Successfully installed VistA (via OSEHRA/VAGRANT)... Need help w/CONFIG

Hi:

I have successfully
1) installed OSEHRA VistA on Linux (via VAGRANT),
2) started VistA (with VAGRANT UP) AND
3) set up a link to VistA/VAGRANT via terminal command: sh -p 2222
osehratied@localhost

step 3) results in the error message:
--------------------------
%GTM-E-ZLINKFILE, Error while zlinking "ZU"
%GTM-E-FILENOTFND, File ZU not found
Connection to localhost closed.
-------------------------------
It appears that ZU is not created or configured.

I can successfully link to prog: (sh -p 2222 osehraprog@localhost ) and get
prompt
OSEHRA>:

Please point me to a solution or documentation that will help in this
instance.

Please confirm receipt of this email.

Thanks,
Nick

like0

Comments

Hi Nick,

Joseph Snyder's picture

Hi Nick,

Thanks for your post.  We will do some exploring here to try to replicate your problem and will get back to you soon.   I am assuming this was on an Vagrant VM where the guest VM is running Ubuntu, is that correct?

- Joe

like0

troubleshooting steps

Christopher Edwards's picture

Nick

I hope this e-mail finds you as there doesn't seem to a non-osehra admin e-mail associated with your request

I assume your commands are ssh -p instead of sh -p. ssh and sh are two very different commands, you should be using ssh -p.

if the osehraprog user works for you can you give the results of ZP ^ZU?

You may also want to make sure that the routine actually exists and doesn't have a permissions issue:

login as the vagrant user (vagrant ssh will work) and type ls -l /home/osehra/r/ZU.m

like0

Works fine locally

Christopher Edwards's picture

Nick:

I just ran through a build last night and everything built correctly and i'm able to login:

cedwards@macbook02:~/Projects/osehra/VistA/Scripts/Install/Ubuntu
(git) 1706c7f U master [origin/master]
% ssh -p 2204 osehratied@localhost
The authenticity of host '[localhost]:2204 ([127.0.0.1]:2204)' can't be established.
RSA key fingerprint is cd:a3:76:9c:b8:b5:bc:d8:5c:e1:ce:79:bf:71:cd:5f.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '[localhost]:2204' (RSA) to the list of known hosts.
osehratied@localhost's password:
Welcome to Ubuntu 12.04.5 LTS (GNU/Linux 3.2.0-104-virtual x86_64)

 * Documentation:  https://help.ubuntu.com/

  System information as of Tue Jul 19 12:29:05 UTC 2016

  System load:  0.0                Processes:           82
  Usage of /:   27.4% of 39.37GB   Users logged in:     0
  Memory usage: 54%                IP address for eth0: 10.0.2.15
  Swap usage:   0%

  Graph this data and manage this system at:
    https://landscape.canonical.com/

  Get cloud support with Ubuntu Advantage Cloud Guest:
    http://www.ubuntu.com/business/services/cloud

New release '14.04.4 LTS' available.
Run 'do-release-upgrade' to upgrade to it.

 

*** System restart required ***

The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.

NEW SYSTEM 304-262-7078

 

Volume set: PLA:  UCI: PLA  Device: /dev/pts/1

ACCESS CODE: ********
VERIFY CODE: ********

Good afternoon ALEXANDER,ROBERT
     You last signed on yesterday at 20:08

Select Core Applications <TEST ACCOUNT> Option:

Do you really want to halt? YES//

If you have a log of the vagrant up that may help to find the error.

like0

Successfully installed VistA (via OSEHRA/VAGRANT)... Need...

Nicholas Booth's picture

Hi Christopher/Joseph:

Thanks for the quick reply!
My reposes are intertwined with your email.
According to my findings for your requests below, my ZU.m routine does
not exist (the /home/osehra/r directory exists)
My guess is I have an incomplete install.
a) I do not recall specifically installing routines. Is there a
separate step for installing M routines. For reference, I used
installation web page:
https://www.osehra.org/content/how-setup-osehra-vista-development-virtua...
b) I have 2 installations that have been installed over a week ago. Were
there install script updates since then? if there were updates, should
I re-install?
c) I have not used or configured CPRS... I only have used local
terminal window to successful login via ssh and poke around GTM-E prompt
(rollnscroll ?) interface

Thanks,
Nick

On 07/18/2016 03:48 PM, Christopher Edwards wrote:
>
> Nick
>
> I hope this e-mail finds you as there doesn't seem to a non-osehra
> admin e-mail associated with your request
>
> I assume your commands are ssh -p instead of sh -p. ssh and sh are two
> very different commands, you should be using ssh -p.
>
I am using SSH
>
> if the osehraprog user works for you can you give the results of ZP ^ZU?
>
OSEHRA> ZP ^ ZU
results :
%GTM-E-ZLINKFILE, Error while zlinking "ZU"
%GTM-E-FILENOTFND, File ZU not found

