Alpha/Beta Test Option Usage Menu ...
> > > > > >> Clean old Job Nodes in XUTL
> > > > > >> Delete Old (>14 d) Alerts
> > > > > >> Foundations Management
> > > > > >> Kernel Management Menu ...
> > > > > >> Post sign-in Text Edit
> > > > > >> RPC Broker Management Menu ...
> > > > > >> User Management Menu ...
> > > > > >>
> > > > > >> You have PENDING ALERTS
> > > > > >>
> > > > > >> Enter "VA to jump to VIEW ALERTS option
> > > > > >>
> > > > > >> Select Operations Management Option: rpc Broker Management Menu
> > > > > >>
> > > > > >> RPC Listener Edit
> > > > > >> Start All RPC Broker Listeners
> > > > > >> Stop All RPC Broker Listeners
> > > > > >> Clear XWB Log Files
> > > > > >> Debug Parameter Edit
> > > > > >> View XWB Log
> > > > > >>
> > > > > >> You have PENDING ALERTS
> > > > > >>
> > > > > >> Enter "VA to jump to VIEW ALERTS option
> > > > > >>
> > > > > >> Select RPC Broker Management Menu Option: debug Parameter Edit
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >> ----- Setting RPCBroker debug logging for System:
> > > > > >> FOIA.PLATINUM.VA.GOV----- Enable Broker Logging: 3 very Verbose
> > > > > >>
> > > > > >> RPC Listener Edit
> > > > > >> Start All RPC Broker Listeners
> > > > > >> Stop All RPC Broker Listeners
> > > > > >> Clear XWB Log Files
> > > > > >> Debug Parameter Edit
> > > > > >> View XWB Log
> > > > > >>
> > > > > >> You have PENDING ALERTS
> > > > > >>
> > > > > >> Enter "VA to jump to VIEW ALERTS option
> > > > > >>
> > > > > >> Select RPC Broker Management Menu Option:
> > > > > >>
> > > > > >> --
> > > > > >> Nancy Anthracite
> > > > > >>
> > > > > >> On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > > > > >> > Nancy,
> > > > > >> > I see following;
> > > > > >> >
> > > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> >
> > (user-defined
> >
> > > > > >> > error trap)
> > > > > >> > At M source location BREAD+15^XWBRW
> > > > > >> > Wed Feb 22 05:29:38 GMT 2012
> > > > > >> > LANG=en_US.UTF-8
> > > > > >> > LC_CTYPE="en_US.UTF-8"
> > > > > >> > LC_NUMERIC="en_US.UTF-8"
> > > > > >> > LC_TIME="en_US.UTF-8"
> > > > > >> > LC_COLLATE="en_US.UTF-8"
> > > > > >> > LC_MONETARY="en_US.UTF-8"
> > > > > >> > LC_MESSAGES="en_US.UTF-8"
> > > > > >> > LC_PAPER="en_US.UTF-8"
> > > > > >> > LC_NAME="en_US.UTF-8"
> > > > > >> > LC_ADDRESS="en_US.UTF-8"
> > > > > >> > LC_TELEPHONE="en_US.UTF-8"
> > > > > >> > LC_MEASUREMENT="en_US.UTF-8"
> > > > > >> > LC_IDENTIFICATION="en_US.UTF-8"
> > > > > >> > LC_ALL=en_US.UTF-8
> > > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> >
> > (user-defined
> >
> > > > > >> > error trap)
> > > > > >> > At M source location BREAD+15^XWBRW
> > > > > >> > Wed Feb 22 05:29:43 GMT 2012
> > > > > >> > LANG=en_US.UTF-8
> > > > > >> > LC_CTYPE="en_US.UTF-8"
> > > > > >> > LC_NUMERIC="en_US.UTF-8"
> > > > > >> > LC_TIME="en_US.UTF-8"
> > > > > >> > LC_COLLATE="en_US.UTF-8"
> > > > > >> > LC_MONETARY="en_US.UTF-8"
> > > > > >> > LC_MESSAGES="en_US.UTF-8"
> > > > > >> > LC_PAPER="en_US.UTF-8"
> > > > > >> > LC_NAME="en_US.UTF-8"
> > > > > >> > LC_ADDRESS="en_US.UTF-8"
> > > > > >> > LC_TELEPHONE="en_US.UTF-8"
> > > > > >> > LC_MEASUREMENT="en_US.UTF-8"
> > > > > >> > LC_IDENTIFICATION="en_US.UTF-8"
> > > > > >> > LC_ALL=en_US.UTF-8
> > > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> >
> > (user-defined
> >
> > > > > >> > error trap)
> > > > > >> > At M source location BREAD+15^XWBRW
> > > > > >> >
> > > > > >> > On Tue, Feb 21, 2012 at 10:36 PM, Nancy Anthracite <
> > > > > >> >
> > > > > >> > nanthracite@earthlink.net> wrote:
> > > > > >> > > If that 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log is
> > > >
> > > > actually
> > > >
> > > > > >> > > on the same line as the line above it in the email, what are
> >
> > you
> >
> > > > > >> > > seeing
> > > > > >>
> > > > > >> in
> > > > > >>
> > > > > >> > > /home/ecloud/Downloads/VistA/log/EHR-gui.log?
> > > > > >> > >
> > > > > >> > > --
> > > > > >> > > Nancy Anthracite
> > > > > >> > >
> > > > > >> > > On Tuesday, February 21, 2012, you wrote:
> > > > > >> > > > Nancy,
> > > > > >> > > >
> > > > > >> > > > Here you go. The locale information is being placed into
> > > > > >> > > > the
> > > > > >>
> > > > > >> EHR-gui to
> > > > > >>
> > > > > >> > > > make sure it should be taken as somehow GT.M was ignoring
> > > > > >> > > > UTF-8
> >
> > ------------------------------------------------------------------------
> >
> > > > > >> -
> > > > > >>
> > > > > >> > > --
> > > > > >> > >
> > > > > >> > > > --------------------------------------- #!/bin/bash
> > > > > >> > > > #EHR-gui: This is a file to run RPCBroker as a Linux
> > > > > >> > > > service #make sure of our directory
> > > > > >> > > > cd /home/ecloud/Downloads/VistA
> > > > > >> > > > date >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
> > > > > >> > > > #Get the GTM profile
> > > > > >> > > > source /etc/profile.d/gtmprofile.sh
> > > > > >> > > > #set locale
> > > > > >> > > > export LANG=en_US.UTF-8
> > > > > >> > > > export LC_CTYPE=en_US.UTF-8
> > > > > >> > > > export LC_NUMERIC="en_US.UTF-8"
> > > > > >> > > > export LC_TIME="en_US.UTF-8"
> > > > > >> > > > export LC_COLLATE="en_US.UTF-8"
> > > > > >> > > > export LC_MONETARY="en_US.UTF-8"
> > > > > >> > > > export LC_MESSAGES="en_US.UTF-8"
> > > > > >> > > > export LC_PAPER="en_US.UTF-8"
> > > > > >> > > > export LC_NAME="en_US.UTF-8"
> > > > > >> > > > export LC_ADDRESS="en_US.UTF-8"
> > > > > >> > > > export LC_TELEPHONE="en_US.UTF-8"
> > > > > >> > > > export LC_MEASUREMENT="en_US.UTF-8"
> > > > > >> > > > export LC_IDENTIFICATION="en_US.UTF-8"
> > > > > >> > > > export LC_ALL=en_US.UTF-8
> > > > > >> > > > locale >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
> > > > > >> > > > #Run routine
> > > > > >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
> > > > > >> > > > 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log
> >
> > ------------------------------------------------------------------------
> >
> > > > > >> -
> > > > > >>
> > > > > >> > > --
> > > > > >> > >
> > > > > >> > > > ----------------------------------
> > > > > >> > > >
> > > > > >> > > > When I run from command line
> > > > > >> > > >
> > > > > >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
> > > > > >> > > > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> > > >
> > > > (user-defined
> > > >
> > > > > >> error
> > > > > >>
> > > > > >> > > > trap)
> > > > > >> > > > At M source location BREAD+15^XWBRW
> > > > > >> > > >
> > > > > >> > > > UTF8>
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > > -Jignesh
> > > > > >> > > >
> > > > > >> > > > On Tue, Feb 21, 2012 at 7:33 PM, Nancy Anthracite
> > > > > >> > > > <nanthracite@earthlink.net
> > > > > >> > > >
> > > > > >> > > > > wrote:
> > > > > >> > > > >
> > > > > >> > > > > Now show me the contents of the file
> > > > > >> > >
> > > > > >> > > /home/ecloud/Downloads/VistA/EHR-gui
> > > > > >> > >
> > > > > >> > > > > --
> > > > > >> > > > > Nancy Anthracite
> > > > > >> > > > >
> > > > > >> > > > > On Tuesday, February 21, 2012, Jignesh Patel wrote:
> > > > > >> > > > > > Nancy are you talking about this file.
> > > > > >> > > > > > [ecloud@s1-iCare-VistA1 xinetd.d]$ cat EHR-gui
> > > > > >> > > > > > service EHR-gui
> > > > > >> > > > > >
> > > > > >> > > > > > {
> > > > > >> > > > > > port = 9230
> > > > > >> > > > > > socket_type = stream
> > > > > >> > > > > > protocol = tcp
> > > > > >> > > > > > user = ecloud
> > > > > >> > > > > > server = /home/ecloud/Downloads/VistA/EHR-gui
> > > > > >> > > > > > type = UNLISTED
> > > > > >> > > > > > wait = no
> > > > > >> > > > > > disable = no
> > > > > >> > > > > > }
> > > > > >> > > > > >
> > > > > >> > > > > > On Mon, Feb 20, 2012 at 5:37 PM, Nancy Anthracite
> > > > > >> > > > > > <nanthracite@earthlink.net
> > > > > >> > > > > >
> > > > > >> > > > > > > wrote:
> > > > > >> > > > > > >
> > > > > >> > > > > > > Look at the log file for the xinetd connection which
> >
> > is
> >
> > > > > >> probably
> > > > > >>
> > > > > >> > > > > defined
> > > > > >> > > > >
> > > > > >> > > > > > > in the "server" code in the xinetd connection file
> > > > > >> > > > > > > in
> > > > > >> > >
> > > > > >> > > /etc/xinetd.d/
> > > > > >> > >
> > > > > >> > > > > > > --
> > > > > >> > > > > > > Nancy Anthracite
> > > > > >> > > > > > >
> > > > > >> > > > > > > On Monday, February 20, 2012, Jignesh Patel wrote:
> > > > > >> > > > > > > > While running Xinetd on FOIA-VistA on gtm we got
> > > >
> > > > following
> > > >
> > > > > >> > > > > > > > error.
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > "Non-empty value assigned to $ECODE (user-defined
> > > > > >> > > > > > > > error
> > > > > >>
> > > > > >> trap)
> > > > > >>
> > > > > >> > > > > > > > At
> > > > > >> > >
> > > > > >> > > M
> > > > > >> > >
> > > > > >> > > > > > > > source location BREAD+15^XWBRW"
> > > > > >> > > > > > > >
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > Does anybody encounter the same error?
> > > > > >> > > > > > > >
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > -Jignesh

like0

error while executing CPRS

Jignesh Patel's picture

Here is out of D ^ZTMON

Checking Taskman. Current $H=62509,61341 (Feb 22, 2012@17:02:21)
RUN NODE=62509,61332 (Feb 22, 2012@17:02:12)
Taskman is current..
Checking the Status List:
Node weight status time $J
ROU:s1-iCare-VistA1 RUN T@17:02:12 26684 Main Loop

Checking the Schedule List:
Taskman has no tasks scheduled.

Checking the IO Lists: Last TM scan: 2 sec,
There are no tasks waiting for devices.

Checking the Job List:
There are no tasks waiting for partitions.

Checking the Task List:
There are no tasks currently running.
Checking Sub-Managers:
On node FOI:FOIISCSVR there are no free Sub-Manager(s). Status: Run
On node ROU:s1-iCare-VistA1 there are 4 free Sub-Manager(s). Status:
Run

Enter monitor action: UPDATE//

Also when I tried to check Volume it shows me
Select VOLUME SET: ?
Answer with VOLUME SET:
FOI

You may enter a new VOLUME SET, if you wish
Answer must be 3-30 characters in length.

However my Volume is ROU.

And
UTF8>D GETENV^%ZOSV W Y
VAH^ROU^s1-iCare-VistA1^ROU:s1-iCare-VistA1

On Wed, Feb 22, 2012 at 11:52 AM, Nancy Anthracite <
nanthracite@earthlink.net> wrote:

> From the " ,ROU", I am not sure it is right. Show me what you get with
> D ^ZTMON.
>
> --
> Nancy Anthracite
>
> On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > Nancy,
> > I did run ZTMGRSET and ZUSET but not DINIT.
> >
> > -Jignesh
> >
> > On Wed, Feb 22, 2012 at 11:46 AM, Nancy Anthracite <
> >
> > nanthracite@earthlink.net> wrote:
> > > Did you run ^ZTMGRSET and ^DINIT and ^ZUSET and set up the Taskman site
> > > parameters and all of your devices, etc?
> > >
> > > --
> > > Nancy Anthracite
> > >
> > > On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > > > May be because I don't have task man running. See below:
> > > >
> > > > I tried to check TASKMAN and found
> > > >
> > > > Operating System: GT.M (Unix)
> > > > Volume Set: ROU
> > > > Cpu-volume Pair: ROU:s1-iCare-VistA1
> > > > TaskMan Files UCI and Volume Set: ,ROU
> > > >
> > > > Seems there is no UCI setup. Is that a problem?
> > > >
> > > >
> > > > And My task man is not running
> > > > hecking Taskman. Current $H=62509,59871 (Feb 22, 2012@16:37:51)
> > > >
> > > > RUN NODE=<Undefined>
> > > >
> > > > Taskman is shutting down not running..
> > > >
> > > > Checking the Status List:
> > > > Node weight status time $J
> > > >
> > > > The Status List is empty.
> > > >
> > > > Checking the Schedule List:
> > > > Taskman has no tasks scheduled.
> > > >
> > > > Checking the IO Lists: Last TM scan: 172947 sec,
> > > >
> > > > There are no tasks waiting for devices.
> > > >
> > > > Checking the Job List:
> > > > There are no tasks waiting for partitions.
> > > >
> > > > Checking the Task List:
> > > > There are no tasks currently running.
> > > >
> > > > Checking Sub-Managers:
> > > > On node FOI:FOIISCSVR there are no free Sub-Manager(s). Status:
> > > > Stop On node ROU:s1-iCare-VistA1 there are no free
> > > > Sub-Manager(s).
> > >
> > > Status:
> > > > Stop
> > > >
> > > > On Wed, Feb 22, 2012 at 11:29 AM, Nancy Anthracite <
> > > >
> > > > nanthracite@earthlink.net> wrote:
> > > > > That log is usually a pretty verbose log and you are apparently not
> > >
> > > even
> > >
> > > > > getting much past square one. It has very little to say. Did you
> > > > > pick the very verbose option, #3?
> > > > >
> > > > > Do be sure you have a null device set up correctly as that is a
> > > > > common reason
> > > > > for a crash and burn, but it usually gives a a different error.
> > > > > --
> > > > > Nancy Anthracite
> > > > >
> > > > > On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > > > > > I see following in the log
> > > > > >
> > > > > > Log from Job 30930 2 Lines
> > > > > > 15:57:38 = Log start: Feb 22, 2012@15:57:38
> > > > > > 15:57:38 = XWBTCPM
> > > > > >
> > > > > > Log from Job 31002 2 Lines
> > > > > > 15:57:48 = Log start: Feb 22, 2012@15:57:48
> > > > > > 15:57:48 = XWBTCPM
> > > > > >
> > > > > > Log from Job 31038 2 Lines
> > > > > > 15:57:53 = Log start: Feb 22, 2012@15:57:53
> > > > > > 15:57:53 = XWBTCPM
> > > > > >
> > > > > > On Wed, Feb 22, 2012 at 10:55 AM, Jignesh Patel
> > > > >
> > > > > <jigneshmpatel@gmail.com>wrote:
> > > > > > > Nancy.
> > > > > > > Sorry I slept let yesterday. I have implemented the step you
> did
> > > > > > > mention.I have enabled RPC broker debug.
> > > > > > >
> > > > > > > Now what I need to do?
> > > > > > >
> > > > > > >
> > > > > > > On Wed, Feb 22, 2012 at 6:55 AM, Nancy Anthracite <
> > > > > > >
> > > > > > > nanthracite@earthlink.net> wrote:
> > > > > > >> Well, I understand there is a bug in the code so the error
> trap
> > >
> > > does
> > >
> > > > > not
> > > > >
> > > > > > >> work
> > > > > > >> right so it is hard to know.
> > > > > > >>
> > > > > > >> I have done a port of the FOIA from 12-6-11 and CPRS is
> > > > > > >> connecting OK
> > > > >
> > > > > so
> > > > >
> > > > > > >> I don't know what to say until the error trap is working, and
> > > > > > >> then it will probably take someone else to say.
> > > > > > >>
> > > > > > >> But, we might glean something from the debugger for the
> broker.
> > > > > > >>
> > > > > > >> Do the following and then try to connect and see what you get
> in
> > >
> > > the
> > >
> > > > > log
> > > > >
> > > > > > >> when
> > > > > > >> you run the View XWB Log option.
> > > > > > >>
> > > > > > >>
> > > > > > >>
> > > > > > >> GTM>S DUZ=1 D ^XUP
> > > > > > >>
> > > > > > >> Setting up programmer environment
> > > > > > >> This is a TEST account.
> > > > > > >>
> > > > > > >> Terminal Type set to: C-VT220
> > > > > > >>
> > > > > > >> Select OPTION NAME: eve
> > > > > > >>
> > > > > > >> 1 EVE Systems Manager Menu
> > > > > > >> 2 EVENT CAPTURE ECX ECS MAINTENANCE Event Capture
> > > > > > >> 3 EVENT CAPTURE (ECS) EXTRACT AU ECX ECS SOURCE AUDIT
> > > > > > >> Event
> > > > > > >>
> > > > > > >> Capture
> > > > > > >> (ECS) Extract Audit
> > > > > > >>
> > > > > > >> 4 EVENT CAPTURE DATA ENTRY ECENTER Event Capture
> Data
> > > > > > >> Entry 5 EVENT CAPTURE EXTRACT ECXEC Event Capture
> > > > > > >> Extract
> > > > > > >>
> > > > > > >> Press <RETURN> to see more, '^' to exit this list, OR
> > > > > > >> CHOOSE 1-5: 1 EVE Systems Manager Menu
> > > > > > >>
> > > > > > >> Core Applications ...
> > > > > > >> Device Management ...
> > > > > > >> Menu Management ...
> > > > > > >> Programmer Options ...
> > > > > > >> Operations Management ...
> > > > > > >> Spool Management ...
> > > > > > >> Information Security Officer Menu ...
> > > > > > >> Taskman Management ...
> > > > > > >> User Management ...
> > > > > > >> Application Utilities ...
> > > > > > >> Capacity Planning ...
> > > > > > >> HL7 Main Menu ...
> > > > > > >>
> > > > > > >> You have PENDING ALERTS
> > > > > > >>
> > > > > > >> Enter "VA to jump to VIEW ALERTS option
> > > > > > >>
> > > > > > >> Select Systems Manager Menu Option: operations Management
> > > > > > >>
> > > > > > >> System Status
> > > > > > >> Introductory text edit
> > > > > > >> CPU/Service/User/Device Stats
> > > > > > >>
> > > > > > >> RJD Kill off a users' job
> > > > > > >>
> > > > > > >> Alert Management ...
> > > > > > >> Alpha/Beta Test Option Usage Menu ...
> > > > > > >> Clean old Job Nodes in XUTL
> > > > > > >> Delete Old (>14 d) Alerts
> > > > > > >> Foundations Management
> > > > > > >> Kernel Management Menu ...
> > > > > > >> Post sign-in Text Edit
> > > > > > >> RPC Broker Management Menu ...
> > > > > > >> User Management Menu ...
> > > > > > >>
> > > > > > >> You have PENDING ALERTS
> > > > > > >>
> > > > > > >> Enter "VA to jump to VIEW ALERTS option
> > > > > > >>
> > > > > > >> Select Operations Management Option: rpc Broker Management
> Menu
> > > > > > >>
> > > > > > >> RPC Listener Edit
> > > > > > >> Start All RPC Broker Listeners
> > > > > > >> Stop All RPC Broker Listeners
> > > > > > >> Clear XWB Log Files
> > > > > > >> Debug Parameter Edit
> > > > > > >> View XWB Log
> > > > > > >>
> > > > > > >> You have PENDING ALERTS
> > > > > > >>
> > > > > > >> Enter "VA to jump to VIEW ALERTS option
> > > > > > >>
> > > > > > >> Select RPC Broker Management Menu Option: debug Parameter Edit
> > > > > > >>
> > > > > > >>
> > > > > > >>
> > > > > > >> ----- Setting RPCBroker debug logging for System:
> > > > > > >> FOIA.PLATINUM.VA.GOV----- Enable Broker Logging: 3 very
> Verbose
> > > > > > >>
> > > > > > >> RPC Listener Edit
> > > > > > >> Start All RPC Broker Listeners
> > > > > > >> Stop All RPC Broker Listeners
> > > > > > >> Clear XWB Log Files
> > > > > > >> Debug Parameter Edit
> > > > > > >> View XWB Log
> > > > > > >>
> > > > > > >> You have PENDING ALERTS
> > > > > > >>
> > > > > > >> Enter "VA to jump to VIEW ALERTS option
> > > > > > >>
> > > > > > >> Select RPC Broker Management Menu Option:
> > > > > > >>
> > > > > > >> --
> > > > > > >> Nancy Anthracite
> > > > > > >>
> > > > > > >> On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > > > > > >> > Nancy,
> > > > > > >> > I see following;
> > > > > > >> >
> > > > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> > >
> > > (user-defined
> > >
> > > > > > >> > error trap)
> > > > > > >> > At M source location BREAD+15^XWBRW
> > > > > > >> > Wed Feb 22 05:29:38 GMT 2012
> > > > > > >> > LANG=en_US.UTF-8
> > > > > > >> > LC_CTYPE="en_US.UTF-8"
> > > > > > >> > LC_NUMERIC="en_US.UTF-8"
> > > > > > >> > LC_TIME="en_US.UTF-8"
> > > > > > >> > LC_COLLATE="en_US.UTF-8"
> > > > > > >> > LC_MONETARY="en_US.UTF-8"
> > > > > > >> > LC_MESSAGES="en_US.UTF-8"
> > > > > > >> > LC_PAPER="en_US.UTF-8"
> > > > > > >> > LC_NAME="en_US.UTF-8"
> > > > > > >> > LC_ADDRESS="en_US.UTF-8"
> > > > > > >> > LC_TELEPHONE="en_US.UTF-8"
> > > > > > >> > LC_MEASUREMENT="en_US.UTF-8"
> > > > > > >> > LC_IDENTIFICATION="en_US.UTF-8"
> > > > > > >> > LC_ALL=en_US.UTF-8
> > > > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> > >
> > > (user-defined
> > >
> > > > > > >> > error trap)
> > > > > > >> > At M source location BREAD+15^XWBRW
> > > > > > >> > Wed Feb 22 05:29:43 GMT 2012
> > > > > > >> > LANG=en_US.UTF-8
> > > > > > >> > LC_CTYPE="en_US.UTF-8"
> > > > > > >> > LC_NUMERIC="en_US.UTF-8"
> > > > > > >> > LC_TIME="en_US.UTF-8"
> > > > > > >> > LC_COLLATE="en_US.UTF-8"
> > > > > > >> > LC_MONETARY="en_US.UTF-8"
> > > > > > >> > LC_MESSAGES="en_US.UTF-8"
> > > > > > >> > LC_PAPER="en_US.UTF-8"
> > > > > > >> > LC_NAME="en_US.UTF-8"
> > > > > > >> > LC_ADDRESS="en_US.UTF-8"
> > > > > > >> > LC_TELEPHONE="en_US.UTF-8"
> > > > > > >> > LC_MEASUREMENT="en_US.UTF-8"
> > > > > > >> > LC_IDENTIFICATION="en_US.UTF-8"
> > > > > > >> > LC_ALL=en_US.UTF-8
> > > > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> > >
> > > (user-defined
> > >
> > > > > > >> > error trap)
> > > > > > >> > At M source location BREAD+15^XWBRW
> > > > > > >> >
> > > > > > >> > On Tue, Feb 21, 2012 at 10:36 PM, Nancy Anthracite <
> > > > > > >> >
> > > > > > >> > nanthracite@earthlink.net> wrote:
> > > > > > >> > > If that 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log is
> > > > >
> > > > > actually
> > > > >
> > > > > > >> > > on the same line as the line above it in the email, what
> are
> > >
> > > you
> > >
> > > > > > >> > > seeing
> > > > > > >>
> > > > > > >> in
> > > > > > >>
> > > > > > >> > > /home/ecloud/Downloads/VistA/log/EHR-gui.log?
> > > > > > >> > >
> > > > > > >> > > --
> > > > > > >> > > Nancy Anthracite
> > > > > > >> > >
> > > > > > >> > > On Tuesday, February 21, 2012, you wrote:
> > > > > > >> > > > Nancy,
> > > > > > >> > > >
> > > > > > >> > > > Here you go. The locale information is being placed into
> > > > > > >> > > > the
> > > > > > >>
> > > > > > >> EHR-gui to
> > > > > > >>
> > > > > > >> > > > make sure it should be taken as somehow GT.M was
> ignoring
> > > > > > >> > > > UTF-8
> > >
> > >
> ------------------------------------------------------------------------
> > >
> > > > > > >> -
> > > > > > >>
> > > > > > >> > > --
> > > > > > >> > >
> > > > > > >> > > > --------------------------------------- #!/bin/bash
> > > > > > >> > > > #EHR-gui: This is a file to run RPCBroker as a Linux
> > > > > > >> > > > service #make sure of our directory
> > > > > > >> > > > cd /home/ecloud/Downloads/VistA
> > > > > > >> > > > date >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
> > > > > > >> > > > #Get the GTM profile
> > > > > > >> > > > source /etc/profile.d/gtmprofile.sh
> > > > > > >> > > > #set locale
> > > > > > >> > > > export LANG=en_US.UTF-8
> > > > > > >> > > > export LC_CTYPE=en_US.UTF-8
> > > > > > >> > > > export LC_NUMERIC="en_US.UTF-8"
> > > > > > >> > > > export LC_TIME="en_US.UTF-8"
> > > > > > >> > > > export LC_COLLATE="en_US.UTF-8"
> > > > > > >> > > > export LC_MONETARY="en_US.UTF-8"
> > > > > > >> > > > export LC_MESSAGES="en_US.UTF-8"
> > > > > > >> > > > export LC_PAPER="en_US.UTF-8"
> > > > > > >> > > > export LC_NAME="en_US.UTF-8"
> > > > > > >> > > > export LC_ADDRESS="en_US.UTF-8"
> > > > > > >> > > > export LC_TELEPHONE="en_US.UTF-8"
> > > > > > >> > > > export LC_MEASUREMENT="en_US.UTF-8"
> > > > > > >> > > > export LC_IDENTIFICATION="en_US.UTF-8"
> > > > > > >> > > > export LC_ALL=en_US.UTF-8
> > > > > > >> > > > locale >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
> > > > > > >> > > > #Run routine
> > > > > > >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
> > > > > > >> > > > 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log
> > >
> > >
> ------------------------------------------------------------------------
> > >
> > > > > > >> -
> > > > > > >>
> > > > > > >> > > --
> > > > > > >> > >
> > > > > > >> > > > ----------------------------------
> > > > > > >> > > >
> > > > > > >> > > > When I run from command line
> > > > > > >> > > >
> > > > > > >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
> > > > > > >> > > > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> > > > >
> > > > > (user-defined
> > > > >
> > > > > > >> error
> > > > > > >>
> > > > > > >> > > > trap)
> > > > > > >> > > > At M source location BREAD+15^XWBRW
> > > > > > >> > > >
> > > > > > >> > > > UTF8>
> > > > > > >> > > >
> > > > > > >> > > >
> > > > > > >> > > >
> > > > > > >> > > >
> > > > > > >> > > > -Jignesh
> > > > > > >> > > >
> > > > > > >> > > > On Tue, Feb 21, 2012 at 7:33 PM, Nancy Anthracite
> > > > > > >> > > > <nanthracite@earthlink.net
> > > > > > >> > > >
> > > > > > >> > > > > wrote:
> > > > > > >> > > > >
> > > > > > >> > > > > Now show me the contents of the file
> > > > > > >> > >
> > > > > > >> > > /home/ecloud/Downloads/VistA/EHR-gui
> > > > > > >> > >
> > > > > > >> > > > > --
> > > > > > >> > > > > Nancy Anthracite
> > > > > > >> > > > >
> > > > > > >> > > > > On Tuesday, February 21, 2012, Jignesh Patel wrote:
> > > > > > >> > > > > > Nancy are you talking about this file.
> > > > > > >> > > > > > [ecloud@s1-iCare-VistA1 xinetd.d]$ cat EHR-gui
> > > > > > >> > > > > > service EHR-gui
> > > > > > >> > > > > >
> > > > > > >> > > > > > {
> > > > > > >> > > > > > port = 9230
> > > > > > >> > > > > > socket_type = stream
> > > > > > >> > > > > > protocol = tcp
> > > > > > >> > > > > > user = ecloud
> > > > > > >> > > > > > server =
> /home/ecloud/Downloads/VistA/EHR-gui
> > > > > > >> > > > > > type = UNLISTED
> > > > > > >> > > > > > wait = no
> > > > > > >> > > > > > disable = no
> > > > > > >> > > > > > }
> > > > > > >> > > > > >
> > > > > > >> > > > > > On Mon, Feb 20, 2012 at 5:37 PM, Nancy Anthracite
> > > > > > >> > > > > > <nanthracite@earthlink.net
> > > > > > >> > > > > >
> > > > > > >> > > > > > > wrote:
> > > > > > >> > > > > > >
> > > > > > >> > > > > > > Look at the log file for the xinetd connection
> which
> > >
> > > is
> > >
> > > > > > >> probably
> > > > > > >>
> > > > > > >> > > > > defined
> > > > > > >> > > > >
> > > > > > >> > > > > > > in the "server" code in the xinetd connection file
> > > > > > >> > > > > > > in
> > > > > > >> > >
> > > > > > >> > > /etc/xinetd.d/
> > > > > > >> > >
> > > > > > >> > > > > > > --
> > > > > > >> > > > > > > Nancy Anthracite
> > > > > > >> > > > > > >
> > > > > > >> > > > > > > On Monday, February 20, 2012, Jignesh Patel wrote:
> > > > > > >> > > > > > > > While running Xinetd on FOIA-VistA on gtm we got
> > > > >
> > > > > following
> > > > >
> > > > > > >> > > > > > > > error.
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > > "Non-empty value assigned to $ECODE
> (user-defined
> > > > > > >> > > > > > > > error
> > > > > > >>
> > > > > > >> trap)
> > > > > > >>
> > > > > > >> > > > > > > > At
> > > > > > >> > >
> > > > > > >> > > M
> > > > > > >> > >
> > > > > > >> > > > > > > > source location BREAD+15^XWBRW"
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > > Does anybody encounter the same error?
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > > -Jignesh
>
>

like0

error while executing CPRS

Nancy Anthracite's picture

Well, not too bad anyway. Let's kill off FOI:FOIISCSVR, but first show me a
Fileman inquire on the RPC Broker site parameters file and then D ^%G and list
%ZOSF for me.