It appears GTM-E is complaining that a ZU routine file is not found.
>
> You may also want to make sure that the routine actually exists and
> doesn't have a permissions issue:
>
> login as the vagrant user (vagrant ssh will work) and type ls -l
> /home/osehra/r/ZU.m
>
Using vagrant ssh shell, I attempted to get directory of ZU routine
... I walked the tree to make sure it existed...
vagrant@vagrant-ubuntu-precise-64:~$ ls /home
osehra ubuntu vagrant
vagrant@vagrant-ubuntu-precise-64:~$ ls /home/osehra
backup bin etc ewdjs g j lib log p r s tmp www
vagrant@vagrant-ubuntu-precise-64:~$ ls /home/osehra/r
V6.2-000_x86_64
vagrant@vagrant-ubuntu-precise-64:~$ ls /home/osehra/r/V6.2-000_x86_64
vagrant@vagrant-ubuntu-precise-64:~$ ls /home/osehra/r/ZU.m
ls: cannot access /home/osehra/r/ZU.m: No such file or directory
vagrant@vagrant-ubuntu-precise-64:~$

It appears ZU.m routine does not exist.
Did I miss an instruction during my install?

> --
> Full post:
> https://www.osehra.org/post/development-tools-discussion-group/successfu...
> Manage my subscriptions: https://www.osehra.org/mailinglist
> Stop emails for this post:
> https://www.osehra.org/mailinglist/unsubscribe/5077

like0

Successfully installed vista need help with testing

Ravi Uppala's picture

I have installed vista docker on my mac and trying to connect to it using terminal.

I am able to connect and use accesscode/Verify as fakedoc1/****.

I am getting following prompt

Select Core Applications <TEST ACCOUNT> Option:

 

what option should I give here? 

 

like0

Successfully installed VistA (via OSEHRA/VAGRANT)... Need...

Arthur Ingram's picture

which docker 

are you following the documentation, 
have you used docker before ?


On Mar 1, 2019, at 4:49 AM, development-tools@groups.osehra.org wrote:



I have installed vista docker on my mac and trying to connect to it using terminal.

I am able to connect and use accesscode/Verify as fakedoc1/****.

I am getting following prompt

Select Core Applications <TEST ACCOUNT> Option:

 

what option should I give here? 

 

--
Full post: https://www.osehra.org/post/development-tools-discussion-group/successfully-installed-vista-osehravagrant-need-help-wconfig
Manage my subscriptions: https://www.osehra.org/groups
Unsubscribe from "Development Tools Discussion Group" Group: https://www.osehra.org/group/node/2942/unsubscribe


like0

I am using this docker.

Ravi Uppala's picture

I am using this docker.

 
 
yes, I have used docker and able to ssh to the docker container following documentation in the above link. 
How do I get access to records? 
like0

Successfully installed VistA (via OSEHRA/VAGRANT)... Need...

Arthur Ingram's picture

try using the root account once login you can su to user account and test password or change it





On Mar 1, 2019, at 5:20 AM, development-tools@groups.osehra.org wrote:



I am using this docker.

 
 
yes, I have used docker and able to ssh to the docker container following documentation in the above link. 
How do I get access to records? 

--
Full post: https://www.osehra.org/post/development-tools-discussion-group/successfully-installed-vista-osehravagrant-need-help-wconfig
Manage my subscriptions: https://www.osehra.org/groups
Unsubscribe from "Development Tools Discussion Group" Group: https://www.osehra.org/group/node/2942/unsubscribe


like0

Successfully installed VistA (via OSEHRA/VAGRANT)... Need...

Sam Habiel's picture
like0

Need help in installing KIDS file and with system manager role

Ravi Uppala's picture

Hi,

I have installed vista docker image and successfully able to login using ssh. Now I need to apply KIDS file to this docker. is there any documentation on how to apply kids file.

How do I assume role systems manager. what login credentials should i use for assuming systems manager. I see Doc, Nurse and other roles but no systems manager role in the menu.

 

Any help would be appreaciated.

 

Thanks

Ravi

like0

Successfully installed VistA (via OSEHRA/VAGRANT)... Need...

Sam Habiel's picture
like0

Need help in installing KIDS file and with system manager role

Ravi Uppala's picture

Thanks Sam. When I try to give access code SM1234 and verify code SM1234!! then it is throwing as invalid access/verify code. I have logged in as osehraprog and got the menu screen by doing D ^ZU.

I am not sure why I am not able to assume system manager role. do i need to login as root for this ?

like0

Successfully installed VistA (via OSEHRA/VAGRANT)... Need...

Sam Habiel's picture
like0