--
Nancy Anthracite

On Wednesday, February 22, 2012, Jignesh Patel wrote:
> Here is out of D ^ZTMON
>
> Checking Taskman. Current $H=62509,61341 (Feb 22, 2012@17:02:21)
> RUN NODE=62509,61332 (Feb 22, 2012@17:02:12)
> Taskman is current..
> Checking the Status List:
> Node weight status time $J
> ROU:s1-iCare-VistA1 RUN T@17:02:12 26684 Main Loop
>
> Checking the Schedule List:
> Taskman has no tasks scheduled.
>
> Checking the IO Lists: Last TM scan: 2 sec,
> There are no tasks waiting for devices.
>
> Checking the Job List:
> There are no tasks waiting for partitions.
>
> Checking the Task List:
> There are no tasks currently running.
> Checking Sub-Managers:
> On node FOI:FOIISCSVR there are no free Sub-Manager(s). Status: Run
> On node ROU:s1-iCare-VistA1 there are 4 free Sub-Manager(s). Status:
> Run
>
> Enter monitor action: UPDATE//
>
>
> Also when I tried to check Volume it shows me
> Select VOLUME SET: ?
> Answer with VOLUME SET:
> FOI
>
>
> You may enter a new VOLUME SET, if you wish
> Answer must be 3-30 characters in length.
>
> However my Volume is ROU.
>
> And
> UTF8>D GETENV^%ZOSV W Y
> VAH^ROU^s1-iCare-VistA1^ROU:s1-iCare-VistA1
>
>
> On Wed, Feb 22, 2012 at 11:52 AM, Nancy Anthracite <
>
> nanthracite@earthlink.net> wrote:
> > From the " ,ROU", I am not sure it is right. Show me what you get with
> > D ^ZTMON.
> >
> > --
> > Nancy Anthracite
> >
> > On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > > Nancy,
> > > I did run ZTMGRSET and ZUSET but not DINIT.
> > >
> > > -Jignesh
> > >
> > > On Wed, Feb 22, 2012 at 11:46 AM, Nancy Anthracite <
> > >
> > > nanthracite@earthlink.net> wrote:
> > > > Did you run ^ZTMGRSET and ^DINIT and ^ZUSET and set up the Taskman
> > > > site parameters and all of your devices, etc?
> > > >
> > > > --
> > > > Nancy Anthracite
> > > >
> > > > On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > > > > May be because I don't have task man running. See below:
> > > > >
> > > > > I tried to check TASKMAN and found
> > > > >
> > > > > Operating System: GT.M (Unix)
> > > > > Volume Set: ROU
> > > > > Cpu-volume Pair: ROU:s1-iCare-VistA1
> > > > > TaskMan Files UCI and Volume Set: ,ROU
> > > > >
> > > > > Seems there is no UCI setup. Is that a problem?
> > > > >
> > > > >
> > > > > And My task man is not running
> > > > > hecking Taskman. Current $H=62509,59871 (Feb 22, 2012@16:37:51)
> > > > >
> > > > > RUN NODE=<Undefined>
> > > > >
> > > > > Taskman is shutting down not running..
> > > > >
> > > > > Checking the Status List:
> > > > > Node weight status time $J
> > > > >
> > > > > The Status List is empty.
> > > > >
> > > > > Checking the Schedule List:
> > > > > Taskman has no tasks scheduled.
> > > > >
> > > > > Checking the IO Lists: Last TM scan: 172947 sec,
> > > > >
> > > > > There are no tasks waiting for devices.
> > > > >
> > > > > Checking the Job List:
> > > > > There are no tasks waiting for partitions.
> > > > >
> > > > > Checking the Task List:
> > > > > There are no tasks currently running.
> > > > >
> > > > > Checking Sub-Managers:
> > > > > On node FOI:FOIISCSVR there are no free Sub-Manager(s).
> > > > > Status: Stop On node ROU:s1-iCare-VistA1 there are no free
> > > > > Sub-Manager(s).
> > > >
> > > > Status:
> > > > > Stop
> > > > >
> > > > > On Wed, Feb 22, 2012 at 11:29 AM, Nancy Anthracite <
> > > > >
> > > > > nanthracite@earthlink.net> wrote:
> > > > > > That log is usually a pretty verbose log and you are apparently
> > > > > > not
> > > >
> > > > even
> > > >
> > > > > > getting much past square one. It has very little to say. Did you
> > > > > > pick the very verbose option, #3?
> > > > > >
> > > > > > Do be sure you have a null device set up correctly as that is a
> > > > > > common reason
> > > > > > for a crash and burn, but it usually gives a a different error.
> > > > > > --
> > > > > > Nancy Anthracite
> > > > > >
> > > > > > On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > > > > > > I see following in the log
> > > > > > >
> > > > > > > Log from Job 30930 2 Lines
> > > > > > > 15:57:38 = Log start: Feb 22, 2012@15:57:38
> > > > > > > 15:57:38 = XWBTCPM
> > > > > > >
> > > > > > > Log from Job 31002 2 Lines
> > > > > > > 15:57:48 = Log start: Feb 22, 2012@15:57:48
> > > > > > > 15:57:48 = XWBTCPM
> > > > > > >
> > > > > > > Log from Job 31038 2 Lines
> > > > > > > 15:57:53 = Log start: Feb 22, 2012@15:57:53
> > > > > > > 15:57:53 = XWBTCPM
> > > > > > >
> > > > > > > On Wed, Feb 22, 2012 at 10:55 AM, Jignesh Patel
> > > > > >
> > > > > > <jigneshmpatel@gmail.com>wrote:
> > > > > > > > Nancy.
> > > > > > > > Sorry I slept let yesterday. I have implemented the step you
> >
> > did
> >
> > > > > > > > mention.I have enabled RPC broker debug.
> > > > > > > >
> > > > > > > > Now what I need to do?
> > > > > > > >
> > > > > > > >
> > > > > > > > On Wed, Feb 22, 2012 at 6:55 AM, Nancy Anthracite <
> > > > > > > >
> > > > > > > > nanthracite@earthlink.net> wrote:
> > > > > > > >> Well, I understand there is a bug in the code so the error
> >
> > trap
> >
> > > > does
> > > >
> > > > > > not
> > > > > >
> > > > > > > >> work
> > > > > > > >> right so it is hard to know.
> > > > > > > >>
> > > > > > > >> I have done a port of the FOIA from 12-6-11 and CPRS is
> > > > > > > >> connecting OK
> > > > > >
> > > > > > so
> > > > > >
> > > > > > > >> I don't know what to say until the error trap is working,
> > > > > > > >> and then it will probably take someone else to say.
> > > > > > > >>
> > > > > > > >> But, we might glean something from the debugger for the
> >
> > broker.
> >
> > > > > > > >> Do the following and then try to connect and see what you
> > > > > > > >> get
> >
> > in
> >
> > > > the
> > > >
> > > > > > log
> > > > > >
> > > > > > > >> when
> > > > > > > >> you run the View XWB Log option.
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> GTM>S DUZ=1 D ^XUP
> > > > > > > >>
> > > > > > > >> Setting up programmer environment
> > > > > > > >> This is a TEST account.
> > > > > > > >>
> > > > > > > >> Terminal Type set to: C-VT220
> > > > > > > >>
> > > > > > > >> Select OPTION NAME: eve
> > > > > > > >>
> > > > > > > >> 1 EVE Systems Manager Menu
> > > > > > > >> 2 EVENT CAPTURE ECX ECS MAINTENANCE Event Capture
> > > > > > > >> 3 EVENT CAPTURE (ECS) EXTRACT AU ECX ECS SOURCE AUDIT
> > > > > > > >> Event
> > > > > > > >>
> > > > > > > >> Capture
> > > > > > > >> (ECS) Extract Audit
> > > > > > > >>
> > > > > > > >> 4 EVENT CAPTURE DATA ENTRY ECENTER Event Capture
> >
> > Data
> >
> > > > > > > >> Entry 5 EVENT CAPTURE EXTRACT ECXEC Event Capture
> > > > > > > >> Extract
> > > > > > > >>
> > > > > > > >> Press <RETURN> to see more, '^' to exit this list, OR
> > > > > > > >> CHOOSE 1-5: 1 EVE Systems Manager Menu
> > > > > > > >>
> > > > > > > >> Core Applications ...
> > > > > > > >> Device Management ...
> > > > > > > >> Menu Management ...
> > > > > > > >> Programmer Options ...
> > > > > > > >> Operations Management ...
> > > > > > > >> Spool Management ...
> > > > > > > >> Information Security Officer Menu ...
> > > > > > > >> Taskman Management ...
> > > > > > > >> User Management ...
> > > > > > > >> Application Utilities ...
> > > > > > > >> Capacity Planning ...
> > > > > > > >> HL7 Main Menu ...
> > > > > > > >>
> > > > > > > >> You have PENDING ALERTS
> > > > > > > >>
> > > > > > > >> Enter "VA to jump to VIEW ALERTS option
> > > > > > > >>
> > > > > > > >> Select Systems Manager Menu Option: operations Management
> > > > > > > >>
> > > > > > > >> System Status
> > > > > > > >> Introductory text edit
> > > > > > > >> CPU/Service/User/Device Stats
> > > > > > > >>
> > > > > > > >> RJD Kill off a users' job
> > > > > > > >>
> > > > > > > >> Alert Management ...
> > > > > > > >> Alpha/Beta Test Option Usage Menu ...
> > > > > > > >> Clean old Job Nodes in XUTL
> > > > > > > >> Delete Old (>14 d) Alerts
> > > > > > > >> Foundations Management
> > > > > > > >> Kernel Management Menu ...
> > > > > > > >> Post sign-in Text Edit
> > > > > > > >> RPC Broker Management Menu ...
> > > > > > > >> User Management Menu ...
> > > > > > > >>
> > > > > > > >> You have PENDING ALERTS
> > > > > > > >>
> > > > > > > >> Enter "VA to jump to VIEW ALERTS option
> > > > > > > >>
> > > > > > > >> Select Operations Management Option: rpc Broker Management
> >
> > Menu
> >
> > > > > > > >> RPC Listener Edit
> > > > > > > >> Start All RPC Broker Listeners
> > > > > > > >> Stop All RPC Broker Listeners
> > > > > > > >> Clear XWB Log Files
> > > > > > > >> Debug Parameter Edit
> > > > > > > >> View XWB Log
> > > > > > > >>
> > > > > > > >> You have PENDING ALERTS
> > > > > > > >>
> > > > > > > >> Enter "VA to jump to VIEW ALERTS option
> > > > > > > >>
> > > > > > > >> Select RPC Broker Management Menu Option: debug Parameter
> > > > > > > >> Edit
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> ----- Setting RPCBroker debug logging for System:
> > > > > > > >> FOIA.PLATINUM.VA.GOV----- Enable Broker Logging: 3 very
> >
> > Verbose
> >
> > > > > > > >> RPC Listener Edit
> > > > > > > >> Start All RPC Broker Listeners
> > > > > > > >> Stop All RPC Broker Listeners
> > > > > > > >> Clear XWB Log Files
> > > > > > > >> Debug Parameter Edit
> > > > > > > >> View XWB Log
> > > > > > > >>
> > > > > > > >> You have PENDING ALERTS
> > > > > > > >>
> > > > > > > >> Enter "VA to jump to VIEW ALERTS option
> > > > > > > >>
> > > > > > > >> Select RPC Broker Management Menu Option:
> > > > > > > >>
> > > > > > > >> --
> > > > > > > >> Nancy Anthracite
> > > > > > > >>
> > > > > > > >> On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > > > > > > >> > Nancy,
> > > > > > > >> > I see following;
> > > > > > > >> >
> > > > > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> > > >
> > > > (user-defined
> > > >
> > > > > > > >> > error trap)
> > > > > > > >> > At M source location BREAD+15^XWBRW
> > > > > > > >> > Wed Feb 22 05:29:38 GMT 2012
> > > > > > > >> > LANG=en_US.UTF-8
> > > > > > > >> > LC_CTYPE="en_US.UTF-8"
> > > > > > > >> > LC_NUMERIC="en_US.UTF-8"
> > > > > > > >> > LC_TIME="en_US.UTF-8"
> > > > > > > >> > LC_COLLATE="en_US.UTF-8"
> > > > > > > >> > LC_MONETARY="en_US.UTF-8"
> > > > > > > >> > LC_MESSAGES="en_US.UTF-8"
> > > > > > > >> > LC_PAPER="en_US.UTF-8"
> > > > > > > >> > LC_NAME="en_US.UTF-8"
> > > > > > > >> > LC_ADDRESS="en_US.UTF-8"
> > > > > > > >> > LC_TELEPHONE="en_US.UTF-8"
> > > > > > > >> > LC_MEASUREMENT="en_US.UTF-8"
> > > > > > > >> > LC_IDENTIFICATION="en_US.UTF-8"
> > > > > > > >> > LC_ALL=en_US.UTF-8
> > > > > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> > > >
> > > > (user-defined
> > > >
> > > > > > > >> > error trap)
> > > > > > > >> > At M source location BREAD+15^XWBRW
> > > > > > > >> > Wed Feb 22 05:29:43 GMT 2012
> > > > > > > >> > LANG=en_US.UTF-8
> > > > > > > >> > LC_CTYPE="en_US.UTF-8"
> > > > > > > >> > LC_NUMERIC="en_US.UTF-8"
> > > > > > > >> > LC_TIME="en_US.UTF-8"
> > > > > > > >> > LC_COLLATE="en_US.UTF-8"
> > > > > > > >> > LC_MONETARY="en_US.UTF-8"
> > > > > > > >> > LC_MESSAGES="en_US.UTF-8"
> > > > > > > >> > LC_PAPER="en_US.UTF-8"
> > > > > > > >> > LC_NAME="en_US.UTF-8"
> > > > > > > >> > LC_ADDRESS="en_US.UTF-8"
> > > > > > > >> > LC_TELEPHONE="en_US.UTF-8"
> > > > > > > >> > LC_MEASUREMENT="en_US.UTF-8"
> > > > > > > >> > LC_IDENTIFICATION="en_US.UTF-8"
> > > > > > > >> > LC_ALL=en_US.UTF-8
> > > > > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> > > >
> > > > (user-defined
> > > >
> > > > > > > >> > error trap)
> > > > > > > >> > At M source location BREAD+15^XWBRW
> > > > > > > >> >
> > > > > > > >> > On Tue, Feb 21, 2012 at 10:36 PM, Nancy Anthracite <
> > > > > > > >> >
> > > > > > > >> > nanthracite@earthlink.net> wrote:
> > > > > > > >> > > If that 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log
> > > > > > > >> > > is
> > > > > >
> > > > > > actually
> > > > > >
> > > > > > > >> > > on the same line as the line above it in the email, what
> >
> > are
> >
> > > > you
> > > >
> > > > > > > >> > > seeing
> > > > > > > >>
> > > > > > > >> in
> > > > > > > >>
> > > > > > > >> > > /home/ecloud/Downloads/VistA/log/EHR-gui.log?
> > > > > > > >> > >
> > > > > > > >> > > --
> > > > > > > >> > > Nancy Anthracite
> > > > > > > >> > >
> > > > > > > >> > > On Tuesday, February 21, 2012, you wrote:
> > > > > > > >> > > > Nancy,
> > > > > > > >> > > >
> > > > > > > >> > > > Here you go. The locale information is being placed
> > > > > > > >> > > > into the
> > > > > > > >>
> > > > > > > >> EHR-gui to
> > > > > > > >>
> > > > > > > >> > > > make sure it should be taken as somehow GT.M was
> >
> > ignoring
> >
> > > > > > > >> > > > UTF-8
> >
> > ------------------------------------------------------------------------
> >
> > > > > > > >> -
> > > > > > > >>
> > > > > > > >> > > --
> > > > > > > >> > >
> > > > > > > >> > > > --------------------------------------- #!/bin/bash
> > > > > > > >> > > > #EHR-gui: This is a file to run RPCBroker as a Linux
> > > > > > > >> > > > service #make sure of our directory
> > > > > > > >> > > > cd /home/ecloud/Downloads/VistA
> > > > > > > >> > > > date >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
> > > > > > > >> > > > #Get the GTM profile
> > > > > > > >> > > > source /etc/profile.d/gtmprofile.sh
> > > > > > > >> > > > #set locale
> > > > > > > >> > > > export LANG=en_US.UTF-8
> > > > > > > >> > > > export LC_CTYPE=en_US.UTF-8
> > > > > > > >> > > > export LC_NUMERIC="en_US.UTF-8"
> > > > > > > >> > > > export LC_TIME="en_US.UTF-8"
> > > > > > > >> > > > export LC_COLLATE="en_US.UTF-8"
> > > > > > > >> > > > export LC_MONETARY="en_US.UTF-8"
> > > > > > > >> > > > export LC_MESSAGES="en_US.UTF-8"
> > > > > > > >> > > > export LC_PAPER="en_US.UTF-8"
> > > > > > > >> > > > export LC_NAME="en_US.UTF-8"
> > > > > > > >> > > > export LC_ADDRESS="en_US.UTF-8"
> > > > > > > >> > > > export LC_TELEPHONE="en_US.UTF-8"
> > > > > > > >> > > > export LC_MEASUREMENT="en_US.UTF-8"
> > > > > > > >> > > > export LC_IDENTIFICATION="en_US.UTF-8"
> > > > > > > >> > > > export LC_ALL=en_US.UTF-8
> > > > > > > >> > > > locale >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
> > > > > > > >> > > > #Run routine
> > > > > > > >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
> > > > > > > >> > > > 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log
> >
> > ------------------------------------------------------------------------
> >
> > > > > > > >> -
> > > > > > > >>
> > > > > > > >> > > --
> > > > > > > >> > >
> > > > > > > >> > > > ----------------------------------
> > > > > > > >> > > >
> > > > > > > >> > > > When I run from command line
> > > > > > > >> > > >
> > > > > > > >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
> > > > > > > >> > > > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> > > > > >
> > > > > > (user-defined
> > > > > >
> > > > > > > >> error
> > > > > > > >>
> > > > > > > >> > > > trap)
> > > > > > > >> > > > At M source location BREAD+15^XWBRW
> > > > > > > >> > > >
> > > > > > > >> > > > UTF8>
> > > > > > > >> > > >
> > > > > > > >> > > >
> > > > > > > >> > > >
> > > > > > > >> > > >
> > > > > > > >> > > > -Jignesh
> > > > > > > >> > > >
> > > > > > > >> > > > On Tue, Feb 21, 2012 at 7:33 PM, Nancy Anthracite
> > > > > > > >> > > > <nanthracite@earthlink.net
> > > > > > > >> > > >
> > > > > > > >> > > > > wrote:
> > > > > > > >> > > > >
> > > > > > > >> > > > > Now show me the contents of the file
> > > > > > > >> > >
> > > > > > > >> > > /home/ecloud/Downloads/VistA/EHR-gui
> > > > > > > >> > >
> > > > > > > >> > > > > --
> > > > > > > >> > > > > Nancy Anthracite
> > > > > > > >> > > > >
> > > > > > > >> > > > > On Tuesday, February 21, 2012, Jignesh Patel wrote:
> > > > > > > >> > > > > > Nancy are you talking about this file.
> > > > > > > >> > > > > > [ecloud@s1-iCare-VistA1 xinetd.d]$ cat EHR-gui
> > > > > > > >> > > > > > service EHR-gui
> > > > > > > >> > > > > >
> > > > > > > >> > > > > > {
> > > > > > > >> > > > > > port = 9230
> > > > > > > >> > > > > > socket_type = stream
> > > > > > > >> > > > > > protocol = tcp
> > > > > > > >> > > > > > user = ecloud
> > > > > > > >> > > > > > server =
> >
> > /home/ecloud/Downloads/VistA/EHR-gui
> >
> > > > > > > >> > > > > > type = UNLISTED
> > > > > > > >> > > > > > wait = no
> > > > > > > >> > > > > > disable = no
> > > > > > > >> > > > > > }
> > > > > > > >> > > > > >
> > > > > > > >> > > > > > On Mon, Feb 20, 2012 at 5:37 PM, Nancy Anthracite
> > > > > > > >> > > > > > <nanthracite@earthlink.net
> > > > > > > >> > > > > >
> > > > > > > >> > > > > > > wrote:
> > > > > > > >> > > > > > >
> > > > > > > >> > > > > > > Look at the log file for the xinetd connection
> >
> > which
> >
> > > > is
> > > >
> > > > > > > >> probably
> > > > > > > >>
> > > > > > > >> > > > > defined
> > > > > > > >> > > > >
> > > > > > > >> > > > > > > in the "server" code in the xinetd connection
> > > > > > > >> > > > > > > file in
> > > > > > > >> > >
> > > > > > > >> > > /etc/xinetd.d/
> > > > > > > >> > >
> > > > > > > >> > > > > > > --
> > > > > > > >> > > > > > > Nancy Anthracite
> > > > > > > >> > > > > > >
> > > > > > > >> > > > > > > On Monday, February 20, 2012, Jignesh Patel
wrote:
> > > > > > > >> > > > > > > > While running Xinetd on FOIA-VistA on gtm we
> > > > > > > >> > > > > > > > got
> > > > > >
> > > > > > following
> > > > > >
> > > > > > > >> > > > > > > > error.
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > > "Non-empty value assigned to $ECODE
> >
> > (user-defined
> >
> > > > > > > >> > > > > > > > error
> > > > > > > >>
> > > > > > > >> trap)
> > > > > > > >>
> > > > > > > >> > > > > > > > At
> > > > > > > >> > >
> > > > > > > >> > > M
> > > > > > > >> > >
> > > > > > > >> > > > > > > > source location BREAD+15^XWBRW"
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > > Does anybody encounter the same error?
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > > -Jignesh

like0

error while executing CPRS

Jignesh Patel's picture

Nancy,
Here you go
UTF8>D ^%G

Output device: <terminal>:

List ^%ZOSF
^%ZOSF("$INC")=0
^%ZOSF("ACTJ")="S Y=$$ACTJ^%ZOSV()"
^%ZOSF("AVJ")="S Y=$$AVJ^%ZOSV()"
^%ZOSF("BRK")="U $I:(CENABLE)"
^%ZOSF("DEL")="D DEL^%ZOSV2(X) ;N %RD,%OD S %RD=$P($S($ZR
O[""("":$P($P($ZRO,""("",2),"")""),1:$ZRO),"" "
")_""/"",%OD=$S($ZRO[""("":$P($ZRO,""("",1)_""/
"",1:%RD) ZSYSTEM ""rm -f ""_%RD_X_"".m"" ZSYST
EM ""rm -f ""_%OD_X_"".o"""
^%ZOSF("EOFF")="U $I:(NOECHO)"
^%ZOSF("EON")="U $I:(ECHO)"
^%ZOSF("EOT")="S Y=$ZA\1024#2 ; <====="
^%ZOSF("ERRTN")="^%ZTER"
^%ZOSF("ETRP")="Q"
^%ZOSF("GD")="G ^%GD"
^%ZOSF("JOBPARAM")="G JOBPAR^%ZOSV"
^%ZOSF("LABOFF")="U IO:(NOECHO) ; <====="
^%ZOSF("LOAD")="D LOAD^%ZOSV2(X) ;S %N=0 F XCNP=XCNP+1:1
S %N=%N+1,%=$T(+%N^@X) Q:$L(%)=0 S @(DIF_XCNP_
"",0)"")=%"
^%ZOSF("LPC")="S Y="""" ; <====="
^%ZOSF("MAGTAPE")="S %MT(""BS"")=""*1"",%MT(""FS"")=""*2"
",%MT(""WTM"")=""*3"",%MT(""WB"")=""*4"",%MT(""
REW"")=""*5"",%MT(""RB"")=""*6"",%MT(""REL"")="
"*7"",%MT(""WHL"")=""*8"",%MT(""WEL"")=""*9"" ;
<====="
^%ZOSF("MAXSIZ")="Q"
^%ZOSF("MGR")="VAH,ROU"
^%ZOSF("MTBOT")="S Y=$ZA\32#2 ; <====="
^%ZOSF("MTERR")="S Y=$ZA\32768#2 ; <====="
^%ZOSF("MTONLINE")="S Y=$ZA\64#2 ; <====="
^%ZOSF("MTWPROT")="S Y=$ZA\4#2 ; <====="
^%ZOSF("NBRK")="U $I:(NOCENABLE)"
^%ZOSF("NO-PASSALL")="U $I:(ESCAPE:TERMINATOR="""":NOPAST
HRU)"
^%ZOSF("NO-TYPE-AHEAD")="U $I:(NOTYPEAHEAD)"
^%ZOSF("OS")="GT.M (Unix)^19"
^%ZOSF("PASSALL")="U $I:(NOESCAPE:NOTERMINATOR:PASTHRU)"
^%ZOSF("PRIINQ")="S Y=$$PRIINQ^%ZOSV()"
^%ZOSF("PRIORITY")="Q ;G PRIORITY^%ZOSV"
^%ZOSF("PROD")="VAH,ROU"
^%ZOSF("PROGMODE")="S Y=$$PROGMODE^%ZOSV()"
^%ZOSF("RD")="G ^%RD"
^%ZOSF("RESJOB")="Q:'$D(DUZ) Q:'$D(^XUSEC(""XUMGR"",+DUZ
)) N XQZ S XQZ=""^FORCEX[MGR]"" D DO^%XUCI ; <
====="
^%ZOSF("RM")="U $I:WIDTH=$S(X<256:X,1:0)"
^%ZOSF("RSEL")="K ^UTILITY($J) D ^%RSEL S X="""" X ""F S
X=$O(%ZR(X)) Q:X="""""""" S ^UTILITY($J,X)=""
"""""""" K %ZR"
^%ZOSF("RSUM")="S Y=0 F %=1,3:1 S %1=$T(+%^@X),%3=$F(%1,"
" "") Q:'%3 S %3=$S($E(%1,%3)'="";"":$L(%1),$E
(%1,%3+1)="";"":$L(%1),1:%3-2) F %2=1:1:%3 S Y=
$A(%1,%2)*%2+Y"
^%ZOSF("RSUM1")="N %,%1,%2,%3 S Y=0 F %=1,3:1 S %1=$T(+%^
@X),%3=$F(%1,"" "") Q:'%3 S %3=$S($E(%1,%3)'="
";"":$L(%1),$E(%1,%3+1)="";"":$L(%1),1:%3-2) F
%2=1:1:%3 S Y=$A(%1,%2)*(%2+%)+Y"
^%ZOSF("SAVE")="D SAVE^%ZOSV2(X) ;N %I,%F S %I=$I,%F=$P($
S($ZRO[""("":$P($P($ZRO,""("",2),"")""),1:$ZRO)
,"" "")_""/""_X_"".m"" O %F:(NEWVERSION) U %F X
""F S XCN=$O(@(DIE_XCN_"""")"""")) Q:+XCN'=XC
N S %=@(DIE_XCN_"""",0)"""") Q:$E(%,1)=""""$""
"" I $E(%)'="""";"""" W %,!"" C %F U %I"
^%ZOSF("SIZE")="S Y=0 F I=1:1 S %=$T(+I) Q:%="""" S Y=Y+
$L(%)+2 ; <====="
^%ZOSF("SS")="D ^ZSY"
^%ZOSF("TEST")="I X]"""",$T(^@X)]"""""
^%ZOSF("TMK")="S Y=$ZA\16384#2"
^%ZOSF("TMP")="/tmp/"
^%ZOSF("TRAP")="$ZT=""G ""_X"
^%ZOSF("TRMOFF")="U $I:(TERMINATOR="""")"
^%ZOSF("TRMON")="U $I:(TERMINATOR=$C(0,1,2,3,4,5,6,7,8,9,
10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25
,26,27,28,29,30,31,127))"
^%ZOSF("TRMRD")="S Y=$A($ZB)"
^%ZOSF("TYPE-AHEAD")="U $I:(TYPEAHEAD)"
^%ZOSF("UCI")="S Y=^%ZOSF(""PROD"")"
^%ZOSF("UCICHECK")="S Y=1"
^%ZOSF("UPPERCASE")="S Y=$TR(X,""abcdefghijklmnopqrstuvwx
yz"",""ABCDEFGHIJKLMNOPQRSTUVWXYZ"")"
^%ZOSF("VOL")="ROU"
^%ZOSF("XY")="S $X=DX,$Y=DY ; <====="
^%ZOSF("ZD")="S Y=$$HTE^XLFDT(X,2) I $L($P(Y,""/""))=1 S
Y=0_

I have created another volume set as I was not seeing ROU. Now I want to
delete the Volume Set FOI how to do that? Or it doesn't matter.

Select VOLUME SET: ?
Answer with VOLUME SET
Choose from:
FOI
ROU

You may enter a new VOLUME SET, if you wish
Answer must be 3-30 characters in length.

Select VOLUME SET: ROU
VOLUME SET: ROU//
TYPE: GENERAL PURPOSE VOLUME SET//
INHIBIT LOGONS?: NO//
LINK ACCESS?: NO//
OUT OF SERVICE?: NO//
REQUIRED VOLUME SET?: NO//
TASKMAN FILES UCI: VAH//
TASKMAN FILES VOLUME SET: ROU//
REPLACEMENT VOLUME SET:
DAYS TO KEEP OLD TASKS: 4//
SIGNON/PRODUCTION VOLUME SET: Yes//
RE-QUEUES BEFORE UN-SCHEDULE: 12//

On Wed, Feb 22, 2012 at 12:13 PM, Nancy Anthracite <
nanthracite@earthlink.net> wrote:

> Well, not too bad anyway. Let's kill off FOI:FOIISCSVR, but first show me
> a
> Fileman inquire on the RPC Broker site parameters file and then D ^%G and
> list
> %ZOSF for me.
>
> --
> Nancy Anthracite
>
> On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > Here is out of D ^ZTMON
> >
> > Checking Taskman. Current $H=62509,61341 (Feb 22, 2012@17:02:21)
> > RUN NODE=62509,61332 (Feb 22, 2012@17:02:12)
> > Taskman is current..
> > Checking the Status List:
> > Node weight status time $J
> > ROU:s1-iCare-VistA1 RUN T@17:02:12 26684 Main Loop
> >
> > Checking the Schedule List:
> > Taskman has no tasks scheduled.
> >
> > Checking the IO Lists: Last TM scan: 2 sec,
> > There are no tasks waiting for devices.
> >
> > Checking the Job List:
> > There are no tasks waiting for partitions.
> >
> > Checking the Task List:
> > There are no tasks currently running.
> > Checking Sub-Managers:
> > On node FOI:FOIISCSVR there are no free Sub-Manager(s). Status: Run
> > On node ROU:s1-iCare-VistA1 there are 4 free Sub-Manager(s).
> Status:
> > Run
> >
> > Enter monitor action: UPDATE//
> >
> >
> > Also when I tried to check Volume it shows me
> > Select VOLUME SET: ?
> > Answer with VOLUME SET:
> > FOI
> >
> >
> > You may enter a new VOLUME SET, if you wish
> > Answer must be 3-30 characters in length.
> >
> > However my Volume is ROU.
> >
> > And
> > UTF8>D GETENV^%ZOSV W Y
> > VAH^ROU^s1-iCare-VistA1^ROU:s1-iCare-VistA1
> >
> >
> > On Wed, Feb 22, 2012 at 11:52 AM, Nancy Anthracite <
> >
> > nanthracite@earthlink.net> wrote:
> > > From the " ,ROU", I am not sure it is right. Show me what you get
> with
> > > D ^ZTMON.
> > >
> > > --
> > > Nancy Anthracite
> > >
> > > On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > > > Nancy,
> > > > I did run ZTMGRSET and ZUSET but not DINIT.
> > > >
> > > > -Jignesh
> > > >
> > > > On Wed, Feb 22, 2012 at 11:46 AM, Nancy Anthracite <
> > > >
> > > > nanthracite@earthlink.net> wrote:
> > > > > Did you run ^ZTMGRSET and ^DINIT and ^ZUSET and set up the Taskman
> > > > > site parameters and all of your devices, etc?
> > > > >
> > > > > --
> > > > > Nancy Anthracite
> > > > >
> > > > > On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > > > > > May be because I don't have task man running. See below:
> > > > > >
> > > > > > I tried to check TASKMAN and found
> > > > > >
> > > > > > Operating System: GT.M (Unix)
> > > > > > Volume Set: ROU
> > > > > > Cpu-volume Pair: ROU:s1-iCare-VistA1
> > > > > > TaskMan Files UCI and Volume Set: ,ROU
> > > > > >
> > > > > > Seems there is no UCI setup. Is that a problem?
> > > > > >
> > > > > >
> > > > > > And My task man is not running
> > > > > > hecking Taskman. Current $H=62509,59871 (Feb 22, 2012@16
> :37:51)
> > > > > >
> > > > > > RUN NODE=<Undefined>
> > > > > >
> > > > > > Taskman is shutting down not running..
> > > > > >
> > > > > > Checking the Status List:
> > > > > > Node weight status time $J
> > > > > >
> > > > > > The Status List is empty.
> > > > > >
> > > > > > Checking the Schedule List:
> > > > > > Taskman has no tasks scheduled.
> > > > > >
> > > > > > Checking the IO Lists: Last TM scan: 172947 sec,
> > > > > >
> > > > > > There are no tasks waiting for devices.
> > > > > >
> > > > > > Checking the Job List:
> > > > > > There are no tasks waiting for partitions.
> > > > > >
> > > > > > Checking the Task List:
> > > > > > There are no tasks currently running.
> > > > > >
> > > > > > Checking Sub-Managers:
> > > > > > On node FOI:FOIISCSVR there are no free Sub-Manager(s).
> > > > > > Status: Stop On node ROU:s1-iCare-VistA1 there are no free
> > > > > > Sub-Manager(s).
> > > > >
> > > > > Status:
> > > > > > Stop
> > > > > >
> > > > > > On Wed, Feb 22, 2012 at 11:29 AM, Nancy Anthracite <
> > > > > >
> > > > > > nanthracite@earthlink.net> wrote:
> > > > > > > That log is usually a pretty verbose log and you are apparently
> > > > > > > not
> > > > >
> > > > > even
> > > > >
> > > > > > > getting much past square one. It has very little to say. Did
> you
> > > > > > > pick the very verbose option, #3?
> > > > > > >
> > > > > > > Do be sure you have a null device set up correctly as that is a
> > > > > > > common reason
> > > > > > > for a crash and burn, but it usually gives a a different error.
> > > > > > > --
> > > > > > > Nancy Anthracite
> > > > > > >
> > > > > > > On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > > > > > > > I see following in the log
> > > > > > > >
> > > > > > > > Log from Job 30930 2 Lines
> > > > > > > > 15:57:38 = Log start: Feb 22, 2012@15:57:38
> > > > > > > > 15:57:38 = XWBTCPM
> > > > > > > >
> > > > > > > > Log from Job 31002 2 Lines
> > > > > > > > 15:57:48 = Log start: Feb 22, 2012@15:57:48
> > > > > > > > 15:57:48 = XWBTCPM
> > > > > > > >
> > > > > > > > Log from Job 31038 2 Lines
> > > > > > > > 15:57:53 = Log start: Feb 22, 2012@15:57:53
> > > > > > > > 15:57:53 = XWBTCPM
> > > > > > > >
> > > > > > > > On Wed, Feb 22, 2012 at 10:55 AM, Jignesh Patel
> > > > > > >
> > > > > > > <jigneshmpatel@gmail.com>wrote:
> > > > > > > > > Nancy.
> > > > > > > > > Sorry I slept let yesterday. I have implemented the step
> you
> > >
> > > did
> > >
> > > > > > > > > mention.I have enabled RPC broker debug.
> > > > > > > > >
> > > > > > > > > Now what I need to do?
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > On Wed, Feb 22, 2012 at 6:55 AM, Nancy Anthracite <
> > > > > > > > >
> > > > > > > > > nanthracite@earthlink.net> wrote:
> > > > > > > > >> Well, I understand there is a bug in the code so the error
> > >
> > > trap
> > >
> > > > > does
> > > > >
> > > > > > > not
> > > > > > >
> > > > > > > > >> work
> > > > > > > > >> right so it is hard to know.
> > > > > > > > >>
> > > > > > > > >> I have done a port of the FOIA from 12-6-11 and CPRS is
> > > > > > > > >> connecting OK
> > > > > > >
> > > > > > > so
> > > > > > >
> > > > > > > > >> I don't know what to say until the error trap is working,
> > > > > > > > >> and then it will probably take someone else to say.
> > > > > > > > >>
> > > > > > > > >> But, we might glean something from the debugger for the
> > >
> > > broker.
> > >
> > > > > > > > >> Do the following and then try to connect and see what you
> > > > > > > > >> get
> > >
> > > in
> > >
> > > > > the
> > > > >
> > > > > > > log
> > > > > > >
> > > > > > > > >> when
> > > > > > > > >> you run the View XWB Log option.
> > > > > > > > >>
> > > > > > > > >>
> > > > > > > > >>
> > > > > > > > >> GTM>S DUZ=1 D ^XUP
> > > > > > > > >>
> > > > > > > > >> Setting up programmer environment
> > > > > > > > >> This is a TEST account.
> > > > > > > > >>
> > > > > > > > >> Terminal Type set to: C-VT220
> > > > > > > > >>
> > > > > > > > >> Select OPTION NAME: eve
> > > > > > > > >>
> > > > > > > > >> 1 EVE Systems Manager Menu
> > > > > > > > >> 2 EVENT CAPTURE ECX ECS MAINTENANCE Event
> Capture
> > > > > > > > >> 3 EVENT CAPTURE (ECS) EXTRACT AU ECX ECS SOURCE
> AUDIT
> > > > > > > > >> Event
> > > > > > > > >>
> > > > > > > > >> Capture
> > > > > > > > >> (ECS) Extract Audit
> > > > > > > > >>
> > > > > > > > >> 4 EVENT CAPTURE DATA ENTRY ECENTER Event
> Capture
> > >
> > > Data
> > >
> > > > > > > > >> Entry 5 EVENT CAPTURE EXTRACT ECXEC Event
> Capture
> > > > > > > > >> Extract
> > > > > > > > >>
> > > > > > > > >> Press <RETURN> to see more, '^' to exit this list, OR
> > > > > > > > >> CHOOSE 1-5: 1 EVE Systems Manager Menu
> > > > > > > > >>
> > > > > > > > >> Core Applications ...
> > > > > > > > >> Device Management ...
> > > > > > > > >> Menu Management ...
> > > > > > > > >> Programmer Options ...
> > > > > > > > >> Operations Management ...
> > > > > > > > >> Spool Management ...
> > > > > > > > >> Information Security Officer Menu ...
> > > > > > > > >> Taskman Management ...
> > > > > > > > >> User Management ...
> > > > > > > > >> Application Utilities ...
> > > > > > > > >> Capacity Planning ...
> > > > > > > > >> HL7 Main Menu ...
> > > > > > > > >>
> > > > > > > > >> You have PENDING ALERTS
> > > > > > > > >>
> > > > > > > > >> Enter "VA to jump to VIEW ALERTS option
> > > > > > > > >>
> > > > > > > > >> Select Systems Manager Menu Option: operations Management
> > > > > > > > >>
> > > > > > > > >> System Status
> > > > > > > > >> Introductory text edit
> > > > > > > > >> CPU/Service/User/Device Stats
> > > > > > > > >>
> > > > > > > > >> RJD Kill off a users' job
> > > > > > > > >>
> > > > > > > > >> Alert Management ...
> > > > > > > > >> Alpha/Beta Test Option Usage Menu ...
> > > > > > > > >> Clean old Job Nodes in XUTL
> > > > > > > > >> Delete Old (>14 d) Alerts
> > > > > > > > >> Foundations Management
> > > > > > > > >> Kernel Management Menu ...
> > > > > > > > >> Post sign-in Text Edit
> > > > > > > > >> RPC Broker Management Menu ...
> > > > > > > > >> User Management Menu ...
> > > > > > > > >>
> > > > > > > > >> You have PENDING ALERTS
> > > > > > > > >>
> > > > > > > > >> Enter "VA to jump to VIEW ALERTS option
> > > > > > > > >>
> > > > > > > > >> Select Operations Management Option: rpc Broker Management
> > >
> > > Menu
> > >
> > > > > > > > >> RPC Listener Edit
> > > > > > > > >> Start All RPC Broker Listeners
> > > > > > > > >> Stop All RPC Broker Listeners
> > > > > > > > >> Clear XWB Log Files
> > > > > > > > >> Debug Parameter Edit
> > > > > > > > >> View XWB Log
> > > > > > > > >>
> > > > > > > > >> You have PENDING ALERTS
> > > > > > > > >>
> > > > > > > > >> Enter "VA to jump to VIEW ALERTS option
> > > > > > > > >>
> > > > > > > > >> Select RPC Broker Management Menu Option: debug Parameter
> > > > > > > > >> Edit
> > > > > > > > >>
> > > > > > > > >>
> > > > > > > > >>
> > > > > > > > >> ----- Setting RPCBroker debug logging for System:
> > > > > > > > >> FOIA.PLATINUM.VA.GOV----- Enable Broker Logging: 3 very
> > >
> > > Verbose
> > >
> > > > > > > > >> RPC Listener Edit
> > > > > > > > >> Start All RPC Broker Listeners
> > > > > > > > >> Stop All RPC Broker Listeners
> > > > > > > > >> Clear XWB Log Files
> > > > > > > > >> Debug Parameter Edit
> > > > > > > > >> View XWB Log
> > > > > > > > >>
> > > > > > > > >> You have PENDING ALERTS
> > > > > > > > >>
> > > > > > > > >> Enter "VA to jump to VIEW ALERTS option
> > > > > > > > >>
> > > > > > > > >> Select RPC Broker Management Menu Option:
> > > > > > > > >>
> > > > > > > > >> --
> > > > > > > > >> Nancy Anthracite
> > > > > > > > >>
> > > > > > > > >> On Wednesday, February 22, 2012, Jignesh Patel wrote:
> > > > > > > > >> > Nancy,
> > > > > > > > >> > I see following;
> > > > > > > > >> >
> > > > > > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> > > > >
> > > > > (user-defined
> > > > >
> > > > > > > > >> > error trap)
> > > > > > > > >> > At M source location BREAD+15^XWBRW
> > > > > > > > >> > Wed Feb 22 05:29:38 GMT 2012
> > > > > > > > >> > LANG=en_US.UTF-8
> > > > > > > > >> > LC_CTYPE="en_US.UTF-8"
> > > > > > > > >> > LC_NUMERIC="en_US.UTF-8"
> > > > > > > > >> > LC_TIME="en_US.UTF-8"
> > > > > > > > >> > LC_COLLATE="en_US.UTF-8"
> > > > > > > > >> > LC_MONETARY="en_US.UTF-8"
> > > > > > > > >> > LC_MESSAGES="en_US.UTF-8"
> > > > > > > > >> > LC_PAPER="en_US.UTF-8"
> > > > > > > > >> > LC_NAME="en_US.UTF-8"
> > > > > > > > >> > LC_ADDRESS="en_US.UTF-8"
> > > > > > > > >> > LC_TELEPHONE="en_US.UTF-8"
> > > > > > > > >> > LC_MEASUREMENT="en_US.UTF-8"
> > > > > > > > >> > LC_IDENTIFICATION="en_US.UTF-8"
> > > > > > > > >> > LC_ALL=en_US.UTF-8
> > > > > > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> > > > >
> > > > > (user-defined
> > > > >
> > > > > > > > >> > error trap)
> > > > > > > > >> > At M source location BREAD+15^XWBRW
> > > > > > > > >> > Wed Feb 22 05:29:43 GMT 2012
> > > > > > > > >> > LANG=en_US.UTF-8
> > > > > > > > >> > LC_CTYPE="en_US.UTF-8"
> > > > > > > > >> > LC_NUMERIC="en_US.UTF-8"
> > > > > > > > >> > LC_TIME="en_US.UTF-8"
> > > > > > > > >> > LC_COLLATE="en_US.UTF-8"
> > > > > > > > >> > LC_MONETARY="en_US.UTF-8"
> > > > > > > > >> > LC_MESSAGES="en_US.UTF-8"
> > > > > > > > >> > LC_PAPER="en_US.UTF-8"
> > > > > > > > >> > LC_NAME="en_US.UTF-8"
> > > > > > > > >> > LC_ADDRESS="en_US.UTF-8"
> > > > > > > > >> > LC_TELEPHONE="en_US.UTF-8"
> > > > > > > > >> > LC_MEASUREMENT="en_US.UTF-8"
> > > > > > > > >> > LC_IDENTIFICATION="en_US.UTF-8"
> > > > > > > > >> > LC_ALL=en_US.UTF-8
> > > > > > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> > > > >
> > > > > (user-defined
> > > > >
> > > > > > > > >> > error trap)
> > > > > > > > >> > At M source location BREAD+15^XWBRW
> > > > > > > > >> >
> > > > > > > > >> > On Tue, Feb 21, 2012 at 10:36 PM, Nancy Anthracite <
> > > > > > > > >> >
> > > > > > > > >> > nanthracite@earthlink.net> wrote:
> > > > > > > > >> > > If that
> 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log
> > > > > > > > >> > > is
> > > > > > >
> > > > > > > actually
> > > > > > >
> > > > > > > > >> > > on the same line as the line above it in the email,
> what
> > >
> > > are
> > >
> > > > > you
> > > > >
> > > > > > > > >> > > seeing
> > > > > > > > >>
> > > > > > > > >> in
> > > > > > > > >>
> > > > > > > > >> > > /home/ecloud/Downloads/VistA/log/EHR-gui.log?
> > > > > > > > >> > >
> > > > > > > > >> > > --
> > > > > > > > >> > > Nancy Anthracite
> > > > > > > > >> > >
> > > > > > > > >> > > On Tuesday, February 21, 2012, you wrote:
> > > > > > > > >> > > > Nancy,
> > > > > > > > >> > > >
> > > > > > > > >> > > > Here you go. The locale information is being placed
> > > > > > > > >> > > > into the
> > > > > > > > >>
> > > > > > > > >> EHR-gui to
> > > > > > > > >>
> > > > > > > > >> > > > make sure it should be taken as somehow GT.M was
> > >
> > > ignoring
> > >
> > > > > > > > >> > > > UTF-8
> > >
> > >
> ------------------------------------------------------------------------
> > >
> > > > > > > > >> -
> > > > > > > > >>
> > > > > > > > >> > > --
> > > > > > > > >> > >
> > > > > > > > >> > > > --------------------------------------- #!/bin/bash
> > > > > > > > >> > > > #EHR-gui: This is a file to run RPCBroker as a Linux
> > > > > > > > >> > > > service #make sure of our directory
> > > > > > > > >> > > > cd /home/ecloud/Downloads/VistA
> > > > > > > > >> > > > date >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
> > > > > > > > >> > > > #Get the GTM profile
> > > > > > > > >> > > > source /etc/profile.d/gtmprofile.sh
> > > > > > > > >> > > > #set locale
> > > > > > > > >> > > > export LANG=en_US.UTF-8
> > > > > > > > >> > > > export LC_CTYPE=en_US.UTF-8
> > > > > > > > >> > > > export LC_NUMERIC="en_US.UTF-8"
> > > > > > > > >> > > > export LC_TIME="en_US.UTF-8"
> > > > > > > > >> > > > export LC_COLLATE="en_US.UTF-8"
> > > > > > > > >> > > > export LC_MONETARY="en_US.UTF-8"
> > > > > > > > >> > > > export LC_MESSAGES="en_US.UTF-8"
> > > > > > > > >> > > > export LC_PAPER="en_US.UTF-8"
> > > > > > > > >> > > > export LC_NAME="en_US.UTF-8"
> > > > > > > > >> > > > export LC_ADDRESS="en_US.UTF-8"
> > > > > > > > >> > > > export LC_TELEPHONE="en_US.UTF-8"
> > > > > > > > >> > > > export LC_MEASUREMENT="en_US.UTF-8"
> > > > > > > > >> > > > export LC_IDENTIFICATION="en_US.UTF-8"
> > > > > > > > >> > > > export LC_ALL=en_US.UTF-8
> > > > > > > > >> > > > locale >>
> /home/ecloud/Downloads/VistA/log/EHR-gui.log
> > > > > > > > >> > > > #Run routine
> > > > > > > > >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
> > > > > > > > >> > > > 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log
> > >
> > >
> ------------------------------------------------------------------------
> > >
> > > > > > > > >> -
> > > > > > > > >>
> > > > > > > > >> > > --
> > > > > > > > >> > >
> > > > > > > > >> > > > ----------------------------------
> > > > > > > > >> > > >
> > > > > > > > >> > > > When I run from command line
> > > > > > > > >> > > >
> > > > > > > > >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
> > > > > > > > >> > > > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> > > > > > >
> > > > > > > (user-defined
> > > > > > >
> > > > > > > > >> error
> > > > > > > > >>
> > > > > > > > >> > > > trap)
> > > > > > > > >> > > > At M source location BREAD+15^XWBRW
> > > > > > > > >> > > >
> > > > > > > > >> > > > UTF8>
> > > > > > > > >> > > >
> > > > > > > > >> > > >
> > > > > > > > >> > > >
> > > > > > > > >> > > >
> > > > > > > > >> > > > -Jignesh
> > > > > > > > >> > > >
> > > > > > > > >> > > > On Tue, Feb 21, 2012 at 7:33 PM, Nancy Anthracite
> > > > > > > > >> > > > <nanthracite@earthlink.net
> > > > > > > > >> > > >
> > > > > > > > >> > > > > wrote:
> > > > > > > > >> > > > >
> > > > > > > > >> > > > > Now show me the contents of the file
> > > > > > > > >> > >
> > > > > > > > >> > > /home/ecloud/Downloads/VistA/EHR-gui
> > > > > > > > >> > >
> > > > > > > > >> > > > > --
> > > > > > > > >> > > > > Nancy Anthracite
> > > > > > > > >> > > > >
> > > > > > > > >> > > > > On Tuesday, February 21, 2012, Jignesh Patel
> wrote:
> > > > > > > > >> > > > > > Nancy are you talking about this file.
> > > > > > > > >> > > > > > [ecloud@s1-iCare-VistA1 xinetd.d]$ cat EHR-gui
> > > > > > > > >> > > > > > service EHR-gui
> > > > > > > > >> > > > > >
> > > > > > > > >> > > > > > {
> > > > > > > > >> > > > > > port = 9230
> > > > > > > > >> > > > > > socket_type = stream
> > > > > > > > >> > > > > > protocol = tcp
> > > > > > > > >> > > > > > user = ecloud
> > > > > > > > >> > > > > > server =
> > >
> > > /home/ecloud/Downloads/VistA/EHR-gui
> > >
> > > > > > > > >> > > > > > type = UNLISTED
> > > > > > > > >> > > > > > wait = no
> > > > > > > > >> > > > > > disable = no
> > > > > > > > >> > > > > > }
> > > > > > > > >> > > > > >
> > > > > > > > >> > > > > > On Mon, Feb 20, 2012 at 5:37 PM, Nancy
> Anthracite
> > > > > > > > >> > > > > > <nanthracite@earthlink.net
> > > > > > > > >> > > > > >
> > > > > > > > >> > > > > > > wrote:
> > > > > > > > >> > > > > > >
> > > > > > > > >> > > > > > > Look at the log file for the xinetd connection
> > >
> > > which
> > >
> > > > > is
> > > > >
> > > > > > > > >> probably
> > > > > > > > >>
> > > > > > > > >> > > > > defined
> > > > > > > > >> > > > >
> > > > > > > > >> > > > > > > in the "server" code in the xinetd connection
> > > > > > > > >> > > > > > > file in
> > > > > > > > >> > >
> > > > > > > > >> > > /etc/xinetd.d/
> > > > > > > > >> > >
> > > > > > > > >> > > > > > > --
> > > > > > > > >> > > > > > > Nancy Anthracite
> > > > > > > > >> > > > > > >
> > > > > > > > >> > > > > > > On Monday, February 20, 2012, Jignesh Patel
> wrote:
> > > > > > > > >> > > > > > > > While running Xinetd on FOIA-VistA on gtm we
> > > > > > > > >> > > > > > > > got
> > > > > > >
> > > > > > > following
> > > > > > >
> > > > > > > > >> > > > > > > > error.
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > > "Non-empty value assigned to $ECODE
> > >
> > > (user-defined
> > >
> > > > > > > > >> > > > > > > > error
> > > > > > > > >>
> > > > > > > > >> trap)
> > > > > > > > >>
> > > > > > > > >> > > > > > > > At
> > > > > > > > >> > >
> > > > > > > > >> > > M
> > > > > > > > >> > >
> > > > > > > > >> > > > > > > > source location BREAD+15^XWBRW"
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > > Does anybody encounter the same error?
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > > -Jignesh
>
>

like0

error while executing CPRS

Jignesh Patel's picture

I also see there is no port defined in RPC broker site parameters

Select RPC BROKER SITE PARAMETERS DOMAIN NAME: VISTA.P
LATINUM.MED.VA.GOV
DOMAIN NAME: VISTA.PLATINUM.MED.VA.GOV//
MAIL GROUP FOR ALERTS:
Select BOX-VOLUME PAIR: ROU:s1-iCare-VistA1//
BOX-VOLUME PAIR: ROU:s1-iCare-VistA1//
Select PORT: 9230
Are you adding '9230' as a new PORT (the 1ST for this L
ISTENER)? No// no (No) ??
Select PORT:

On Wed, Feb 22, 2012 at 12:26 PM, Jignesh Patel <jigneshmpatel@gmail.com>wrote:

> Nancy,
> Here you go
> UTF8>D ^%G
>
> Output device: <terminal>:
>
> List ^%ZOSF
> ^%ZOSF("$INC")=0
> ^%ZOSF("ACTJ")="S Y=$$ACTJ^%ZOSV()"
> ^%ZOSF("AVJ")="S Y=$$AVJ^%ZOSV()"
> ^%ZOSF("BRK")="U $I:(CENABLE)"
> ^%ZOSF("DEL")="D DEL^%ZOSV2(X) ;N %RD,%OD S %RD=$P($S($ZR
> O[""("":$P($P($ZRO,""("",2),"")""),1:$ZRO),"" "
> ")_""/"",%OD=$S($ZRO[""("":$P($ZRO,""("",1)_""/
> "",1:%RD) ZSYSTEM ""rm -f ""_%RD_X_"".m"" ZSYST
> EM ""rm -f ""_%OD_X_"".o"""
> ^%ZOSF("EOFF")="U $I:(NOECHO)"
> ^%ZOSF("EON")="U $I:(ECHO)"
> ^%ZOSF("EOT")="S Y=$ZA\1024#2 ; <====="
> ^%ZOSF("ERRTN")="^%ZTER"
> ^%ZOSF("ETRP")="Q"
> ^%ZOSF("GD")="G ^%GD"
> ^%ZOSF("JOBPARAM")="G JOBPAR^%ZOSV"
> ^%ZOSF("LABOFF")="U IO:(NOECHO) ; <====="
> ^%ZOSF("LOAD")="D LOAD^%ZOSV2(X) ;S %N=0 F XCNP=XCNP+1:1
> S %N=%N+1,%=$T(+%N^@X) Q:$L(%)=0 S @(DIF_XCNP_
> "",0)"")=%"
> ^%ZOSF("LPC")="S Y="""" ; <====="
> ^%ZOSF("MAGTAPE")="S %MT(""BS"")=""*1"",%MT(""FS"")=""*2"
> ",%MT(""WTM"")=""*3"",%MT(""WB"")=""*4"",%MT(""
> REW"")=""*5"",%MT(""RB"")=""*6"",%MT(""REL"")="
> "*7"",%MT(""WHL"")=""*8"",%MT(""WEL"")=""*9"" ;
> <====="
> ^%ZOSF("MAXSIZ")="Q"
> ^%ZOSF("MGR")="VAH,ROU"
> ^%ZOSF("MTBOT")="S Y=$ZA\32#2 ; <====="
> ^%ZOSF("MTERR")="S Y=$ZA\32768#2 ; <====="
> ^%ZOSF("MTONLINE")="S Y=$ZA\64#2 ; <====="
> ^%ZOSF("MTWPROT")="S Y=$ZA\4#2 ; <====="
> ^%ZOSF("NBRK")="U $I:(NOCENABLE)"
> ^%ZOSF("NO-PASSALL")="U $I:(ESCAPE:TERMINATOR="""":NOPAST
> HRU)"
> ^%ZOSF("NO-TYPE-AHEAD")="U $I:(NOTYPEAHEAD)"
> ^%ZOSF("OS")="GT.M (Unix)^19"
> ^%ZOSF("PASSALL")="U $I:(NOESCAPE:NOTERMINATOR:PASTHRU)"
> ^%ZOSF("PRIINQ")="S Y=$$PRIINQ^%ZOSV()"
> ^%ZOSF("PRIORITY")="Q ;G PRIORITY^%ZOSV"
> ^%ZOSF("PROD")="VAH,ROU"
> ^%ZOSF("PROGMODE")="S Y=$$PROGMODE^%ZOSV()"
> ^%ZOSF("RD")="G ^%RD"
> ^%ZOSF("RESJOB")="Q:'$D(DUZ) Q:'$D(^XUSEC(""XUMGR"",+DUZ
> )) N XQZ S XQZ=""^FORCEX[MGR]"" D DO^%XUCI ; <
> ====="
> ^%ZOSF("RM")="U $I:WIDTH=$S(X<256:X,1:0)"
> ^%ZOSF("RSEL")="K ^UTILITY($J) D ^%RSEL S X="""" X ""F S
> X=$O(%ZR(X)) Q:X="""""""" S ^UTILITY($J,X)=""
> """""""" K %ZR"
> ^%ZOSF("RSUM")="S Y=0 F %=1,3:1 S %1=$T(+%^@X),%3=$F(%1,"
> " "") Q:'%3 S %3=$S($E(%1,%3)'="";"":$L(%1),$E
> (%1,%3+1)="";"":$L(%1),1:%3-2) F %2=1:1:%3 S Y=
> $A(%1,%2)*%2+Y"
> ^%ZOSF("RSUM1")="N %,%1,%2,%3 S Y=0 F %=1,3:1 S %1=$T(+%^
> @X),%3=$F(%1,"" "") Q:'%3 S %3=$S($E(%1,%3)'="
> ";"":$L(%1),$E(%1,%3+1)="";"":$L(%1),1:%3-2) F
> %2=1:1:%3 S Y=$A(%1,%2)*(%2+%)+Y"
> ^%ZOSF("SAVE")="D SAVE^%ZOSV2(X) ;N %I,%F S %I=$I,%F=$P($
> S($ZRO[""("":$P($P($ZRO,""("",2),"")""),1:$ZRO)
> ,"" "")_""/""_X_"".m"" O %F:(NEWVERSION) U %F X
> ""F S XCN=$O(@(DIE_XCN_"""")"""")) Q:+XCN'=XC
> N S %=@(DIE_XCN_"""",0)"""") Q:$E(%,1)=""""$""
> "" I $E(%)'="""";"""" W %,!"" C %F U %I"
> ^%ZOSF("SIZE")="S Y=0 F I=1:1 S %=$T(+I) Q:%="""" S Y=Y+
> $L(%)+2 ; <====="
> ^%ZOSF("SS")="D ^ZSY"
> ^%ZOSF("TEST")="I X]"""",$T(^@X)]"""""
> ^%ZOSF("TMK")="S Y=$ZA\16384#2"
> ^%ZOSF("TMP")="/tmp/"
> ^%ZOSF("TRAP")="$ZT=""G ""_X"
> ^%ZOSF("TRMOFF")="U $I:(TERMINATOR="""")"
> ^%ZOSF("TRMON")="U $I:(TERMINATOR=$C(0,1,2,3,4,5,6,7,8,9,
> 10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25
> ,26,27,28,29,30,31,127))"
> ^%ZOSF("TRMRD")="S Y=$A($ZB)"
> ^%ZOSF("TYPE-AHEAD")="U $I:(TYPEAHEAD)"
> ^%ZOSF("UCI")="S Y=^%ZOSF(""PROD"")"
> ^%ZOSF("UCICHECK")="S Y=1"
> ^%ZOSF("UPPERCASE")="S Y=$TR(X,""abcdefghijklmnopqrstuvwx
> yz"",""ABCDEFGHIJKLMNOPQRSTUVWXYZ"")"
> ^%ZOSF("VOL")="ROU"
> ^%ZOSF("XY")="S $X=DX,$Y=DY ; <====="
> ^%ZOSF("ZD")="S Y=$$HTE^XLFDT(X,2) I $L($P(Y,""/""))=1 S
> Y=0_
>
>
> I have created another volume set as I was not seeing ROU. Now I want to
> delete the Volume Set FOI how to do that? Or it doesn't matter.
>
> Select VOLUME SET: ?
> Answer with VOLUME SET
> Choose from:
> FOI
> ROU
>
>
> You may enter a new VOLUME SET, if you wish
> Answer must be 3-30 characters in length.
>
> Select VOLUME SET: ROU
> VOLUME SET: ROU//
> TYPE: GENERAL PURPOSE VOLUME SET//
> INHIBIT LOGONS?: NO//
> LINK ACCESS?: NO//
> OUT OF SERVICE?: NO//
> REQUIRED VOLUME SET?: NO//
> TASKMAN FILES UCI: VAH//
> TASKMAN FILES VOLUME SET: ROU//
> REPLACEMENT VOLUME SET:
> DAYS TO KEEP OLD TASKS: 4//
> SIGNON/PRODUCTION VOLUME SET: Yes//
> RE-QUEUES BEFORE UN-SCHEDULE: 12//
>
> On Wed, Feb 22, 2012 at 12:13 PM, Nancy Anthracite <
> nanthracite@earthlink.net> wrote:
>
>> Well, not too bad anyway. Let's kill off FOI:FOIISCSVR, but first show
>> me a
>> Fileman inquire on the RPC Broker site parameters file and then D ^%G and
>> list
>> %ZOSF for me.
>>
>> --
>> Nancy Anthracite
>>
>> On Wednesday, February 22, 2012, Jignesh Patel wrote:
>> > Here is out of D ^ZTMON
>> >
>> > Checking Taskman. Current $H=62509,61341 (Feb 22, 2012@17:02:21)
>> > RUN NODE=62509,61332 (Feb 22, 2012@17:02:12)
>> > Taskman is current..
>> > Checking the Status List:
>> > Node weight status time $J
>> > ROU:s1-iCare-VistA1 RUN T@17:02:12 26684 Main Loop
>> >
>> > Checking the Schedule List:
>> > Taskman has no tasks scheduled.
>> >
>> > Checking the IO Lists: Last TM scan: 2 sec,
>> > There are no tasks waiting for devices.
>> >
>> > Checking the Job List:
>> > There are no tasks waiting for partitions.
>> >
>> > Checking the Task List:
>> > There are no tasks currently running.
>> > Checking Sub-Managers:
>> > On node FOI:FOIISCSVR there are no free Sub-Manager(s). Status: Run
>> > On node ROU:s1-iCare-VistA1 there are 4 free Sub-Manager(s).
>> Status:
>> > Run
>> >
>> > Enter monitor action: UPDATE//
>> >
>> >
>> > Also when I tried to check Volume it shows me
>> > Select VOLUME SET: ?
>> > Answer with VOLUME SET:
>> > FOI
>> >
>> >
>> > You may enter a new VOLUME SET, if you wish
>> > Answer must be 3-30 characters in length.
>> >
>> > However my Volume is ROU.
>> >
>> > And
>> > UTF8>D GETENV^%ZOSV W Y
>> > VAH^ROU^s1-iCare-VistA1^ROU:s1-iCare-VistA1
>> >
>> >
>> > On Wed, Feb 22, 2012 at 11:52 AM, Nancy Anthracite <
>> >
>> > nanthracite@earthlink.net> wrote:
>> > > From the " ,ROU", I am not sure it is right. Show me what you get
>> with
>> > > D ^ZTMON.
>> > >
>> > > --
>> > > Nancy Anthracite
>> > >
>> > > On Wednesday, February 22, 2012, Jignesh Patel wrote:
>> > > > Nancy,
>> > > > I did run ZTMGRSET and ZUSET but not DINIT.
>> > > >
>> > > > -Jignesh
>> > > >
>> > > > On Wed, Feb 22, 2012 at 11:46 AM, Nancy Anthracite <
>> > > >
>> > > > nanthracite@earthlink.net> wrote:
>> > > > > Did you run ^ZTMGRSET and ^DINIT and ^ZUSET and set up the Taskman
>> > > > > site parameters and all of your devices, etc?
>> > > > >
>> > > > > --
>> > > > > Nancy Anthracite
>> > > > >
>> > > > > On Wednesday, February 22, 2012, Jignesh Patel wrote:
>> > > > > > May be because I don't have task man running. See below:
>> > > > > >
>> > > > > > I tried to check TASKMAN and found
>> > > > > >
>> > > > > > Operating System: GT.M (Unix)
>> > > > > > Volume Set: ROU
>> > > > > > Cpu-volume Pair: ROU:s1-iCare-VistA1
>> > > > > > TaskMan Files UCI and Volume Set: ,ROU
>> > > > > >
>> > > > > > Seems there is no UCI setup. Is that a problem?
>> > > > > >
>> > > > > >
>> > > > > > And My task man is not running
>> > > > > > hecking Taskman. Current $H=62509,59871 (Feb 22, 2012@16
>> :37:51)
>> > > > > >
>> > > > > > RUN NODE=<Undefined>
>> > > > > >
>> > > > > > Taskman is shutting down not running..
>> > > > > >
>> > > > > > Checking the Status List:
>> > > > > > Node weight status time $J
>> > > > > >
>> > > > > > The Status List is empty.
>> > > > > >
>> > > > > > Checking the Schedule List:
>> > > > > > Taskman has no tasks scheduled.
>> > > > > >
>> > > > > > Checking the IO Lists: Last TM scan: 172947 sec,
>> > > > > >
>> > > > > > There are no tasks waiting for devices.
>> > > > > >
>> > > > > > Checking the Job List:
>> > > > > > There are no tasks waiting for partitions.
>> > > > > >
>> > > > > > Checking the Task List:
>> > > > > > There are no tasks currently running.
>> > > > > >
>> > > > > > Checking Sub-Managers:
>> > > > > > On node FOI:FOIISCSVR there are no free Sub-Manager(s).
>> > > > > > Status: Stop On node ROU:s1-iCare-VistA1 there are no free
>> > > > > > Sub-Manager(s).
>> > > > >
>> > > > > Status:
>> > > > > > Stop
>> > > > > >
>> > > > > > On Wed, Feb 22, 2012 at 11:29 AM, Nancy Anthracite <
>> > > > > >
>> > > > > > nanthracite@earthlink.net> wrote:
>> > > > > > > That log is usually a pretty verbose log and you are
>> apparently
>> > > > > > > not
>> > > > >
>> > > > > even
>> > > > >
>> > > > > > > getting much past square one. It has very little to say. Did
>> you
>> > > > > > > pick the very verbose option, #3?
>> > > > > > >
>> > > > > > > Do be sure you have a null device set up correctly as that is
>> a
>> > > > > > > common reason
>> > > > > > > for a crash and burn, but it usually gives a a different
>> error.
>> > > > > > > --
>> > > > > > > Nancy Anthracite
>> > > > > > >
>> > > > > > > On Wednesday, February 22, 2012, Jignesh Patel wrote:
>> > > > > > > > I see following in the log
>> > > > > > > >
>> > > > > > > > Log from Job 30930 2 Lines
>> > > > > > > > 15:57:38 = Log start: Feb 22, 2012@15:57:38
>> > > > > > > > 15:57:38 = XWBTCPM
>> > > > > > > >
>> > > > > > > > Log from Job 31002 2 Lines
>> > > > > > > > 15:57:48 = Log start: Feb 22, 2012@15:57:48
>> > > > > > > > 15:57:48 = XWBTCPM
>> > > > > > > >
>> > > > > > > > Log from Job 31038 2 Lines
>> > > > > > > > 15:57:53 = Log start: Feb 22, 2012@15:57:53
>> > > > > > > > 15:57:53 = XWBTCPM
>> > > > > > > >
>> > > > > > > > On Wed, Feb 22, 2012 at 10:55 AM, Jignesh Patel
>> > > > > > >
>> > > > > > > <jigneshmpatel@gmail.com>wrote:
>> > > > > > > > > Nancy.
>> > > > > > > > > Sorry I slept let yesterday. I have implemented the step
>> you
>> > >
>> > > did
>> > >
>> > > > > > > > > mention.I have enabled RPC broker debug.
>> > > > > > > > >
>> > > > > > > > > Now what I need to do?
>> > > > > > > > >
>> > > > > > > > >
>> > > > > > > > > On Wed, Feb 22, 2012 at 6:55 AM, Nancy Anthracite <
>> > > > > > > > >
>> > > > > > > > > nanthracite@earthlink.net> wrote:
>> > > > > > > > >> Well, I understand there is a bug in the code so the
>> error
>> > >
>> > > trap
>> > >
>> > > > > does
>> > > > >
>> > > > > > > not
>> > > > > > >
>> > > > > > > > >> work
>> > > > > > > > >> right so it is hard to know.
>> > > > > > > > >>
>> > > > > > > > >> I have done a port of the FOIA from 12-6-11 and CPRS is
>> > > > > > > > >> connecting OK
>> > > > > > >
>> > > > > > > so
>> > > > > > >
>> > > > > > > > >> I don't know what to say until the error trap is working,
>> > > > > > > > >> and then it will probably take someone else to say.
>> > > > > > > > >>
>> > > > > > > > >> But, we might glean something from the debugger for the
>> > >
>> > > broker.
>> > >
>> > > > > > > > >> Do the following and then try to connect and see what you
>> > > > > > > > >> get
>> > >
>> > > in
>> > >
>> > > > > the
>> > > > >
>> > > > > > > log
>> > > > > > >
>> > > > > > > > >> when
>> > > > > > > > >> you run the View XWB Log option.
>> > > > > > > > >>
>> > > > > > > > >>
>> > > > > > > > >>
>> > > > > > > > >> GTM>S DUZ=1 D ^XUP
>> > > > > > > > >>
>> > > > > > > > >> Setting up programmer environment
>> > > > > > > > >> This is a TEST account.
>> > > > > > > > >>
>> > > > > > > > >> Terminal Type set to: C-VT220
>> > > > > > > > >>
>> > > > > > > > >> Select OPTION NAME: eve
>> > > > > > > > >>
>> > > > > > > > >> 1 EVE Systems Manager Menu
>> > > > > > > > >> 2 EVENT CAPTURE ECX ECS MAINTENANCE Event
>> Capture
>> > > > > > > > >> 3 EVENT CAPTURE (ECS) EXTRACT AU ECX ECS SOURCE
>> AUDIT
>> > > > > > > > >> Event
>> > > > > > > > >>
>> > > > > > > > >> Capture
>> > > > > > > > >> (ECS) Extract Audit
>> > > > > > > > >>
>> > > > > > > > >> 4 EVENT CAPTURE DATA ENTRY ECENTER Event
>> Capture
>> > >
>> > > Data
>> > >
>> > > > > > > > >> Entry 5 EVENT CAPTURE EXTRACT ECXEC Event
>> Capture
>> > > > > > > > >> Extract
>> > > > > > > > >>
>> > > > > > > > >> Press <RETURN> to see more, '^' to exit this list, OR
>> > > > > > > > >> CHOOSE 1-5: 1 EVE Systems Manager Menu
>> > > > > > > > >>
>> > > > > > > > >> Core Applications ...
>> > > > > > > > >> Device Management ...
>> > > > > > > > >> Menu Management ...
>> > > > > > > > >> Programmer Options ...
>> > > > > > > > >> Operations Management ...
>> > > > > > > > >> Spool Management ...
>> > > > > > > > >> Information Security Officer Menu ...
>> > > > > > > > >> Taskman Management ...
>> > > > > > > > >> User Management ...
>> > > > > > > > >> Application Utilities ...
>> > > > > > > > >> Capacity Planning ...
>> > > > > > > > >> HL7 Main Menu ...
>> > > > > > > > >>
>> > > > > > > > >> You have PENDING ALERTS
>> > > > > > > > >>
>> > > > > > > > >> Enter "VA to jump to VIEW ALERTS option
>> > > > > > > > >>
>> > > > > > > > >> Select Systems Manager Menu Option: operations Management
>> > > > > > > > >>
>> > > > > > > > >> System Status
>> > > > > > > > >> Introductory text edit
>> > > > > > > > >> CPU/Service/User/Device Stats
>> > > > > > > > >>
>> > > > > > > > >> RJD Kill off a users' job
>> > > > > > > > >>
>> > > > > > > > >> Alert Management ...
>> > > > > > > > >> Alpha/Beta Test Option Usage Menu ...
>> > > > > > > > >> Clean old Job Nodes in XUTL
>> > > > > > > > >> Delete Old (>14 d) Alerts
>> > > > > > > > >> Foundations Management
>> > > > > > > > >> Kernel Management Menu ...
>> > > > > > > > >> Post sign-in Text Edit
>> > > > > > > > >> RPC Broker Management Menu ...
>> > > > > > > > >> User Management Menu ...
>> > > > > > > > >>
>> > > > > > > > >> You have PENDING ALERTS
>> > > > > > > > >>
>> > > > > > > > >> Enter "VA to jump to VIEW ALERTS option
>> > > > > > > > >>
>> > > > > > > > >> Select Operations Management Option: rpc Broker
>> Management
>> > >
>> > > Menu
>> > >
>> > > > > > > > >> RPC Listener Edit
>> > > > > > > > >> Start All RPC Broker Listeners
>> > > > > > > > >> Stop All RPC Broker Listeners
>> > > > > > > > >> Clear XWB Log Files
>> > > > > > > > >> Debug Parameter Edit
>> > > > > > > > >> View XWB Log
>> > > > > > > > >>
>> > > > > > > > >> You have PENDING ALERTS
>> > > > > > > > >>
>> > > > > > > > >> Enter "VA to jump to VIEW ALERTS option
>> > > > > > > > >>
>> > > > > > > > >> Select RPC Broker Management Menu Option: debug Parameter
>> > > > > > > > >> Edit
>> > > > > > > > >>
>> > > > > > > > >>
>> > > > > > > > >>
>> > > > > > > > >> ----- Setting RPCBroker debug logging for System:
>> > > > > > > > >> FOIA.PLATINUM.VA.GOV----- Enable Broker Logging: 3 very
>> > >
>> > > Verbose
>> > >
>> > > > > > > > >> RPC Listener Edit
>> > > > > > > > >> Start All RPC Broker Listeners
>> > > > > > > > >> Stop All RPC Broker Listeners
>> > > > > > > > >> Clear XWB Log Files
>> > > > > > > > >> Debug Parameter Edit
>> > > > > > > > >> View XWB Log
>> > > > > > > > >>
>> > > > > > > > >> You have PENDING ALERTS
>> > > > > > > > >>
>> > > > > > > > >> Enter "VA to jump to VIEW ALERTS option
>> > > > > > > > >>
>> > > > > > > > >> Select RPC Broker Management Menu Option:
>> > > > > > > > >>
>> > > > > > > > >> --
>> > > > > > > > >> Nancy Anthracite
>> > > > > > > > >>
>> > > > > > > > >> On Wednesday, February 22, 2012, Jignesh Patel wrote:
>> > > > > > > > >> > Nancy,
>> > > > > > > > >> > I see following;
>> > > > > > > > >> >
>> > > > > > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
>> > > > >
>> > > > > (user-defined
>> > > > >
>> > > > > > > > >> > error trap)
>> > > > > > > > >> > At M source location BREAD+15^XWBRW
>> > > > > > > > >> > Wed Feb 22 05:29:38 GMT 2012
>> > > > > > > > >> > LANG=en_US.UTF-8
>> > > > > > > > >> > LC_CTYPE="en_US.UTF-8"
>> > > > > > > > >> > LC_NUMERIC="en_US.UTF-8"
>> > > > > > > > >> > LC_TIME="en_US.UTF-8"
>> > > > > > > > >> > LC_COLLATE="en_US.UTF-8"
>> > > > > > > > >> > LC_MONETARY="en_US.UTF-8"
>> > > > > > > > >> > LC_MESSAGES="en_US.UTF-8"
>> > > > > > > > >> > LC_PAPER="en_US.UTF-8"
>> > > > > > > > >> > LC_NAME="en_US.UTF-8"
>> > > > > > > > >> > LC_ADDRESS="en_US.UTF-8"
>> > > > > > > > >> > LC_TELEPHONE="en_US.UTF-8"
>> > > > > > > > >> > LC_MEASUREMENT="en_US.UTF-8"
>> > > > > > > > >> > LC_IDENTIFICATION="en_US.UTF-8"
>> > > > > > > > >> > LC_ALL=en_US.UTF-8
>> > > > > > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
>> > > > >
>> > > > > (user-defined
>> > > > >
>> > > > > > > > >> > error trap)
>> > > > > > > > >> > At M source location BREAD+15^XWBRW
>> > > > > > > > >> > Wed Feb 22 05:29:43 GMT 2012
>> > > > > > > > >> > LANG=en_US.UTF-8
>> > > > > > > > >> > LC_CTYPE="en_US.UTF-8"
>> > > > > > > > >> > LC_NUMERIC="en_US.UTF-8"
>> > > > > > > > >> > LC_TIME="en_US.UTF-8"
>> > > > > > > > >> > LC_COLLATE="en_US.UTF-8"
>> > > > > > > > >> > LC_MONETARY="en_US.UTF-8"
>> > > > > > > > >> > LC_MESSAGES="en_US.UTF-8"
>> > > > > > > > >> > LC_PAPER="en_US.UTF-8"
>> > > > > > > > >> > LC_NAME="en_US.UTF-8"
>> > > > > > > > >> > LC_ADDRESS="en_US.UTF-8"
>> > > > > > > > >> > LC_TELEPHONE="en_US.UTF-8"
>> > > > > > > > >> > LC_MEASUREMENT="en_US.UTF-8"
>> > > > > > > > >> > LC_IDENTIFICATION="en_US.UTF-8"
>> > > > > > > > >> > LC_ALL=en_US.UTF-8
>> > > > > > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
>> > > > >
>> > > > > (user-defined
>> > > > >
>> > > > > > > > >> > error trap)
>> > > > > > > > >> > At M source location BREAD+15^XWBRW
>> > > > > > > > >> >
>> > > > > > > > >> > On Tue, Feb 21, 2012 at 10:36 PM, Nancy Anthracite <
>> > > > > > > > >> >
>> > > > > > > > >> > nanthracite@earthlink.net> wrote:
>> > > > > > > > >> > > If that
>> 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log
>> > > > > > > > >> > > is
>> > > > > > >
>> > > > > > > actually
>> > > > > > >
>> > > > > > > > >> > > on the same line as the line above it in the email,
>> what
>> > >
>> > > are
>> > >
>> > > > > you
>> > > > >
>> > > > > > > > >> > > seeing
>> > > > > > > > >>
>> > > > > > > > >> in
>> > > > > > > > >>
>> > > > > > > > >> > > /home/ecloud/Downloads/VistA/log/EHR-gui.log?
>> > > > > > > > >> > >
>> > > > > > > > >> > > --
>> > > > > > > > >> > > Nancy Anthracite
>> > > > > > > > >> > >
>> > > > > > > > >> > > On Tuesday, February 21, 2012, you wrote:
>> > > > > > > > >> > > > Nancy,
>> > > > > > > > >> > > >
>> > > > > > > > >> > > > Here you go. The locale information is being placed
>> > > > > > > > >> > > > into the
>> > > > > > > > >>
>> > > > > > > > >> EHR-gui to
>> > > > > > > > >>
>> > > > > > > > >> > > > make sure it should be taken as somehow GT.M was
>> > >
>> > > ignoring
>> > >
>> > > > > > > > >> > > > UTF-8
>> > >
>> > >
>> ------------------------------------------------------------------------
>> > >
>> > > > > > > > >> -
>> > > > > > > > >>
>> > > > > > > > >> > > --
>> > > > > > > > >> > >
>> > > > > > > > >> > > > --------------------------------------- #!/bin/bash
>> > > > > > > > >> > > > #EHR-gui: This is a file to run RPCBroker as a
>> Linux
>> > > > > > > > >> > > > service #make sure of our directory
>> > > > > > > > >> > > > cd /home/ecloud/Downloads/VistA
>> > > > > > > > >> > > > date >>
>> /home/ecloud/Downloads/VistA/log/EHR-gui.log
>> > > > > > > > >> > > > #Get the GTM profile
>> > > > > > > > >> > > > source /etc/profile.d/gtmprofile.sh
>> > > > > > > > >> > > > #set locale
>> > > > > > > > >> > > > export LANG=en_US.UTF-8
>> > > > > > > > >> > > > export LC_CTYPE=en_US.UTF-8
>> > > > > > > > >> > > > export LC_NUMERIC="en_US.UTF-8"
>> > > > > > > > >> > > > export LC_TIME="en_US.UTF-8"
>> > > > > > > > >> > > > export LC_COLLATE="en_US.UTF-8"
>> > > > > > > > >> > > > export LC_MONETARY="en_US.UTF-8"
>> > > > > > > > >> > > > export LC_MESSAGES="en_US.UTF-8"
>> > > > > > > > >> > > > export LC_PAPER="en_US.UTF-8"
>> > > > > > > > >> > > > export LC_NAME="en_US.UTF-8"
>> > > > > > > > >> > > > export LC_ADDRESS="en_US.UTF-8"
>> > > > > > > > >> > > > export LC_TELEPHONE="en_US.UTF-8"
>> > > > > > > > >> > > > export LC_MEASUREMENT="en_US.UTF-8"
>> > > > > > > > >> > > > export LC_IDENTIFICATION="en_US.UTF-8"
>> > > > > > > > >> > > > export LC_ALL=en_US.UTF-8
>> > > > > > > > >> > > > locale >>
>> /home/ecloud/Downloads/VistA/log/EHR-gui.log
>> > > > > > > > >> > > > #Run routine
>> > > > > > > > >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
>> > > > > > > > >> > > > 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log
>> > >
>> > >
>> ------------------------------------------------------------------------
>> > >
>> > > > > > > > >> -
>> > > > > > > > >>
>> > > > > > > > >> > > --
>> > > > > > > > >> > >
>> > > > > > > > >> > > > ----------------------------------
>> > > > > > > > >> > > >
>> > > > > > > > >> > > > When I run from command line
>> > > > > > > > >> > > >
>> > > > > > > > >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
>> > > > > > > > >> > > > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
>> > > > > > >
>> > > > > > > (user-defined
>> > > > > > >
>> > > > > > > > >> error
>> > > > > > > > >>
>> > > > > > > > >> > > > trap)
>> > > > > > > > >> > > > At M source location BREAD+15^XWBRW
>> > > > > > > > >> > > >
>> > > > > > > > >> > > > UTF8>
>> > > > > > > > >> > > >
>> > > > > > > > >> > > >
>> > > > > > > > >> > > >
>> > > > > > > > >> > > >
>> > > > > > > > >> > > > -Jignesh
>> > > > > > > > >> > > >
>> > > > > > > > >> > > > On Tue, Feb 21, 2012 at 7:33 PM, Nancy Anthracite
>> > > > > > > > >> > > > <nanthracite@earthlink.net
>> > > > > > > > >> > > >
>> > > > > > > > >> > > > > wrote:
>> > > > > > > > >> > > > >
>> > > > > > > > >> > > > > Now show me the contents of the file
>> > > > > > > > >> > >
>> > > > > > > > >> > > /home/ecloud/Downloads/VistA/EHR-gui
>> > > > > > > > >> > >
>> > > > > > > > >> > > > > --
>> > > > > > > > >> > > > > Nancy Anthracite
>> > > > > > > > >> > > > >
>> > > > > > > > >> > > > > On Tuesday, February 21, 2012, Jignesh Patel
>> wrote:
>> > > > > > > > >> > > > > > Nancy are you talking about this file.
>> > > > > > > > >> > > > > > [ecloud@s1-iCare-VistA1 xinetd.d]$ cat EHR-gui
>> > > > > > > > >> > > > > > service EHR-gui
>> > > > > > > > >> > > > > >
>> > > > > > > > >> > > > > > {
>> > > > > > > > >> > > > > > port = 9230
>> > > > > > > > >> > > > > > socket_type = stream
>> > > > > > > > >> > > > > > protocol = tcp
>> > > > > > > > >> > > > > > user = ecloud
>> > > > > > > > >> > > > > > server =
>> > >
>> > > /home/ecloud/Downloads/VistA/EHR-gui
>> > >
>> > > > > > > > >> > > > > > type = UNLISTED
>> > > > > > > > >> > > > > > wait = no
>> > > > > > > > >> > > > > > disable = no
>> > > > > > > > >> > > > > > }
>> > > > > > > > >> > > > > >
>> > > > > > > > >> > > > > > On Mon, Feb 20, 2012 at 5:37 PM, Nancy
>> Anthracite
>> > > > > > > > >> > > > > > <nanthracite@earthlink.net
>> > > > > > > > >> > > > > >
>> > > > > > > > >> > > > > > > wrote:
>> > > > > > > > >> > > > > > >
>> > > > > > > > >> > > > > > > Look at the log file for the xinetd
>> connection
>> > >
>> > > which
>> > >
>> > > > > is
>> > > > >
>> > > > > > > > >> probably
>> > > > > > > > >>
>> > > > > > > > >> > > > > defined
>> > > > > > > > >> > > > >
>> > > > > > > > >> > > > > > > in the "server" code in the xinetd connection
>> > > > > > > > >> > > > > > > file in
>> > > > > > > > >> > >
>> > > > > > > > >> > > /etc/xinetd.d/
>> > > > > > > > >> > >
>> > > > > > > > >> > > > > > > --
>> > > > > > > > >> > > > > > > Nancy Anthracite
>> > > > > > > > >> > > > > > >
>> > > > > > > > >> > > > > > > On Monday, February 20, 2012, Jignesh Patel
>> wrote:
>> > > > > > > > >> > > > > > > > While running Xinetd on FOIA-VistA on gtm
>> we
>> > > > > > > > >> > > > > > > > got
>> > > > > > >
>> > > > > > > following
>> > > > > > >
>> > > > > > > > >> > > > > > > > error.
>> > > > > > > > >> > > > > > > >
>> > > > > > > > >> > > > > > > > "Non-empty value assigned to $ECODE
>> > >
>> > > (user-defined
>> > >
>> > > > > > > > >> > > > > > > > error
>> > > > > > > > >>
>> > > > > > > > >> trap)
>> > > > > > > > >>
>> > > > > > > > >> > > > > > > > At
>> > > > > > > > >> > >
>> > > > > > > > >> > > M
>> > > > > > > > >> > >
>> > > > > > > > >> > > > > > > > source location BREAD+15^XWBRW"
>> > > > > > > > >> > > > > > > >
>> > > > > > > > >> > > > > > > >
>> > > > > > > > >> > > > > > > > Does anybody encounter the same error?
>> > > > > > > > >> > > > > > > >
>> > > > > > > > >> > > > > > > >
>> > > > > > > > >> > > > > > > > -Jignesh
>>
>>
>

like0

error while executing CPRS

Nancy Anthracite's picture

You will not be using this anyway so don't worry about it.

Have you run ^DINIT and can you send me a Fileman inquire into file 14.5, your
volume set file?

--
Nancy Anthracite

On Wednesday, February 22, 2012, Jignesh Patel wrote:
> I also see there is no port defined in RPC broker site parameters
>
> Select RPC BROKER SITE PARAMETERS DOMAIN NAME: VISTA.P
> LATINUM.MED.VA.GOV
> DOMAIN NAME: VISTA.PLATINUM.MED.VA.GOV//
> MAIL GROUP FOR ALERTS:
> Select BOX-VOLUME PAIR: ROU:s1-iCare-VistA1//
> BOX-VOLUME PAIR: ROU:s1-iCare-VistA1//
> Select PORT: 9230
> Are you adding '9230' as a new PORT (the 1ST for this L
> ISTENER)? No// no (No) ??
> Select PORT:
>
> On Wed, Feb 22, 2012 at 12:26 PM, Jignesh Patel
<jigneshmpatel@gmail.com>wrote:
> > Nancy,
> > Here you go
> > UTF8>D ^%G
> >
> > Output device: <terminal>:
> >
> > List ^%ZOSF
> > ^%ZOSF("$INC")=0
> > ^%ZOSF("ACTJ")="S Y=$$ACTJ^%ZOSV()"
> > ^%ZOSF("AVJ")="S Y=$$AVJ^%ZOSV()"
> > ^%ZOSF("BRK")="U $I:(CENABLE)"
> > ^%ZOSF("DEL")="D DEL^%ZOSV2(X) ;N %RD,%OD S %RD=$P($S($ZR
> >
> > O[""("":$P($P($ZRO,""("",2),"")""),1:$ZRO),"" "
> > ")_""/"",%OD=$S($ZRO[""("":$P($ZRO,""("",1)_""/
> > "",1:%RD) ZSYSTEM ""rm -f ""_%RD_X_"".m"" ZSYST
> > EM ""rm -f ""_%OD_X_"".o"""
> >
> > ^%ZOSF("EOFF")="U $I:(NOECHO)"
> > ^%ZOSF("EON")="U $I:(ECHO)"
> > ^%ZOSF("EOT")="S Y=$ZA\1024#2 ; <====="
> > ^%ZOSF("ERRTN")="^%ZTER"
> > ^%ZOSF("ETRP")="Q"
> > ^%ZOSF("GD")="G ^%GD"
> > ^%ZOSF("JOBPARAM")="G JOBPAR^%ZOSV"
> > ^%ZOSF("LABOFF")="U IO:(NOECHO) ; <====="
> > ^%ZOSF("LOAD")="D LOAD^%ZOSV2(X) ;S %N=0 F XCNP=XCNP+1:1
> >
> > S %N=%N+1,%=$T(+%N^@X) Q:$L(%)=0 S @(DIF_XCNP_
> > "",0)"")=%"
> >
> > ^%ZOSF("LPC")="S Y="""" ; <====="
> > ^%ZOSF("MAGTAPE")="S %MT(""BS"")=""*1"",%MT(""FS"")=""*2"
> >
> > ",%MT(""WTM"")=""*3"",%MT(""WB"")=""*4"",%MT(""
> > REW"")=""*5"",%MT(""RB"")=""*6"",%MT(""REL"")="
> > "*7"",%MT(""WHL"")=""*8"",%MT(""WEL"")=""*9"" ;
> >
> > <====="
> >
> > ^%ZOSF("MAXSIZ")="Q"
> > ^%ZOSF("MGR")="VAH,ROU"
> > ^%ZOSF("MTBOT")="S Y=$ZA\32#2 ; <====="
> > ^%ZOSF("MTERR")="S Y=$ZA\32768#2 ; <====="
> > ^%ZOSF("MTONLINE")="S Y=$ZA\64#2 ; <====="
> > ^%ZOSF("MTWPROT")="S Y=$ZA\4#2 ; <====="
> > ^%ZOSF("NBRK")="U $I:(NOCENABLE)"
> > ^%ZOSF("NO-PASSALL")="U $I:(ESCAPE:TERMINATOR="""":NOPAST
> >
> > HRU)"
> >
> > ^%ZOSF("NO-TYPE-AHEAD")="U $I:(NOTYPEAHEAD)"
> > ^%ZOSF("OS")="GT.M (Unix)^19"
> > ^%ZOSF("PASSALL")="U $I:(NOESCAPE:NOTERMINATOR:PASTHRU)"
> > ^%ZOSF("PRIINQ")="S Y=$$PRIINQ^%ZOSV()"
> > ^%ZOSF("PRIORITY")="Q ;G PRIORITY^%ZOSV"
> > ^%ZOSF("PROD")="VAH,ROU"
> > ^%ZOSF("PROGMODE")="S Y=$$PROGMODE^%ZOSV()"
> > ^%ZOSF("RD")="G ^%RD"
> > ^%ZOSF("RESJOB")="Q:'$D(DUZ) Q:'$D(^XUSEC(""XUMGR"",+DUZ
> >
> > )) N XQZ S XQZ=""^FORCEX[MGR]"" D DO^%XUCI ; <
> > ====="
> >
> > ^%ZOSF("RM")="U $I:WIDTH=$S(X<256:X,1:0)"
> > ^%ZOSF("RSEL")="K ^UTILITY($J) D ^%RSEL S X="""" X ""F S
> >
> > X=$O(%ZR(X)) Q:X="""""""" S ^UTILITY($J,X)=""
> >
> > """""""" K %ZR"
> >
> > ^%ZOSF("RSUM")="S Y=0 F %=1,3:1 S %1=$T(+%^@X),%3=$F(%1,"
> >
> > " "") Q:'%3 S %3=$S($E(%1,%3)'="";"":$L(%1),$E
> > (%1,%3+1)="";"":$L(%1),1:%3-2) F %2=1:1:%3 S Y=
> > $A(%1,%2)*%2+Y"
> >
> > ^%ZOSF("RSUM1")="N %,%1,%2,%3 S Y=0 F %=1,3:1 S %1=$T(+%^
> >
> > @X),%3=$F(%1,"" "") Q:'%3 S %3=$S($E(%1,%3)'="
> > ";"":$L(%1),$E(%1,%3+1)="";"":$L(%1),1:%3-2) F
> > %2=1:1:%3 S Y=$A(%1,%2)*(%2+%)+Y"
> >
> > ^%ZOSF("SAVE")="D SAVE^%ZOSV2(X) ;N %I,%F S %I=$I,%F=$P($
> >
> > S($ZRO[""("":$P($P($ZRO,""("",2),"")""),1:$ZRO)
> > ,"" "")_""/""_X_"".m"" O %F:(NEWVERSION) U %F X
> >
> > ""F S XCN=$O(@(DIE_XCN_"""")"""")) Q:+XCN'=XC
> >
> > N S %=@(DIE_XCN_"""",0)"""") Q:$E(%,1)=""""$""
> > "" I $E(%)'="""";"""" W %,!"" C %F U %I"
> >
> > ^%ZOSF("SIZE")="S Y=0 F I=1:1 S %=$T(+I) Q:%="""" S Y=Y+
> >
> > $L(%)+2 ; <====="
> >
> > ^%ZOSF("SS")="D ^ZSY"
> > ^%ZOSF("TEST")="I X]"""",$T(^@X)]"""""
> > ^%ZOSF("TMK")="S Y=$ZA\16384#2"
> > ^%ZOSF("TMP")="/tmp/"
> > ^%ZOSF("TRAP")="$ZT=""G ""_X"
> > ^%ZOSF("TRMOFF")="U $I:(TERMINATOR="""")"
> > ^%ZOSF("TRMON")="U $I:(TERMINATOR=$C(0,1,2,3,4,5,6,7,8,9,
> >
> > 10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25
> > ,26,27,28,29,30,31,127))"
> >
> > ^%ZOSF("TRMRD")="S Y=$A($ZB)"
> > ^%ZOSF("TYPE-AHEAD")="U $I:(TYPEAHEAD)"
> > ^%ZOSF("UCI")="S Y=^%ZOSF(""PROD"")"
> > ^%ZOSF("UCICHECK")="S Y=1"
> > ^%ZOSF("UPPERCASE")="S Y=$TR(X,""abcdefghijklmnopqrstuvwx
> >
> > yz"",""ABCDEFGHIJKLMNOPQRSTUVWXYZ"")"
> >
> > ^%ZOSF("VOL")="ROU"
> > ^%ZOSF("XY")="S $X=DX,$Y=DY ; <====="
> > ^%ZOSF("ZD")="S Y=$$HTE^XLFDT(X,2) I $L($P(Y,""/""))=1 S
> >
> > Y=0_
> >
> > I have created another volume set as I was not seeing ROU. Now I want to
> > delete the Volume Set FOI how to do that? Or it doesn't matter.
> >
> > Select VOLUME SET: ?
> >
> > Answer with VOLUME SET
> >
> > Choose from:
> > FOI
> > ROU
> >
> > You may enter a new VOLUME SET, if you wish
> > Answer must be 3-30 characters in length.
> >
> > Select VOLUME SET: ROU
> > VOLUME SET: ROU//
> > TYPE: GENERAL PURPOSE VOLUME SET//
> > INHIBIT LOGONS?: NO//
> > LINK ACCESS?: NO//
> > OUT OF SERVICE?: NO//
> > REQUIRED VOLUME SET?: NO//
> > TASKMAN FILES UCI: VAH//
> > TASKMAN FILES VOLUME SET: ROU//
> > REPLACEMENT VOLUME SET:
> > DAYS TO KEEP OLD TASKS: 4//
> > SIGNON/PRODUCTION VOLUME SET: Yes//
> > RE-QUEUES BEFORE UN-SCHEDULE: 12//
> >
> > On Wed, Feb 22, 2012 at 12:13 PM, Nancy Anthracite <
> >
> > nanthracite@earthlink.net> wrote:
> >> Well, not too bad anyway. Let's kill off FOI:FOIISCSVR, but first show
> >> me a
> >> Fileman inquire on the RPC Broker site parameters file and then D ^%G
> >> and list
> >> %ZOSF for me.
> >>
> >> --
> >> Nancy Anthracite
> >>
> >> On Wednesday, February 22, 2012, Jignesh Patel wrote:
> >> > Here is out of D ^ZTMON
> >> >
> >> > Checking Taskman. Current $H=62509,61341 (Feb 22, 2012@17:02:21)
> >> >
> >> > RUN NODE=62509,61332 (Feb 22, 2012@17:02:12)
> >> >
> >> > Taskman is current..
> >> >
> >> > Checking the Status List:
> >> > Node weight status time $J
> >> >
> >> > ROU:s1-iCare-VistA1 RUN T@17:02:12 26684 Main Loop
> >> >
> >> > Checking the Schedule List:
> >> > Taskman has no tasks scheduled.
> >> >
> >> > Checking the IO Lists: Last TM scan: 2 sec,
> >> >
> >> > There are no tasks waiting for devices.
> >> >
> >> > Checking the Job List:
> >> > There are no tasks waiting for partitions.
> >> >
> >> > Checking the Task List:
> >> > There are no tasks currently running.
> >> >
> >> > Checking Sub-Managers:
> >> > On node FOI:FOIISCSVR there are no free Sub-Manager(s). Status:
> >> > Run On node ROU:s1-iCare-VistA1 there are 4 free
> >> > Sub-Manager(s).
> >>
> >> Status:
> >> > Run
> >> >
> >> > Enter monitor action: UPDATE//
> >> >
> >> >
> >> > Also when I tried to check Volume it shows me
> >> > Select VOLUME SET: ?
> >> >
> >> > Answer with VOLUME SET:
> >> > FOI
> >> >
> >> > You may enter a new VOLUME SET, if you wish
> >> > Answer must be 3-30 characters in length.
> >> >
> >> > However my Volume is ROU.
> >> >
> >> > And
> >> >
> >> > UTF8>D GETENV^%ZOSV W Y
> >> >
> >> > VAH^ROU^s1-iCare-VistA1^ROU:s1-iCare-VistA1
> >> >
> >> >
> >> > On Wed, Feb 22, 2012 at 11:52 AM, Nancy Anthracite <
> >> >
> >> > nanthracite@earthlink.net> wrote:
> >> > > From the " ,ROU", I am not sure it is right. Show me what you get
> >>
> >> with
> >>
> >> > > D ^ZTMON.
> >> > >
> >> > > --
> >> > > Nancy Anthracite
> >> > >
> >> > > On Wednesday, February 22, 2012, Jignesh Patel wrote:
> >> > > > Nancy,
> >> > > > I did run ZTMGRSET and ZUSET but not DINIT.
> >> > > >
> >> > > > -Jignesh
> >> > > >
> >> > > > On Wed, Feb 22, 2012 at 11:46 AM, Nancy Anthracite <
> >> > > >
> >> > > > nanthracite@earthlink.net> wrote:
> >> > > > > Did you run ^ZTMGRSET and ^DINIT and ^ZUSET and set up the
> >> > > > > Taskman site parameters and all of your devices, etc?
> >> > > > >
> >> > > > > --
> >> > > > > Nancy Anthracite
> >> > > > >
> >> > > > > On Wednesday, February 22, 2012, Jignesh Patel wrote:
> >> > > > > > May be because I don't have task man running. See below:
> >> > > > > >
> >> > > > > > I tried to check TASKMAN and found
> >> > > > > >
> >> > > > > > Operating System: GT.M (Unix)
> >> > > > > > Volume Set: ROU
> >> > > > > > Cpu-volume Pair: ROU:s1-iCare-VistA1
> >> > > > > > TaskMan Files UCI and Volume Set: ,ROU
> >> > > > > >
> >> > > > > > Seems there is no UCI setup. Is that a problem?
> >> > > > > >
> >> > > > > >
> >> > > > > > And My task man is not running
> >> > > > > > hecking Taskman. Current $H=62509,59871 (Feb 22, 2012@16
> >> :
> >> :37:51)
> >> :
> >> > > > > > RUN NODE=<Undefined>
> >> > > > > >
> >> > > > > > Taskman is shutting down not running..
> >> > > > > >
> >> > > > > > Checking the Status List:
> >> > > > > > Node weight status time $J
> >> > > > > >
> >> > > > > > The Status List is empty.
> >> > > > > >
> >> > > > > > Checking the Schedule List:
> >> > > > > > Taskman has no tasks scheduled.
> >> > > > > >
> >> > > > > > Checking the IO Lists: Last TM scan: 172947 sec,
> >> > > > > >
> >> > > > > > There are no tasks waiting for devices.
> >> > > > > >
> >> > > > > > Checking the Job List:
> >> > > > > > There are no tasks waiting for partitions.
> >> > > > > >
> >> > > > > > Checking the Task List:
> >> > > > > > There are no tasks currently running.
> >> > > > > >
> >> > > > > > Checking Sub-Managers:
> >> > > > > > On node FOI:FOIISCSVR there are no free Sub-Manager(s).
> >> > > > > > Status: Stop On node ROU:s1-iCare-VistA1 there are no
> >> > > > > > free Sub-Manager(s).
> >> > > > >
> >> > > > > Status:
> >> > > > > > Stop
> >> > > > > >
> >> > > > > > On Wed, Feb 22, 2012 at 11:29 AM, Nancy Anthracite <
> >> > > > > >
> >> > > > > > nanthracite@earthlink.net> wrote:
> >> > > > > > > That log is usually a pretty verbose log and you are
> >>
> >> apparently
> >>
> >> > > > > > > not
> >> > > > >
> >> > > > > even
> >> > > > >
> >> > > > > > > getting much past square one. It has very little to say.
> >> > > > > > > Did
> >>
> >> you
> >>
> >> > > > > > > pick the very verbose option, #3?
> >> > > > > > >
> >> > > > > > > Do be sure you have a null device set up correctly as that
> >> > > > > > > is
> >>
> >> a
> >>
> >> > > > > > > common reason
> >> > > > > > > for a crash and burn, but it usually gives a a different
> >>
> >> error.
> >>
> >> > > > > > > --
> >> > > > > > > Nancy Anthracite
> >> > > > > > >
> >> > > > > > > On Wednesday, February 22, 2012, Jignesh Patel wrote:
> >> > > > > > > > I see following in the log
> >> > > > > > > >
> >> > > > > > > > Log from Job 30930 2 Lines
> >> > > > > > > > 15:57:38 = Log start: Feb 22, 2012@15:57:38
> >> > > > > > > > 15:57:38 = XWBTCPM
> >> > > > > > > >
> >> > > > > > > > Log from Job 31002 2 Lines
> >> > > > > > > > 15:57:48 = Log start: Feb 22, 2012@15:57:48
> >> > > > > > > > 15:57:48 = XWBTCPM
> >> > > > > > > >
> >> > > > > > > > Log from Job 31038 2 Lines
> >> > > > > > > > 15:57:53 = Log start: Feb 22, 2012@15:57:53
> >> > > > > > > > 15:57:53 = XWBTCPM
> >> > > > > > > >
> >> > > > > > > > On Wed, Feb 22, 2012 at 10:55 AM, Jignesh Patel
> >> > > > > > >
> >> > > > > > > <jigneshmpatel@gmail.com>wrote:
> >> > > > > > > > > Nancy.
> >> > > > > > > > > Sorry I slept let yesterday. I have implemented the step
> >>
> >> you
> >>
> >> > > did
> >> > >
> >> > > > > > > > > mention.I have enabled RPC broker debug.
> >> > > > > > > > >
> >> > > > > > > > > Now what I need to do?
> >> > > > > > > > >
> >> > > > > > > > >
> >> > > > > > > > > On Wed, Feb 22, 2012 at 6:55 AM, Nancy Anthracite <
> >> > > > > > > > >
> >> > > > > > > > > nanthracite@earthlink.net> wrote:
> >> > > > > > > > >> Well, I understand there is a bug in the code so the
> >>
> >> error
> >>
> >> > > trap
> >> > >
> >> > > > > does
> >> > > > >
> >> > > > > > > not
> >> > > > > > >
> >> > > > > > > > >> work
> >> > > > > > > > >> right so it is hard to know.
> >> > > > > > > > >>
> >> > > > > > > > >> I have done a port of the FOIA from 12-6-11 and CPRS is
> >> > > > > > > > >> connecting OK
> >> > > > > > >
> >> > > > > > > so
> >> > > > > > >
> >> > > > > > > > >> I don't know what to say until the error trap is
> >> > > > > > > > >> working, and then it will probably take someone else
> >> > > > > > > > >> to say.
> >> > > > > > > > >>
> >> > > > > > > > >> But, we might glean something from the debugger for the
> >> > >
> >> > > broker.
> >> > >
> >> > > > > > > > >> Do the following and then try to connect and see what
> >> > > > > > > > >> you get
> >> > >
> >> > > in
> >> > >
> >> > > > > the
> >> > > > >
> >> > > > > > > log
> >> > > > > > >
> >> > > > > > > > >> when
> >> > > > > > > > >> you run the View XWB Log option.
> >> > > > > > > > >>
> >> > > > > > > > >>
> >> > > > > > > > >>
> >> > > > > > > > >> GTM>S DUZ=1 D ^XUP
> >> > > > > > > > >>
> >> > > > > > > > >> Setting up programmer environment
> >> > > > > > > > >> This is a TEST account.
> >> > > > > > > > >>
> >> > > > > > > > >> Terminal Type set to: C-VT220
> >> > > > > > > > >>
> >> > > > > > > > >> Select OPTION NAME: eve
> >> > > > > > > > >>
> >> > > > > > > > >> 1 EVE Systems Manager Menu
> >> > > > > > > > >> 2 EVENT CAPTURE ECX ECS MAINTENANCE Event
> >>
> >> Capture
> >>
> >> > > > > > > > >> 3 EVENT CAPTURE (ECS) EXTRACT AU ECX ECS SOURCE
> >>
> >> AUDIT
> >>
> >> > > > > > > > >> Event
> >> > > > > > > > >>
> >> > > > > > > > >> Capture
> >> > > > > > > > >> (ECS) Extract Audit
> >> > > > > > > > >>
> >> > > > > > > > >> 4 EVENT CAPTURE DATA ENTRY ECENTER Event
> >>
> >> Capture
> >>
> >> > > Data
> >> > >
> >> > > > > > > > >> Entry 5 EVENT CAPTURE EXTRACT ECXEC Event
> >>
> >> Capture
> >>
> >> > > > > > > > >> Extract
> >> > > > > > > > >>
> >> > > > > > > > >> Press <RETURN> to see more, '^' to exit this list, OR
> >> > > > > > > > >> CHOOSE 1-5: 1 EVE Systems Manager Menu
> >> > > > > > > > >>
> >> > > > > > > > >> Core Applications ...
> >> > > > > > > > >> Device Management ...
> >> > > > > > > > >> Menu Management ...
> >> > > > > > > > >> Programmer Options ...
> >> > > > > > > > >> Operations Management ...
> >> > > > > > > > >> Spool Management ...
> >> > > > > > > > >> Information Security Officer Menu ...
> >> > > > > > > > >> Taskman Management ...
> >> > > > > > > > >> User Management ...
> >> > > > > > > > >> Application Utilities ...
> >> > > > > > > > >> Capacity Planning ...
> >> > > > > > > > >> HL7 Main Menu ...
> >> > > > > > > > >>
> >> > > > > > > > >> You have PENDING ALERTS
> >> > > > > > > > >>
> >> > > > > > > > >> Enter "VA to jump to VIEW ALERTS option
> >> > > > > > > > >>
> >> > > > > > > > >> Select Systems Manager Menu Option: operations
> >> > > > > > > > >> Management
> >> > > > > > > > >>
> >> > > > > > > > >> System Status
> >> > > > > > > > >> Introductory text edit
> >> > > > > > > > >> CPU/Service/User/Device Stats
> >> > > > > > > > >>
> >> > > > > > > > >> RJD Kill off a users' job
> >> > > > > > > > >>
> >> > > > > > > > >> Alert Management ...
> >> > > > > > > > >> Alpha/Beta Test Option Usage Menu ...
> >> > > > > > > > >> Clean old Job Nodes in XUTL
> >> > > > > > > > >> Delete Old (>14 d) Alerts
> >> > > > > > > > >> Foundations Management
> >> > > > > > > > >> Kernel Management Menu ...
> >> > > > > > > > >> Post sign-in Text Edit
> >> > > > > > > > >> RPC Broker Management Menu ...
> >> > > > > > > > >> User Management Menu ...
> >> > > > > > > > >>
> >> > > > > > > > >> You have PENDING ALERTS
> >> > > > > > > > >>
> >> > > > > > > > >> Enter "VA to jump to VIEW ALERTS option
> >> > > > > > > > >>
> >> > > > > > > > >> Select Operations Management Option: rpc Broker
> >>
> >> Management
> >>
> >> > > Menu
> >> > >
> >> > > > > > > > >> RPC Listener Edit
> >> > > > > > > > >> Start All RPC Broker Listeners
> >> > > > > > > > >> Stop All RPC Broker Listeners
> >> > > > > > > > >> Clear XWB Log Files
> >> > > > > > > > >> Debug Parameter Edit
> >> > > > > > > > >> View XWB Log
> >> > > > > > > > >>
> >> > > > > > > > >> You have PENDING ALERTS
> >> > > > > > > > >>
> >> > > > > > > > >> Enter "VA to jump to VIEW ALERTS option
> >> > > > > > > > >>
> >> > > > > > > > >> Select RPC Broker Management Menu Option: debug
> >> > > > > > > > >> Parameter Edit
> >> > > > > > > > >>
> >> > > > > > > > >>
> >> > > > > > > > >>
> >> > > > > > > > >> ----- Setting RPCBroker debug logging for System:
> >> > > > > > > > >> FOIA.PLATINUM.VA.GOV----- Enable Broker Logging: 3
> >> > > > > > > > >> very
> >> > >
> >> > > Verbose
> >> > >
> >> > > > > > > > >> RPC Listener Edit
> >> > > > > > > > >> Start All RPC Broker Listeners
> >> > > > > > > > >> Stop All RPC Broker Listeners
> >> > > > > > > > >> Clear XWB Log Files
> >> > > > > > > > >> Debug Parameter Edit
> >> > > > > > > > >> View XWB Log
> >> > > > > > > > >>
> >> > > > > > > > >> You have PENDING ALERTS
> >> > > > > > > > >>
> >> > > > > > > > >> Enter "VA to jump to VIEW ALERTS option
> >> > > > > > > > >>
> >> > > > > > > > >> Select RPC Broker Management Menu Option:
> >> > > > > > > > >>
> >> > > > > > > > >> --
> >> > > > > > > > >> Nancy Anthracite
> >> > > > > > > > >>
> >> > > > > > > > >> On Wednesday, February 22, 2012, Jignesh Patel wrote:
> >> > > > > > > > >> > Nancy,
> >> > > > > > > > >> > I see following;
> >> > > > > > > > >> >
> >> > > > > > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> >> > > > >
> >> > > > > (user-defined
> >> > > > >
> >> > > > > > > > >> > error trap)
> >> > > > > > > > >> > At M source location BREAD+15^XWBRW
> >> > > > > > > > >> > Wed Feb 22 05:29:38 GMT 2012
> >> > > > > > > > >> > LANG=en_US.UTF-8
> >> > > > > > > > >> > LC_CTYPE="en_US.UTF-8"
> >> > > > > > > > >> > LC_NUMERIC="en_US.UTF-8"
> >> > > > > > > > >> > LC_TIME="en_US.UTF-8"
> >> > > > > > > > >> > LC_COLLATE="en_US.UTF-8"
> >> > > > > > > > >> > LC_MONETARY="en_US.UTF-8"
> >> > > > > > > > >> > LC_MESSAGES="en_US.UTF-8"
> >> > > > > > > > >> > LC_PAPER="en_US.UTF-8"
> >> > > > > > > > >> > LC_NAME="en_US.UTF-8"
> >> > > > > > > > >> > LC_ADDRESS="en_US.UTF-8"
> >> > > > > > > > >> > LC_TELEPHONE="en_US.UTF-8"
> >> > > > > > > > >> > LC_MEASUREMENT="en_US.UTF-8"
> >> > > > > > > > >> > LC_IDENTIFICATION="en_US.UTF-8"
> >> > > > > > > > >> > LC_ALL=en_US.UTF-8
> >> > > > > > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> >> > > > >
> >> > > > > (user-defined
> >> > > > >
> >> > > > > > > > >> > error trap)
> >> > > > > > > > >> > At M source location BREAD+15^XWBRW
> >> > > > > > > > >> > Wed Feb 22 05:29:43 GMT 2012
> >> > > > > > > > >> > LANG=en_US.UTF-8
> >> > > > > > > > >> > LC_CTYPE="en_US.UTF-8"
> >> > > > > > > > >> > LC_NUMERIC="en_US.UTF-8"
> >> > > > > > > > >> > LC_TIME="en_US.UTF-8"
> >> > > > > > > > >> > LC_COLLATE="en_US.UTF-8"
> >> > > > > > > > >> > LC_MONETARY="en_US.UTF-8"
> >> > > > > > > > >> > LC_MESSAGES="en_US.UTF-8"
> >> > > > > > > > >> > LC_PAPER="en_US.UTF-8"
> >> > > > > > > > >> > LC_NAME="en_US.UTF-8"
> >> > > > > > > > >> > LC_ADDRESS="en_US.UTF-8"
> >> > > > > > > > >> > LC_TELEPHONE="en_US.UTF-8"
> >> > > > > > > > >> > LC_MEASUREMENT="en_US.UTF-8"
> >> > > > > > > > >> > LC_IDENTIFICATION="en_US.UTF-8"
> >> > > > > > > > >> > LC_ALL=en_US.UTF-8
> >> > > > > > > > >> > %GTM-E-SETECODE, Non-empty value assigned to $ECODE
> >> > > > >
> >> > > > > (user-defined
> >> > > > >
> >> > > > > > > > >> > error trap)
> >> > > > > > > > >> > At M source location BREAD+15^XWBRW
> >> > > > > > > > >> >
> >> > > > > > > > >> > On Tue, Feb 21, 2012 at 10:36 PM, Nancy Anthracite <
> >> > > > > > > > >> >
> >> > > > > > > > >> > nanthracite@earthlink.net> wrote:
> >> > > > > > > > >> > > If that
> >>
> >> 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log
> >>
> >> > > > > > > > >> > > is
> >> > > > > > >
> >> > > > > > > actually
> >> > > > > > >
> >> > > > > > > > >> > > on the same line as the line above it in the email,
> >>
> >> what
> >>
> >> > > are
> >> > >
> >> > > > > you
> >> > > > >
> >> > > > > > > > >> > > seeing
> >> > > > > > > > >>
> >> > > > > > > > >> in
> >> > > > > > > > >>
> >> > > > > > > > >> > > /home/ecloud/Downloads/VistA/log/EHR-gui.log?
> >> > > > > > > > >> > >
> >> > > > > > > > >> > > --
> >> > > > > > > > >> > > Nancy Anthracite
> >> > > > > > > > >> > >
> >> > > > > > > > >> > > On Tuesday, February 21, 2012, you wrote:
> >> > > > > > > > >> > > > Nancy,
> >> > > > > > > > >> > > >
> >> > > > > > > > >> > > > Here you go. The locale information is being
> >> > > > > > > > >> > > > placed into the
> >> > > > > > > > >>
> >> > > > > > > > >> EHR-gui to
> >> > > > > > > > >>
> >> > > > > > > > >> > > > make sure it should be taken as somehow GT.M was
> >> > >
> >> > > ignoring
> >> > >
> >> > > > > > > > >> > > > UTF-8
> >>
> >> ------------------------------------------------------------------------
> >>
> >> > > > > > > > >> -
> >> > > > > > > > >>
> >> > > > > > > > >> > > --
> >> > > > > > > > >> > >
> >> > > > > > > > >> > > > ---------------------------------------
> >> > > > > > > > >> > > > #!/bin/bash #EHR-gui: This is a file to run
> >> > > > > > > > >> > > > RPCBroker as a
> >>
> >> Linux
> >>
> >> > > > > > > > >> > > > service #make sure of our directory
> >> > > > > > > > >> > > > cd /home/ecloud/Downloads/VistA
> >> > > > > > > > >> > > > date >>
> >>
> >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
> >>
> >> > > > > > > > >> > > > #Get the GTM profile
> >> > > > > > > > >> > > > source /etc/profile.d/gtmprofile.sh
> >> > > > > > > > >> > > > #set locale
> >> > > > > > > > >> > > > export LANG=en_US.UTF-8
> >> > > > > > > > >> > > > export LC_CTYPE=en_US.UTF-8
> >> > > > > > > > >> > > > export LC_NUMERIC="en_US.UTF-8"
> >> > > > > > > > >> > > > export LC_TIME="en_US.UTF-8"
> >> > > > > > > > >> > > > export LC_COLLATE="en_US.UTF-8"
> >> > > > > > > > >> > > > export LC_MONETARY="en_US.UTF-8"
> >> > > > > > > > >> > > > export LC_MESSAGES="en_US.UTF-8"
> >> > > > > > > > >> > > > export LC_PAPER="en_US.UTF-8"
> >> > > > > > > > >> > > > export LC_NAME="en_US.UTF-8"
> >> > > > > > > > >> > > > export LC_ADDRESS="en_US.UTF-8"
> >> > > > > > > > >> > > > export LC_TELEPHONE="en_US.UTF-8"
> >> > > > > > > > >> > > > export LC_MEASUREMENT="en_US.UTF-8"
> >> > > > > > > > >> > > > export LC_IDENTIFICATION="en_US.UTF-8"
> >> > > > > > > > >> > > > export LC_ALL=en_US.UTF-8
> >> > > > > > > > >> > > > locale >>
> >>
> >> /home/ecloud/Downloads/VistA/log/EHR-gui.log
> >>
> >> > > > > > > > >> > > > #Run routine
> >> > > > > > > > >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
> >> > > > > > > > >> > > > 2>>/home/ecloud/Downloads/VistA/log/EHR-gui.log
> >>
> >> ------------------------------------------------------------------------
> >>
> >> > > > > > > > >> -
> >> > > > > > > > >>
> >> > > > > > > > >> > > --
> >> > > > > > > > >> > >
> >> > > > > > > > >> > > > ----------------------------------
> >> > > > > > > > >> > > >
> >> > > > > > > > >> > > > When I run from command line
> >> > > > > > > > >> > > >
> >> > > > > > > > >> > > > $gtm_dist/mumps -run GTMLNX^XWBTCPM
> >> > > > > > > > >> > > > %GTM-E-SETECODE, Non-empty value assigned to
> >> > > > > > > > >> > > > $ECODE
> >> > > > > > >
> >> > > > > > > (user-defined
> >> > > > > > >
> >> > > > > > > > >> error
> >> > > > > > > > >>
> >> > > > > > > > >> > > > trap)
> >> > > > > > > > >> > > > At M source location BREAD+15^XWBRW
> >> > > > > > > > >> > > >
> >> > > > > > > > >> > > > UTF8>
> >> > > > > > > > >> > > >
> >> > > > > > > > >> > > >
> >> > > > > > > > >> > > >
> >> > > > > > > > >> > > >
> >> > > > > > > > >> > > > -Jignesh
> >> > > > > > > > >> > > >
> >> > > > > > > > >> > > > On Tue, Feb 21, 2012 at 7:33 PM, Nancy Anthracite
> >> > > > > > > > >> > > > <nanthracite@earthlink.net
> >> > > > > > > > >> > > >
> >> > > > > > > > >> > > > > wrote:
> >> > > > > > > > >> > > > >
> >> > > > > > > > >> > > > > Now show me the contents of the file
> >> > > > > > > > >> > >
> >> > > > > > > > >> > > /home/ecloud/Downloads/VistA/EHR-gui
> >> > > > > > > > >> > >
> >> > > > > > > > >> > > > > --
> >> > > > > > > > >> > > > > Nancy Anthracite
> >> > > > > > > > >> > > > >
> >> > > > > > > > >> > > > > On Tuesday, February 21, 2012, Jignesh Patel
> >>
> >> wrote:
> >> > > > > > > > >> > > > > > Nancy are you talking about this file.
> >> > > > > > > > >> > > > > > [ecloud@s1-iCare-VistA1 xinetd.d]$ cat
> >> > > > > > > > >> > > > > > EHR-gui service EHR-gui
> >> > > > > > > > >> > > > > >
> >> > > > > > > > >> > > > > > {
> >> > > > > > > > >> > > > > > port = 9230
> >> > > > > > > > >> > > > > > socket_type = stream
> >> > > > > > > > >> > > > > > protocol = tcp
> >> > > > > > > > >> > > > > > user = ecloud
> >> > > > > > > > >> > > > > > server =
> >> > >
> >> > > /home/ecloud/Downloads/VistA/EHR-gui
> >> > >
> >> > > > > > > > >> > > > > > type = UNLISTED
> >> > > > > > > > >> > > > > > wait = no
> >> > > > > > > > >> > > > > > disable = no
> >> > > > > > > > >> > > > > > }
> >> > > > > > > > >> > > > > >
> >> > > > > > > > >> > > > > > On Mon, Feb 20, 2012 at 5:37 PM, Nancy
> >>
> >> Anthracite
> >>
> >> > > > > > > > >> > > > > > <nanthracite@earthlink.net
> >> > > > > > > > >> > > > > >
> >> > > > > > > > >> > > > > > > wrote:
> >> > > > > > > > >> > > > > > >
> >> > > > > > > > >> > > > > > > Look at the log file for the xinetd
> >>
> >> connection
> >>
> >> > > which
> >> > >
> >> > > > > is
> >> > > > >
> >> > > > > > > > >> probably
> >> > > > > > > > >>
> >> > > > > > > > >> > > > > defined
> >> > > > > > > > >> > > > >
> >> > > > > > > > >> > > > > > > in the "server" code in the xinetd
> >> > > > > > > > >> > > > > > > connection file in
> >> > > > > > > > >> > >
> >> > > > > > > > >> > > /etc/xinetd.d/
> >> > > > > > > > >> > >
> >> > > > > > > > >> > > > > > > --
> >> > > > > > > > >> > > > > > > Nancy Anthracite
> >> > > > > > > > >> > > > > > >
> >> > > > > > > > >> > > > > > > On Monday, February 20, 2012, Jignesh Patel
> >>
> >> wrote:
> >> > > > > > > > >> > > > > > > > While running Xinetd on FOIA-VistA on gtm
> >>
> >> we
> >>
> >> > > > > > > > >> > > > > > > > got
> >> > > > > > >
> >> > > > > > > following
> >> > > > > > >
> >> > > > > > > > >> > > > > > > > error.
> >> > > > > > > > >> > > > > > > >
> >> > > > > > > > >> > > > > > > > "Non-empty value assigned to $ECODE
> >> > >
> >> > > (user-defined
> >> > >
> >> > > > > > > > >> > > > > > > > error
> >> > > > > > > > >>
> >> > > > > > > > >> trap)
> >> > > > > > > > >>
> >> > > > > > > > >> > > > > > > > At
> >> > > > > > > > >> > >
> >> > > > > > > > >> > > M
> >> > > > > > > > >> > >
> >> > > > > > > > >> > > > > > > > source location BREAD+15^XWBRW"
> >> > > > > > > > >> > > > > > > >
> >> > > > > > > > >> > > > > > > >
> >> > > > > > > > >> > > > > > > > Does anybody encounter the same error?
> >> > > > > > > > >> > > > > > > >
> >> > > > > > > > >> > > > > > > >
> >> > > > > > > > >> > > > > > > > -Jignesh

like0